ESPOO, Finland & TOKYO–(BUSINESS WIRE)–IQM Quantum Computers, a global leader in superconducting quantum computers, today announced that TOYO Corporation has purchased a second full-stack quantum computer, IQM Spark. This expands TOYO’s quantum footprint and reinforces IQM’s commitment to driving quantum acceleration in Japan. The Spark system will be installed at TOYO’s R&D center in Kiba, Tokyo, and will be operational in early 2027, enabling hands-on learning from fundamental quantum c
Month: September 2026
ROME–(BUSINESS WIRE)–Exein, the Physical AI cybersecurity company, today announced $270 million in new funding at a $1.7 billion valuation, making it the most valuable cybersecurity startup in Europe. The funding will accelerate Exein’s US and APAC expansion and drive further impacts in Physical AI security: protecting intelligent machines that use AI to perceive, make decisions and act in the physical world, from robots and drones to autonomous vehicles. Exein is also developing a proprietar
Press Release
Telxius boosts global network capacity and efficiency with Nokia 800G Coherent Pluggable deployment
- Telxius is evolving its high-capacity international network with next generation IP-over-DWDM technology to support growing cloud, AI and data center connectivity demands.
- The news follows a joint industry-record demonstration of Nokia ICE-X 800G coherent pluggable optics over Telxius’ BRUSA subsea cable.
- The deployment enables Telxius to reduce power consumption, optimize space utilization and lower the cost of network expansion.
15 September 2026
Madrid, Spain and Espoo, Finland – Telxius and Nokia are collaborating to deploy 800G coherent pluggable optics across Telxius’ terrestrial transport networks in Europe, the United States and Latin America. The deployment supports the continual evolution of Telxius’ network in response to growing customer demand for scalable, high-capacity connectivity across key international network corridors.
Cloud services, AI workloads and data center interconnection are driving rapid traffic growth across global networks, creating pressure for operators. Telxius is leveraging Nokia’s ICE-X 800G ZR/ZR+ coherent pluggable technology to add capacity across its existing terrestrial infrastructure with IP-over-DWDM networking, while reducing the power and space required for network expansion. This increases network efficiency and simplifies operations to deliver resilient, high-performance connectivity for customers.
The deployment also utilizes Nokia network automation, giving Telxius greater visibility and control across its optical transport network. This provides full visibility, fault and performance monitoring, and coordinated service provisioning, supporting faster operations and more predictable service quality for Telxius customers.
This initiative builds on Nokia and Telxius’ recent industry-record setting demonstration of ICE-X 800G ZR+ coherent pluggable optics over the BRUSA subsea cable system. The trial delivered 400Gb/s per wavelength across 5,600+ km, demonstrating the technology’s ability to support ultra-long-haul subsea infrastructure, as well as terrestrial networks.
“At Telxius, we are continuously upgrading our international network to deliver the high-capacity, resilient and energy-efficient connectivity our customers need across the world’s main digital corridors,” said Jesús María Rubio, Chief Technology and Information Officer, Telxius. “This deployment, together with the successful subsea trial on BRUSA, reinforces Telxius’ position at the forefront of optical innovation. It underlines our commitment to adopting advanced technologies early, especially when they bring clear benefits to our customers and our global network”.
“As AI workloads drive unprecedented growth in traffic between hyperscale data centers and global network hubs, operators need transport solutions that combine scalability, efficiency, and operational simplicity,” said Ron Johnson, Senior Vice President and General Manager, Optical Networks at Nokia. “With Nokia’s ICE-X 800G ZR+ coherent pluggable technology and network automation solutions, Telxius can efficiently expand capacity across its terrestrial infrastructure, creating a high-performance foundation for data center interconnection and seamless connectivity between terrestrial and subsea networks.”
Multimedia, technical information and related news
Product Page: ICE-X 800G ZR/ZR+
Product Page: 1830 Global Express (GX)
Product Page: Transcend Network Automation Suite
Web Page: Nokia Optical Networks
Web Page: Network automation page
About Nokia
Nokia is the world’s leading provider of network technology and enables a new era of artificial intelligence. We are developing the networks of the future that connect people, devices and intelligence. Our network solutions span fixed and mobile networks, as well as IP, optical, core, and data center networks. Our secure, AI-native network infrastructure enables the application and utilization of AI on a global scale.
Media inquiries
Nokia Press Office
Email: Press.Services@nokia.com
Follow us on social media
LinkedIn X Instagram Facebook YouTube
About Telxius
Telxius is a global connectivity provider operating a network spanning more than 100,000 km of high-capacity subsea cable systems and terrestrial fiber across Europe and the Americas, connecting key data centers and digital hubs.
Through its integrated network of subsea infrastructure, terrestrial backhaul and landing gateways & edge data centers, Telxius enables hyperscalers, carriers and enterprises to interconnect their infrastructure and scale operations with secure, reliable and high-performance connectivity. Its Tier 1 IP network provides direct global reach, enabling efficient routing and full control over traffic paths.
Telxius offers a comprehensive portfolio of connectivity, infrastructure and interconnection services across Network & Transport, Infrastructure, Internet & Cloud, Interconnection, Security and CDN, supporting a wide range of use cases from enterprise and cloud connectivity to large-scale network interconnection and data transport.
At Telxius, we help our customers operate with predictable performance, dedicated capacity, and the confidence of a network built for increasingly distributed and complex environments.
Telxius press office:
Email: comunicacion@telxius.com
www.telxius.com
Follow us on social media
LinkedIn Twitter & YouTube
LONDON–(BUSINESS WIRE)– Date: 15th September 2026 Not for distribution, directly or indirectly, in or into the United States or any jurisdiction in which such distribution would be unlawful. NATIXIS Pfandbriefbank AG Pre-stabilisation Period Announcement Natixis (contact: Christopher Agathangelou; telephone: 0158550814) hereby gives notice, as Stabilisation Coordinator, that the Stabilisation Manager(s) named below may stabilise the offer of the following securities in accordance with Commis
LONDON–(BUSINESS WIRE)– FORM 8.3 PUBLIC OPENING POSITION DISCLOSURE/DEALING DISCLOSURE BY A PERSON WITH INTERESTS IN RELEVANT SECURITIES REPRESENTING 1% OR MORE Rule 8.3 of the Takeover Code (the “Code”) 1. KEY INFORMATION (a) Full name of discloser: Marathon Asset Management Limited (b) Owner or controller of interests and short positions disclosed, if different from 1(a): The naming of nominee or vehicle companies is insufficient. For a trust, the trustee(s), settlor and beneficiaries must
| Auction | Auction results |
| Auction date | 2026-09-15 |
| Start date | 2026-09-16 |
| Maturity date | 2026-09-23 |
| Interest rate | 1.75 % |
| Offered volume, SEK bn | 470.0 |
| Total bid amount, SEK bn | 371.4 |
| Accepted volume, SEK bn | 371.4 |
| Number of bids | 13 |
| Percentage allotted, % | 100.00 |
LONDON–(BUSINESS WIRE)– FORM 8.3 PUBLIC OPENING POSITION DISCLOSURE/DEALING DISCLOSURE BY A PERSON WITH INTERESTS IN RELEVANT SECURITIES REPRESENTING 1% OR MORE Rule 8.3 of the Takeover Code (the “Code”) 1. KEY INFORMATION (a) Full name of discloser: Marathon Asset Management Limited (b) Owner or controller of interests and short positions disclosed, if different from 1(a): The naming of nominee or vehicle companies is insufficient. For a trust, the trustee(s), settlor and beneficiaries must
Unaudited consolidated sales revenue of Žemaitijos pienas AB for the first six months of 2026 amounts to EUR 171,2 million, in comparison with the 1st half of 2025 the sales revenue increased by 4,57 %.
Net profit (as without audit) of Žemaitijos pienas, AB group for 6 month period of the year 2026, makes 9,7 % of the turnover.
The person authorized to provide additional information:
Head of Legal
Arnas Matuzas
E-mail: a.matuzas@zpienas.lt
The Spring Assembly manufactured by Sòphia HT, a strategic Genenta investment, supports the separation of the launcher’s second and third stages
Sòphia HT has been in serial production of the component since 2018
MILAN, Sept. 15, 2026 (GLOBE NEWSWIRE) — Genenta Science S.p.A. (Nasdaq: GNTA), evolving into Saentra Forge1, a strategic industrial consolidator focused on aerospace, defense, national security and biotechnology, today announced that Sòphia High Tech S.r.l. (Sòphia HT), the Italian aerospace and defense manufacturer in which Genenta made a strategic investment in 2026, contributes to the manufacture of the Spring Assembly used within the second/third-stage separation system of VEGA-C, the European launch vehicle built and operated by Avio. The VV30 mission lifted off at 03:21 CEST on September 15, 2026 from Europe’s Spaceport in Kourou, French Guiana. VV30 carried two European Earth observation satellites, both built by Thales Alenia Space, into a Sun-synchronous orbit: Copernicus Sentinel-3C, the third satellite of the Sentinel-3 mission of the European Union’s Copernicus program, and FLEX, the eighth Earth Explorer mission developed under the European Space Agency’s FutureEO program.
“Behind every successful launch there are components like the Spring Assembly: small, precise and decisive for the flight sequence. This is precisely the kind of industrial capability in which we seek to invest as we build a listed, long-term Italian platform: engineering that has been qualified for flight, produced in series for years and trusted by Europe’s leading space programs. Every VEGA-C flight highlights the great value of the aerospace sector in Italy,” said Pierluigi Paracchi, CEO of Genenta.
“Since 2018, every Spring Assembly we deliver for VEGA-C has had to meet the same requirement: a mechanical response that is identical, flight after flight. That consistency is not something you achieve once. It is built into how we control materials, geometry and process at every step of production. For a component that acts during a few decisive seconds of the mission, this is what reliability means, and it is the standard our team is proud to uphold,” said Antonio Caraviello, CEO of Sòphia HT.
Spring Assembly for VEGA-C: Precision Engineering Supporting Stage Separation
Installed in the interstage connecting the Zefiro 40 second stage to the Zefiro 9 third stage, the Spring Assembly performs an essential function during one of the most critical phases of flight: the controlled separation of the two stages.
During launch, the system remains in a restrained configuration, storing elastic energy. At the designated point in the mission sequence, following activation of the interstage separation device, this energy is released rapidly and in a controlled manner. The resulting force initiates the separation of the exhausted second stage from the third stage, enabling the mission to continue under the required kinematic conditions.
The coordinated action of the Spring Assemblies, together with the associated guidance system, promotes a smooth and axial translation of the separated structures. This behavior is essential to limiting unwanted rotation, potential interference and abnormal mechanical loads during separation.
The component must deliver a precise and repeatable mechanical response even after exposure to the severe conditions experienced during launch, including vibrations, structural loads, pyrotechnic shocks and temperature variations.
Manufacturing the Spring Assembly therefore requires rigorous control of its geometry, tolerances, materials and elastic characteristics. Every element must provide reliability, consistent performance and full integration with the interstage structure. Sòphia HT has been engaged in the serial production of these components since 2018; consequently, production repeatability is also of fundamental importance to the mission’s success.
Relatively compact in size yet essential to the correct execution of the flight sequence, the Spring Assembly is a tangible example of how precision engineering, advanced manufacturing expertise and strict process control contribute to the reliability of European space missions.
About Genenta Science
Genenta (Nasdaq: GNTA) is evolving into a next-generation strategic consolidator focused on privately held specialized companies operating in Italian national security-regulated sectors, with activities spanning cybersecurity, defense, aerospace, and biotechnology/biosecurity.
About Sòphia High Tech
Sòphia High Tech S.r.l. is an Italian aerospace and defense engineering and manufacturing company. At its core, Sòphia builds the critical mechanical components of space and defense systems — the precision parts that hold rockets together, protect satellites in orbit, and allow aircraft to perform under extreme stress. The company covers the entire product lifecycle, from initial concept design and computer simulation, through prototyping and manufacturing, all the way to final testing, assembly, and qualification for flight. What sets Sòphia apart is its mastery of advanced manufacturing techniques — including state-of-the-art metal 3D printing (known as Selective Laser Melting), CNC precision machining and multitasking, and the ability to work with some of the most demanding exotic materials in the industry, including titanium, Inconel, tungsten, and specialized copper alloys. The company also conducts original materials research — developing entirely new metallic blends tailored to the specific demands of space propulsion. Certified to the EN9100 aerospace quality standard and to ECSS-Q-ST-70-80C, the ESA specification for additive manufacturing, Sòphia is one of the very few companies in Europe qualified to 3D-print flight-ready space hardware to ESA and NASA standards. With over 530 advanced projects completed, Sòphia serves leading European aerospace and defense organizations including ESA, AVIO, Thales Alenia Space, Leonardo, MBDA, GSSI, and D-Orbit.
Forward-Looking Statements. Statements in this press release contain “forward-looking statements,” within the meaning of the U.S. Private Securities Litigation Reform Act of 1995, that are subject to substantial risks and uncertainties. All statements, other than statements of historical fact, contained in this press release are forward-looking statements. Forward-looking statements contained in this press release may be identified by the use of words such as “anticipate,” “believe,” “contemplate,” “could,” “estimate,” “expect,” “intend,” “seek,” “may,” “might,” “plan,” “potential,” “predict,” “project,” “suggest,” “target,” “aim,” “should,” “will,” “would,” or the negative of these words or other similar expressions, although not all forward-looking statements contain these words. Forward-looking statements are based on Genenta’s current expectations and are subject to inherent uncertainties, risks, and assumptions that are difficult to predict, including risks related to the transition to Saentra Forge, the ability to close the transaction with Sòphia High Tech, financial forecasts of Sòphia High Tech, and expected use of proceeds of Sòphia High Tech. Further, certain forward-looking statements are based on assumptions as to future events that may not prove to be accurate. These and other risks and uncertainties are described more fully in the section titled “Risk Factors” in Genenta’s Annual Report on Form 20-F for the year ended December 31, 2024, and Genenta’s material disclosures on Form 6-K dated October 10, 2025, as well as other Form 6-K disclosures filed with the Securities and Exchange Commission. Forward-looking statements contained in this announcement are made as of the date of this announcement, and Genenta undertakes no duty to update such information except as required under applicable law.
Genenta Media Contact: Tiziana Pollio. Mobile: +39 348 23 15 143 Email: tiziana.pollio@genenta.com
___________________________
1 The name change from Genenta Science S.p.A. to Saentra Forge S.p.A. is subject to shareholder approval.
15 September 2026
New final terms for Euro Medium Term Note – Nykredit Realkredit A/S
Programme
Nykredit Realkredit A/S publishes final terms for an issue of EUR 500,000,000 3.875 per cent. Senior Non-Preferred Notes due 16 September 2030, which are issued pursuant to Nykredit Realkredit A/S’s €15,000,000,000 Euro Medium Term Note Programme dated 8 May 2025.
The final terms dated 14 September 2026 and the Euro Medium Term Note Programme dated 8 May 2026 are available for download on Nykredit’s website at nykredit.com/ir.
Enquiries may be addressed to Nykredit Realkredit A/S, Group Treasury, Morten Lisberg, Head of Group Treasury, tel +45 44 55 10 77, or Morten Bækmand Nielsen, Head of Investor Relations, tel +45 44 55 15 21.
Attachment
