Tag: PR Newswire

SHANGHAI, April 18, 2026 /PRNewswire/ — JinkoSolar, the global leading PV and ESS supplier, has officially launched a lightweight module solution specifically designed for low-load-bearing roofs—the Jinko “Light Diamond” lightweight, high-strength module, based on its Tiger Neo 3.0 technology platform.

Module weight: 16.2 kg
Module dimensions: 1980 × 1134 × 30 mm
Weight density: 7 kg/m²— 40% weight reduction compared with conventional double-glass modules (12.2 kg/m²);
Maximum power: 560 W;
Maximum module efficiency: 24.94%
Applications: Suitable for older factory buildings, temporary structures, light-gauge steel roofs, power plant coal sheds, and buildings with load restrictions.

Five Key Advantages:

Advantage 1: Ultra-Lightweight with Guaranteed Strength

JinkoSolar’s “Light Diamond” lightweight, high-strength modules weigh only 7 kg per square meter, representing a weight reduction of over 40% compared to conventional double-glass modules. The total module weight for a 1 MW project is only 28.6 tons, a reduction of approximately 20 tons compared to BC double-glass modules. This means that a large number of roofs that previously required reinforcement or were unsuitable for installation can now be directly fitted with solar panels without any structural modifications.

Advantage 2: 24.94% High Efficiency—Lightweight and High-Performance

A common flaw among most lightweight modules on the market is that they prioritize weight reduction at the expense of power generation efficiency. JinkoSolar’s “Light Diamond” lightweight, high-strength modules break this trade-off.

JinkoSolar’s “Light Diamond” lightweight, high-strength modules deliver a maximum power output of 560 watts and an ultra-high efficiency of 24.94%, whereas flexible modules or BC composite modules only reach 450 to 460 watts—a single-module power increase of over 100 watts. This means a higher-capacity solar power plant can be installed on the same roof area. More importantly, the higher power output directly leads to optimized system costs: fewer modules are required, reducing Balance of System (BOS) costs for mounting structures, cables, combiner boxes, and other components; installation time is shortened, lowering labor costs; and overall BOS costs are further reduced by 3% to 5% compared to conventional lightweight solutions.

This is not a lightweight module born of compromise, but a high-efficiency module that takes performance to the next level.

 Advantage 3: Reduced Weight Without Compromising Quality—Backed by a 30-Year Power Warranty

The key concern with lightweight modules is whether their reduced weight compromises reliability. JinkoSolar’s “Light Diamond” lightweight, high-strength modules address this concern with technology and data.

In terms of structural reinforcement, the modules utilize 1.6mm lightweight glass to reduce weight while maintaining light transmittance; the frame features reinforced channel design with increased thickness, enhancing overall mechanical strength; and the encapsulation process uses reinforced adhesive film, significantly improving sealing performance, resistance to humidity and heat, and resistance to micro-cracks.

In terms of load certification, the maximum front-side load capacity is 3,600 Pa—equivalent to withstanding 3.6 meters of snow accumulation—and the module can withstand impacts from 25mm hailstones without damage. The maximum back-side load capacity is 2,400 Pa, equivalent to withstanding Category 12 winds. In the face of extreme weather, it provides a robust safety barrier.

In terms of long-term reliability metrics, the temperature coefficient is -0.26%/°C, resulting in lower power generation losses at high temperatures; the power output warranty spans 30 years, which is 12–15 years longer than that of flexible or composite modules; first-year degradation does not exceed 1%, with annual degradation of 0.35%, both of which outperform industry averages.

Advantage 4: Save Money, Time, and Effort

The lightweight design of JinkoSolar’s “Light Diamond” lightweight, high-strength modules not only reduces physical weight but also systematically optimizes total lifecycle costs.

Compared to conventional module reinforcement solutions, JinkoSolar’s “Light Diamond” lightweight, high-strength modules save approximately 0.5 yuan per watt in reinforcement costs, equivalent to a savings of about 500,000 yuan per MW. The construction period is reduced from over 40 days to 8–10 days—a 75% reduction. There is no need to halt production, thereby avoiding operational losses, and the approval process is simplified, eliminating the need for structural modification approvals.

Taking a 1 MW project as an example, the savings on reinforcement costs amount to approximately 500,000 yuan, the construction period is shortened by more than 30 days, and the avoided production downtime losses—which can reach hundreds of thousands of yuan depending on the company’s scale—significantly boost the project’s internal rate of return (IRR) and markedly shorten the payback period. For retrofit projects involving older factory buildings, the greatest advantage of Jinko’s “Light Diamond” lightweight, high-strength modules is that installation can proceed without halting production; companies can maintain normal operations while the solar power plant is installed on the roof simultaneously, ensuring both objectives are met.

Advantage 5: Strong Demand, a Blue Ocean Market

According to industry statistics, China has over 6 billion square meters of existing commercial and industrial rooftop space, with load-restricted roofs accounting for more than 30% of this total—representing a potential market of nearly 2 billion square meters. Based on an installation density of 100 watts per square meter and a system cost of 1.5 yuan per watt, the theoretical installation capacity exceeds 200 GW, with a market size surpassing 300 billion yuan.

The renovation of old factory buildings, the upgrading of cultural and creative parks, and distributed solar systems on light-gauge steel roofs—these scenarios that were previously unsuitable for installation are now becoming a new blue ocean for PV growth. Whoever can be the first to deliver truly reliable products will be able to capture this market.

Application Scenarios

1) Renovation of Old Industrial Buildings: This is the primary application scenario. Industrial buildings constructed in the last century, as well as power plant coal sheds, carports, and simple rural supermarkets, often have limited roof load-bearing capacity and structurally deteriorated roofs that cannot safely support additional weight. Jinko’s “Light Diamond” lightweight, high-strength modules can be installed without structural reinforcement and do not disrupt production during renovation, making them the preferred solution for the green retrofitting of old industrial buildings.

2) Cultural and Creative Parks and Commercial Complexes: With insufficient roof load-bearing capacity, the need to maintain operations, and aesthetic requirements, Jinko’s “Light Diamond” lightweight, high-strength modules—which are lightweight, efficient, and reliable—are a perfect fit for these scenarios.

3) Light-Gauge Steel Roofs and Color-Coated Steel Sheet Roofs: Light-gauge steel roofs, commonly used in modern industrial facilities, inherently lack sufficient load-bearing capacity. Jinko’s “Light Diamond” lightweight, high-strength modules, weighing just 7 kg per square meter, enable the installation of solar panels on these roofs.

4) Special buildings with load restrictions: Such as space frame structures, arched roofs, and agricultural greenhouses, Jinko’s “Light Diamond” lightweight, high-strength modules can easily adapt to these structures.

View original content to download multimedia:https://www.prnewswire.com/news-releases/jinkosolar-officially-launches-light-diamond-lightweight-high-strength-module-302746484.html

SOURCE JinkoSolar

SHANGHAI, April 18, 2026 /PRNewswire/ — JinkoSolar, the global leading PV and ESS supplier, has officially launched a lightweight module solution specifically designed for low-load-bearing roofs—the Jinko “Light Diamond” lightweight, high-strength module, based on its Tiger Neo 3.0 technology platform.

Module weight: 16.2 kg
Module dimensions: 1980 × 1134 × 30 mm
Weight density: 7 kg/m²— 40% weight reduction compared with conventional double-glass modules (12.2 kg/m²);
Maximum power: 560 W;
Maximum module efficiency: 24.94%
Applications: Suitable for older factory buildings, temporary structures, light-gauge steel roofs, power plant coal sheds, and buildings with load restrictions.

Five Key Advantages:

Advantage 1: Ultra-Lightweight with Guaranteed Strength

JinkoSolar’s “Light Diamond” lightweight, high-strength modules weigh only 7 kg per square meter, representing a weight reduction of over 40% compared to conventional double-glass modules. The total module weight for a 1 MW project is only 28.6 tons, a reduction of approximately 20 tons compared to BC double-glass modules. This means that a large number of roofs that previously required reinforcement or were unsuitable for installation can now be directly fitted with solar panels without any structural modifications.

Advantage 2: 24.94% High Efficiency—Lightweight and High-Performance

A common flaw among most lightweight modules on the market is that they prioritize weight reduction at the expense of power generation efficiency. JinkoSolar’s “Light Diamond” lightweight, high-strength modules break this trade-off.

JinkoSolar’s “Light Diamond” lightweight, high-strength modules deliver a maximum power output of 560 watts and an ultra-high efficiency of 24.94%, whereas flexible modules or BC composite modules only reach 450 to 460 watts—a single-module power increase of over 100 watts. This means a higher-capacity solar power plant can be installed on the same roof area. More importantly, the higher power output directly leads to optimized system costs: fewer modules are required, reducing Balance of System (BOS) costs for mounting structures, cables, combiner boxes, and other components; installation time is shortened, lowering labor costs; and overall BOS costs are further reduced by 3% to 5% compared to conventional lightweight solutions.

This is not a lightweight module born of compromise, but a high-efficiency module that takes performance to the next level.

 Advantage 3: Reduced Weight Without Compromising Quality—Backed by a 30-Year Power Warranty

The key concern with lightweight modules is whether their reduced weight compromises reliability. JinkoSolar’s “Light Diamond” lightweight, high-strength modules address this concern with technology and data.

In terms of structural reinforcement, the modules utilize 1.6mm lightweight glass to reduce weight while maintaining light transmittance; the frame features reinforced channel design with increased thickness, enhancing overall mechanical strength; and the encapsulation process uses reinforced adhesive film, significantly improving sealing performance, resistance to humidity and heat, and resistance to micro-cracks.

In terms of load certification, the maximum front-side load capacity is 3,600 Pa—equivalent to withstanding 3.6 meters of snow accumulation—and the module can withstand impacts from 25mm hailstones without damage. The maximum back-side load capacity is 2,400 Pa, equivalent to withstanding Category 12 winds. In the face of extreme weather, it provides a robust safety barrier.

In terms of long-term reliability metrics, the temperature coefficient is -0.26%/°C, resulting in lower power generation losses at high temperatures; the power output warranty spans 30 years, which is 12–15 years longer than that of flexible or composite modules; first-year degradation does not exceed 1%, with annual degradation of 0.35%, both of which outperform industry averages.

Advantage 4: Save Money, Time, and Effort

The lightweight design of JinkoSolar’s “Light Diamond” lightweight, high-strength modules not only reduces physical weight but also systematically optimizes total lifecycle costs.

Compared to conventional module reinforcement solutions, JinkoSolar’s “Light Diamond” lightweight, high-strength modules save approximately 0.5 yuan per watt in reinforcement costs, equivalent to a savings of about 500,000 yuan per MW. The construction period is reduced from over 40 days to 8–10 days—a 75% reduction. There is no need to halt production, thereby avoiding operational losses, and the approval process is simplified, eliminating the need for structural modification approvals.

Taking a 1 MW project as an example, the savings on reinforcement costs amount to approximately 500,000 yuan, the construction period is shortened by more than 30 days, and the avoided production downtime losses—which can reach hundreds of thousands of yuan depending on the company’s scale—significantly boost the project’s internal rate of return (IRR) and markedly shorten the payback period. For retrofit projects involving older factory buildings, the greatest advantage of Jinko’s “Light Diamond” lightweight, high-strength modules is that installation can proceed without halting production; companies can maintain normal operations while the solar power plant is installed on the roof simultaneously, ensuring both objectives are met.

Advantage 5: Strong Demand, a Blue Ocean Market

According to industry statistics, China has over 6 billion square meters of existing commercial and industrial rooftop space, with load-restricted roofs accounting for more than 30% of this total—representing a potential market of nearly 2 billion square meters. Based on an installation density of 100 watts per square meter and a system cost of 1.5 yuan per watt, the theoretical installation capacity exceeds 200 GW, with a market size surpassing 300 billion yuan.

The renovation of old factory buildings, the upgrading of cultural and creative parks, and distributed solar systems on light-gauge steel roofs—these scenarios that were previously unsuitable for installation are now becoming a new blue ocean for PV growth. Whoever can be the first to deliver truly reliable products will be able to capture this market.

Application Scenarios

1) Renovation of Old Industrial Buildings: This is the primary application scenario. Industrial buildings constructed in the last century, as well as power plant coal sheds, carports, and simple rural supermarkets, often have limited roof load-bearing capacity and structurally deteriorated roofs that cannot safely support additional weight. Jinko’s “Light Diamond” lightweight, high-strength modules can be installed without structural reinforcement and do not disrupt production during renovation, making them the preferred solution for the green retrofitting of old industrial buildings.

2) Cultural and Creative Parks and Commercial Complexes: With insufficient roof load-bearing capacity, the need to maintain operations, and aesthetic requirements, Jinko’s “Light Diamond” lightweight, high-strength modules—which are lightweight, efficient, and reliable—are a perfect fit for these scenarios.

3) Light-Gauge Steel Roofs and Color-Coated Steel Sheet Roofs: Light-gauge steel roofs, commonly used in modern industrial facilities, inherently lack sufficient load-bearing capacity. Jinko’s “Light Diamond” lightweight, high-strength modules, weighing just 7 kg per square meter, enable the installation of solar panels on these roofs.

4) Special buildings with load restrictions: Such as space frame structures, arched roofs, and agricultural greenhouses, Jinko’s “Light Diamond” lightweight, high-strength modules can easily adapt to these structures.

View original content to download multimedia:https://www.prnewswire.com/news-releases/jinkosolar-officially-launches-light-diamond-lightweight-high-strength-module-302746484.html

SOURCE JinkoSolar

SHANGHAI, April 18, 2026 /PRNewswire/ — JinkoSolar, the global leading PV and ESS supplier, has officially launched a lightweight module solution specifically designed for low-load-bearing roofs—the Jinko “Light Diamond” lightweight, high-strength module, based on its Tiger Neo 3.0 technology platform.

Module weight: 16.2 kg
Module dimensions: 1980 × 1134 × 30 mm
Weight density: 7 kg/m²— 40% weight reduction compared with conventional double-glass modules (12.2 kg/m²);
Maximum power: 560 W;
Maximum module efficiency: 24.94%
Applications: Suitable for older factory buildings, temporary structures, light-gauge steel roofs, power plant coal sheds, and buildings with load restrictions.

Five Key Advantages:

Advantage 1: Ultra-Lightweight with Guaranteed Strength

JinkoSolar’s “Light Diamond” lightweight, high-strength modules weigh only 7 kg per square meter, representing a weight reduction of over 40% compared to conventional double-glass modules. The total module weight for a 1 MW project is only 28.6 tons, a reduction of approximately 20 tons compared to BC double-glass modules. This means that a large number of roofs that previously required reinforcement or were unsuitable for installation can now be directly fitted with solar panels without any structural modifications.

Advantage 2: 24.94% High Efficiency—Lightweight and High-Performance

A common flaw among most lightweight modules on the market is that they prioritize weight reduction at the expense of power generation efficiency. JinkoSolar’s “Light Diamond” lightweight, high-strength modules break this trade-off.

JinkoSolar’s “Light Diamond” lightweight, high-strength modules deliver a maximum power output of 560 watts and an ultra-high efficiency of 24.94%, whereas flexible modules or BC composite modules only reach 450 to 460 watts—a single-module power increase of over 100 watts. This means a higher-capacity solar power plant can be installed on the same roof area. More importantly, the higher power output directly leads to optimized system costs: fewer modules are required, reducing Balance of System (BOS) costs for mounting structures, cables, combiner boxes, and other components; installation time is shortened, lowering labor costs; and overall BOS costs are further reduced by 3% to 5% compared to conventional lightweight solutions.

This is not a lightweight module born of compromise, but a high-efficiency module that takes performance to the next level.

 Advantage 3: Reduced Weight Without Compromising Quality—Backed by a 30-Year Power Warranty

The key concern with lightweight modules is whether their reduced weight compromises reliability. JinkoSolar’s “Light Diamond” lightweight, high-strength modules address this concern with technology and data.

In terms of structural reinforcement, the modules utilize 1.6mm lightweight glass to reduce weight while maintaining light transmittance; the frame features reinforced channel design with increased thickness, enhancing overall mechanical strength; and the encapsulation process uses reinforced adhesive film, significantly improving sealing performance, resistance to humidity and heat, and resistance to micro-cracks.

In terms of load certification, the maximum front-side load capacity is 3,600 Pa—equivalent to withstanding 3.6 meters of snow accumulation—and the module can withstand impacts from 25mm hailstones without damage. The maximum back-side load capacity is 2,400 Pa, equivalent to withstanding Category 12 winds. In the face of extreme weather, it provides a robust safety barrier.

In terms of long-term reliability metrics, the temperature coefficient is -0.26%/°C, resulting in lower power generation losses at high temperatures; the power output warranty spans 30 years, which is 12–15 years longer than that of flexible or composite modules; first-year degradation does not exceed 1%, with annual degradation of 0.35%, both of which outperform industry averages.

Advantage 4: Save Money, Time, and Effort

The lightweight design of JinkoSolar’s “Light Diamond” lightweight, high-strength modules not only reduces physical weight but also systematically optimizes total lifecycle costs.

Compared to conventional module reinforcement solutions, JinkoSolar’s “Light Diamond” lightweight, high-strength modules save approximately 0.5 yuan per watt in reinforcement costs, equivalent to a savings of about 500,000 yuan per MW. The construction period is reduced from over 40 days to 8–10 days—a 75% reduction. There is no need to halt production, thereby avoiding operational losses, and the approval process is simplified, eliminating the need for structural modification approvals.

Taking a 1 MW project as an example, the savings on reinforcement costs amount to approximately 500,000 yuan, the construction period is shortened by more than 30 days, and the avoided production downtime losses—which can reach hundreds of thousands of yuan depending on the company’s scale—significantly boost the project’s internal rate of return (IRR) and markedly shorten the payback period. For retrofit projects involving older factory buildings, the greatest advantage of Jinko’s “Light Diamond” lightweight, high-strength modules is that installation can proceed without halting production; companies can maintain normal operations while the solar power plant is installed on the roof simultaneously, ensuring both objectives are met.

Advantage 5: Strong Demand, a Blue Ocean Market

According to industry statistics, China has over 6 billion square meters of existing commercial and industrial rooftop space, with load-restricted roofs accounting for more than 30% of this total—representing a potential market of nearly 2 billion square meters. Based on an installation density of 100 watts per square meter and a system cost of 1.5 yuan per watt, the theoretical installation capacity exceeds 200 GW, with a market size surpassing 300 billion yuan.

The renovation of old factory buildings, the upgrading of cultural and creative parks, and distributed solar systems on light-gauge steel roofs—these scenarios that were previously unsuitable for installation are now becoming a new blue ocean for PV growth. Whoever can be the first to deliver truly reliable products will be able to capture this market.

Application Scenarios

1) Renovation of Old Industrial Buildings: This is the primary application scenario. Industrial buildings constructed in the last century, as well as power plant coal sheds, carports, and simple rural supermarkets, often have limited roof load-bearing capacity and structurally deteriorated roofs that cannot safely support additional weight. Jinko’s “Light Diamond” lightweight, high-strength modules can be installed without structural reinforcement and do not disrupt production during renovation, making them the preferred solution for the green retrofitting of old industrial buildings.

2) Cultural and Creative Parks and Commercial Complexes: With insufficient roof load-bearing capacity, the need to maintain operations, and aesthetic requirements, Jinko’s “Light Diamond” lightweight, high-strength modules—which are lightweight, efficient, and reliable—are a perfect fit for these scenarios.

3) Light-Gauge Steel Roofs and Color-Coated Steel Sheet Roofs: Light-gauge steel roofs, commonly used in modern industrial facilities, inherently lack sufficient load-bearing capacity. Jinko’s “Light Diamond” lightweight, high-strength modules, weighing just 7 kg per square meter, enable the installation of solar panels on these roofs.

4) Special buildings with load restrictions: Such as space frame structures, arched roofs, and agricultural greenhouses, Jinko’s “Light Diamond” lightweight, high-strength modules can easily adapt to these structures.

View original content to download multimedia:https://www.prnewswire.com/news-releases/jinkosolar-officially-launches-light-diamond-lightweight-high-strength-module-302746484.html

SOURCE JinkoSolar

SHANGHAI, April 18, 2026 /PRNewswire/ — JinkoSolar, the global leading PV and ESS supplier, has officially launched a lightweight module solution specifically designed for low-load-bearing roofs—the Jinko “Light Diamond” lightweight, high-strength module, based on its Tiger Neo 3.0 technology platform.

Module weight: 16.2 kg
Module dimensions: 1980 × 1134 × 30 mm
Weight density: 7 kg/m²— 40% weight reduction compared with conventional double-glass modules (12.2 kg/m²);
Maximum power: 560 W;
Maximum module efficiency: 24.94%
Applications: Suitable for older factory buildings, temporary structures, light-gauge steel roofs, power plant coal sheds, and buildings with load restrictions.

Five Key Advantages:

Advantage 1: Ultra-Lightweight with Guaranteed Strength

JinkoSolar’s “Light Diamond” lightweight, high-strength modules weigh only 7 kg per square meter, representing a weight reduction of over 40% compared to conventional double-glass modules. The total module weight for a 1 MW project is only 28.6 tons, a reduction of approximately 20 tons compared to BC double-glass modules. This means that a large number of roofs that previously required reinforcement or were unsuitable for installation can now be directly fitted with solar panels without any structural modifications.

Advantage 2: 24.94% High Efficiency—Lightweight and High-Performance

A common flaw among most lightweight modules on the market is that they prioritize weight reduction at the expense of power generation efficiency. JinkoSolar’s “Light Diamond” lightweight, high-strength modules break this trade-off.

JinkoSolar’s “Light Diamond” lightweight, high-strength modules deliver a maximum power output of 560 watts and an ultra-high efficiency of 24.94%, whereas flexible modules or BC composite modules only reach 450 to 460 watts—a single-module power increase of over 100 watts. This means a higher-capacity solar power plant can be installed on the same roof area. More importantly, the higher power output directly leads to optimized system costs: fewer modules are required, reducing Balance of System (BOS) costs for mounting structures, cables, combiner boxes, and other components; installation time is shortened, lowering labor costs; and overall BOS costs are further reduced by 3% to 5% compared to conventional lightweight solutions.

This is not a lightweight module born of compromise, but a high-efficiency module that takes performance to the next level.

 Advantage 3: Reduced Weight Without Compromising Quality—Backed by a 30-Year Power Warranty

The key concern with lightweight modules is whether their reduced weight compromises reliability. JinkoSolar’s “Light Diamond” lightweight, high-strength modules address this concern with technology and data.

In terms of structural reinforcement, the modules utilize 1.6mm lightweight glass to reduce weight while maintaining light transmittance; the frame features reinforced channel design with increased thickness, enhancing overall mechanical strength; and the encapsulation process uses reinforced adhesive film, significantly improving sealing performance, resistance to humidity and heat, and resistance to micro-cracks.

In terms of load certification, the maximum front-side load capacity is 3,600 Pa—equivalent to withstanding 3.6 meters of snow accumulation—and the module can withstand impacts from 25mm hailstones without damage. The maximum back-side load capacity is 2,400 Pa, equivalent to withstanding Category 12 winds. In the face of extreme weather, it provides a robust safety barrier.

In terms of long-term reliability metrics, the temperature coefficient is -0.26%/°C, resulting in lower power generation losses at high temperatures; the power output warranty spans 30 years, which is 12–15 years longer than that of flexible or composite modules; first-year degradation does not exceed 1%, with annual degradation of 0.35%, both of which outperform industry averages.

Advantage 4: Save Money, Time, and Effort

The lightweight design of JinkoSolar’s “Light Diamond” lightweight, high-strength modules not only reduces physical weight but also systematically optimizes total lifecycle costs.

Compared to conventional module reinforcement solutions, JinkoSolar’s “Light Diamond” lightweight, high-strength modules save approximately 0.5 yuan per watt in reinforcement costs, equivalent to a savings of about 500,000 yuan per MW. The construction period is reduced from over 40 days to 8–10 days—a 75% reduction. There is no need to halt production, thereby avoiding operational losses, and the approval process is simplified, eliminating the need for structural modification approvals.

Taking a 1 MW project as an example, the savings on reinforcement costs amount to approximately 500,000 yuan, the construction period is shortened by more than 30 days, and the avoided production downtime losses—which can reach hundreds of thousands of yuan depending on the company’s scale—significantly boost the project’s internal rate of return (IRR) and markedly shorten the payback period. For retrofit projects involving older factory buildings, the greatest advantage of Jinko’s “Light Diamond” lightweight, high-strength modules is that installation can proceed without halting production; companies can maintain normal operations while the solar power plant is installed on the roof simultaneously, ensuring both objectives are met.

Advantage 5: Strong Demand, a Blue Ocean Market

According to industry statistics, China has over 6 billion square meters of existing commercial and industrial rooftop space, with load-restricted roofs accounting for more than 30% of this total—representing a potential market of nearly 2 billion square meters. Based on an installation density of 100 watts per square meter and a system cost of 1.5 yuan per watt, the theoretical installation capacity exceeds 200 GW, with a market size surpassing 300 billion yuan.

The renovation of old factory buildings, the upgrading of cultural and creative parks, and distributed solar systems on light-gauge steel roofs—these scenarios that were previously unsuitable for installation are now becoming a new blue ocean for PV growth. Whoever can be the first to deliver truly reliable products will be able to capture this market.

Application Scenarios

1) Renovation of Old Industrial Buildings: This is the primary application scenario. Industrial buildings constructed in the last century, as well as power plant coal sheds, carports, and simple rural supermarkets, often have limited roof load-bearing capacity and structurally deteriorated roofs that cannot safely support additional weight. Jinko’s “Light Diamond” lightweight, high-strength modules can be installed without structural reinforcement and do not disrupt production during renovation, making them the preferred solution for the green retrofitting of old industrial buildings.

2) Cultural and Creative Parks and Commercial Complexes: With insufficient roof load-bearing capacity, the need to maintain operations, and aesthetic requirements, Jinko’s “Light Diamond” lightweight, high-strength modules—which are lightweight, efficient, and reliable—are a perfect fit for these scenarios.

3) Light-Gauge Steel Roofs and Color-Coated Steel Sheet Roofs: Light-gauge steel roofs, commonly used in modern industrial facilities, inherently lack sufficient load-bearing capacity. Jinko’s “Light Diamond” lightweight, high-strength modules, weighing just 7 kg per square meter, enable the installation of solar panels on these roofs.

4) Special buildings with load restrictions: Such as space frame structures, arched roofs, and agricultural greenhouses, Jinko’s “Light Diamond” lightweight, high-strength modules can easily adapt to these structures.

View original content to download multimedia:https://www.prnewswire.com/news-releases/jinkosolar-officially-launches-light-diamond-lightweight-high-strength-module-302746484.html

SOURCE JinkoSolar

NOVATO, Calif., April 17, 2026 /PRNewswire/ — Brayton Purcell LLP today announced it is continuing and expanding its California work supporting a petition submitted to the Cal/OSHA Standards Board by the Western Occupational and Environmental Medicine Association (WOEMA) seeking to prohibit the fabrication of artificial stone containing more than 1% crystalline silica, while also calling public attention to a new Capital & Main investigation on federal legislation that would restrict legal claims involving artificial stone manufacturers.

The Capital & Main report —“As Worker Silicosis Deaths Mount, GOP Moves to Shield Companies From Liability,” published April 13, 2026, by Semantha Raquel Norris — describes the accelerating national crisis of artificial stone silicosis and examines proposed federal legislation introduced by U.S. Reps. Tom McClintock (R–CA) and Andy Biggs (R–AZ) that would bar certain civil lawsuits against artificial stone slab manufacturers and sellers.

Brayton Purcell LLP’s Direct Involvement: Representation and On–the–Ground Case Data

Brayton Purcell LLP currently represents more than 700 artificial stone fabrication workers, and the firm’s experience indicates that publicly reported case totals may significantly understate the scope of the disease.

The report states, “James Nevin [of Brayton Purcell LLP], an attorney representing more than 500 stone fabrication workers in California and another 200 nationally, claimed that this is a severe undercount and said his law firm’s own data suggests the actual number of silicosis cases are much higher.”

“It’s not a few bad actors. It’s a majority of the shops, including the very sophisticated shops,” Nevin said, pointing to clients in Colorado who developed silicosis after working in a fabrication shop with “state–of–the–art equipment.”

The Capital & Main investigation further reports that public health experts agree official totals in California are likely an undercount, and that the California Department of Public Health has stated it does not estimate the percentage of fabrication shops where individuals with reported silicosis cases have worked.

Why the Cal/OSHA Petition Matters in California

WOEMA — an association of occupational and environmental medicine physicians — submitted a petition to Cal/OSHA requesting a prohibition on artificial stone slabs containing more than 1% crystalline silica, citing the rapid rise of severe lung disease in countertop fabrication workers and the limitations of existing controls in preventing disease.

Brayton Purcell LLP has supported the WOEMA petition through advocacy and public education, including formal participation in Cal/OSHA Standards Board proceedings and ongoing outreach regarding the health hazards associated with fabricating high–silica artificial stone.

Artificial Stone Silicosis: Product Hazard at Issue

Artificial stone (also referred to as quartz or engineered stone) is composed of at least 90% silica, and the silica particles released during fabrication are nano–sized; the remaining approximate 10% of the product consists of volatile organic compounds (VOCs) including highly toxic resins, dyes and glues.

The Capital & Main report notes that silicosis develops when workers inhale respirable crystalline silica dust, which scars and constricts the lungs; in extreme cases, lung transplantation is required. The report states that in California alone, artificial stone–related silicosis has killed at least 29 people and sickened more than 500.

Federal Liability Shield Raises Accountability Concerns

The Capital & Main investigation describes the push for federal legislation that would restrict product liability claims against artificial stone manufacturers and sellers and includes Nevin’s criticism of the proposed approach.

“But Nevin said that the bill to grant quartz manufacturers legal immunity would protect ‘foreign companies and a big MAGA Trump donor … at the cost of the lives of fabrication workers in the U.S.'”

Nevin also emphasized the historic role that civil litigation has played in driving safer industrial practices: “The only thing that has ever gotten industry to change their ways and take the carcinogens and toxins out of their products is third–party civil lawsuits,” he said, comparing current artificial stone silicosis cases to earlier asbestos litigation.

Read the Full Investigation

Brayton Purcell LLP encourages members of the media, public health community, and policymakers to review the full investigation into the medical and legal issues surrounding artificial stone silicosis and proposed federal liability protections.

Full article (Capital & Main):
 As Worker Silicosis Deaths Mount, GOP Moves to Shield Companies From Liability [capitalandmain.com]

About Brayton Purcell LLP

Brayton Purcell LLP is a nationally recognized law firm with an established focus on representing individuals diagnosed with serious occupational diseases, including artificial stone silicosis caused by crystalline silica dust exposure. The firm is known for its accomplished and knowledgeable attorneys and its professional advocacy on behalf of workers and families affected by toxic exposures.

Media Contact:
Nolan Lowry
nlowry@braytonlaw.com
415–399–3107

View original content to download multimedia:https://www.prnewswire.com/news-releases/brayton-purcell-llp-announces-expanded-california-effort-supporting-calosha-petition-to-prohibit-highsilica-artificial-stone-highlights-capital–main-investigation-on-federal-liability-shield-302746328.html

SOURCE Brayton Purcell LLP

BOONE, N.C., April 17, 2026 /PRNewswire/ — On Tuesday, Typhoon Sinlaku, the strongest tropical cyclone this year, devastated the Northern Mariana Islands. Saipan and Tinian were hardest hit. The powerful storm ripped roofs off houses and caused severe flooding with some hard-hit areas estimated to be without power and water for weeks to come. Samaritan’s Purse immediately began coordinating with partners on the ground to deliver emergency relief supplies and respond in Jesus’ Name.

Tomorrow, the international relief organization’s 767 cargo plane will airlift more than 40 tons of critical supplies to the hard-hit islands, including water filtration systems, shelter material, solar lights. The cargo plane will depart at 2am from Greensboro, North Carolina, ensuring these supplies reach hurting families as quickly as possible.

“Typhoon Sinlaku left thousands of people in desperate need of emergency relief—many are without water and power, and it’s going to be this way for weeks to come.” said Franklin Graham, president of Samaritan’s Purse. “That’s why Samaritan’s Purse is airlifting supplies and coming alongside the people of these remote islands in their time of need. We want the families in Saipan and Tinian to know they are not alone. God loves them, and they can turn to Him in their time of need.”

MEDIA OPPORTUNITIES:

• Interview Edward Graham, Chief Operating Officer of Samaritan’s Purse
• Interview Derek Thomson, Response Manager in Boone, North Carolina coordinating relief efforts
• Broadcast-quality b-roll and high-res photos available upon request

MEDIA REQUEST FORM

In 2018, Samaritan’s Purse responded to Saipan and Tinian after Typhoon Yutu, helping more than 7,600 families recover from the deadly storm. The N.C.-based organization distributed shelter material, solar lights, generators, water filtration systems and other emergency supplies. More than 80 tons of relief supplies were airlifted to Saipan over the course of three DC-8 flights.

ABOUT SAMARITAN’S PURSE

Based in Boone, North Carolina, Samaritan’s Purse is an international Christian relief organization that responds to the physical and spiritual needs of individuals in the aftermath of disasters and crisis situations— both in the U.S. and around the world. Led by President and CEO Franklin Graham, Samaritan’s Purse works in more than 100 countries to provide aid to victims of war, disaster, disease, poverty, famine, and persecution. For more information, visit SamaritansPurse.org.

View original content to download multimedia:https://www.prnewswire.com/news-releases/samaritans-purse-airlifts-emergency-relief-supplies-to-typhoon-devastated-pacific-islands-302746290.html

SOURCE Samaritan’s Purse

BOONE, N.C., April 17, 2026 /PRNewswire/ — On Tuesday, Typhoon Sinlaku, the strongest tropical cyclone this year, devastated the Northern Mariana Islands. Saipan and Tinian were hardest hit. The powerful storm ripped roofs off houses and caused severe flooding with some hard-hit areas estimated to be without power and water for weeks to come. Samaritan’s Purse immediately began coordinating with partners on the ground to deliver emergency relief supplies and respond in Jesus’ Name.

Tomorrow, the international relief organization’s 767 cargo plane will airlift more than 40 tons of critical supplies to the hard-hit islands, including water filtration systems, shelter material, solar lights. The cargo plane will depart at 2am from Greensboro, North Carolina, ensuring these supplies reach hurting families as quickly as possible.

“Typhoon Sinlaku left thousands of people in desperate need of emergency relief—many are without water and power, and it’s going to be this way for weeks to come.” said Franklin Graham, president of Samaritan’s Purse. “That’s why Samaritan’s Purse is airlifting supplies and coming alongside the people of these remote islands in their time of need. We want the families in Saipan and Tinian to know they are not alone. God loves them, and they can turn to Him in their time of need.”

MEDIA OPPORTUNITIES:

• Interview Edward Graham, Chief Operating Officer of Samaritan’s Purse
• Interview Derek Thomson, Response Manager in Boone, North Carolina coordinating relief efforts
• Broadcast-quality b-roll and high-res photos available upon request

MEDIA REQUEST FORM

In 2018, Samaritan’s Purse responded to Saipan and Tinian after Typhoon Yutu, helping more than 7,600 families recover from the deadly storm. The N.C.-based organization distributed shelter material, solar lights, generators, water filtration systems and other emergency supplies. More than 80 tons of relief supplies were airlifted to Saipan over the course of three DC-8 flights.

ABOUT SAMARITAN’S PURSE

Based in Boone, North Carolina, Samaritan’s Purse is an international Christian relief organization that responds to the physical and spiritual needs of individuals in the aftermath of disasters and crisis situations— both in the U.S. and around the world. Led by President and CEO Franklin Graham, Samaritan’s Purse works in more than 100 countries to provide aid to victims of war, disaster, disease, poverty, famine, and persecution. For more information, visit SamaritansPurse.org.

View original content to download multimedia:https://www.prnewswire.com/news-releases/samaritans-purse-airlifts-emergency-relief-supplies-to-typhoon-devastated-pacific-islands-302746290.html

SOURCE Samaritan’s Purse

BOONE, N.C., April 17, 2026 /PRNewswire/ — On Tuesday, Typhoon Sinlaku, the strongest tropical cyclone this year, devastated the Northern Mariana Islands. Saipan and Tinian were hardest hit. The powerful storm ripped roofs off houses and caused severe flooding with some hard-hit areas estimated to be without power and water for weeks to come. Samaritan’s Purse immediately began coordinating with partners on the ground to deliver emergency relief supplies and respond in Jesus’ Name.

Tomorrow, the international relief organization’s 767 cargo plane will airlift more than 40 tons of critical supplies to the hard-hit islands, including water filtration systems, shelter material, solar lights. The cargo plane will depart at 2am from Greensboro, North Carolina, ensuring these supplies reach hurting families as quickly as possible.

“Typhoon Sinlaku left thousands of people in desperate need of emergency relief—many are without water and power, and it’s going to be this way for weeks to come.” said Franklin Graham, president of Samaritan’s Purse. “That’s why Samaritan’s Purse is airlifting supplies and coming alongside the people of these remote islands in their time of need. We want the families in Saipan and Tinian to know they are not alone. God loves them, and they can turn to Him in their time of need.”

MEDIA OPPORTUNITIES:

• Interview Edward Graham, Chief Operating Officer of Samaritan’s Purse
• Interview Derek Thomson, Response Manager in Boone, North Carolina coordinating relief efforts
• Broadcast-quality b-roll and high-res photos available upon request

MEDIA REQUEST FORM

In 2018, Samaritan’s Purse responded to Saipan and Tinian after Typhoon Yutu, helping more than 7,600 families recover from the deadly storm. The N.C.-based organization distributed shelter material, solar lights, generators, water filtration systems and other emergency supplies. More than 80 tons of relief supplies were airlifted to Saipan over the course of three DC-8 flights.

ABOUT SAMARITAN’S PURSE

Based in Boone, North Carolina, Samaritan’s Purse is an international Christian relief organization that responds to the physical and spiritual needs of individuals in the aftermath of disasters and crisis situations— both in the U.S. and around the world. Led by President and CEO Franklin Graham, Samaritan’s Purse works in more than 100 countries to provide aid to victims of war, disaster, disease, poverty, famine, and persecution. For more information, visit SamaritansPurse.org.

View original content to download multimedia:https://www.prnewswire.com/news-releases/samaritans-purse-airlifts-emergency-relief-supplies-to-typhoon-devastated-pacific-islands-302746290.html

SOURCE Samaritan’s Purse

BOONE, N.C., April 17, 2026 /PRNewswire/ — On Tuesday, Typhoon Sinlaku, the strongest tropical cyclone this year, devastated the Northern Mariana Islands. Saipan and Tinian were hardest hit. The powerful storm ripped roofs off houses and caused severe flooding with some hard-hit areas estimated to be without power and water for weeks to come. Samaritan’s Purse immediately began coordinating with partners on the ground to deliver emergency relief supplies and respond in Jesus’ Name.

Tomorrow, the international relief organization’s 767 cargo plane will airlift more than 40 tons of critical supplies to the hard-hit islands, including water filtration systems, shelter material, solar lights. The cargo plane will depart at 2am from Greensboro, North Carolina, ensuring these supplies reach hurting families as quickly as possible.

“Typhoon Sinlaku left thousands of people in desperate need of emergency relief—many are without water and power, and it’s going to be this way for weeks to come.” said Franklin Graham, president of Samaritan’s Purse. “That’s why Samaritan’s Purse is airlifting supplies and coming alongside the people of these remote islands in their time of need. We want the families in Saipan and Tinian to know they are not alone. God loves them, and they can turn to Him in their time of need.”

MEDIA OPPORTUNITIES:

• Interview Edward Graham, Chief Operating Officer of Samaritan’s Purse
• Interview Derek Thomson, Response Manager in Boone, North Carolina coordinating relief efforts
• Broadcast-quality b-roll and high-res photos available upon request

MEDIA REQUEST FORM

In 2018, Samaritan’s Purse responded to Saipan and Tinian after Typhoon Yutu, helping more than 7,600 families recover from the deadly storm. The N.C.-based organization distributed shelter material, solar lights, generators, water filtration systems and other emergency supplies. More than 80 tons of relief supplies were airlifted to Saipan over the course of three DC-8 flights.

ABOUT SAMARITAN’S PURSE

Based in Boone, North Carolina, Samaritan’s Purse is an international Christian relief organization that responds to the physical and spiritual needs of individuals in the aftermath of disasters and crisis situations— both in the U.S. and around the world. Led by President and CEO Franklin Graham, Samaritan’s Purse works in more than 100 countries to provide aid to victims of war, disaster, disease, poverty, famine, and persecution. For more information, visit SamaritansPurse.org.

View original content to download multimedia:https://www.prnewswire.com/news-releases/samaritans-purse-airlifts-emergency-relief-supplies-to-typhoon-devastated-pacific-islands-302746290.html

SOURCE Samaritan’s Purse

SAN FRANCISCO, April 17, 2026 /PRNewswire/ — SF Climate Week, hosted by Climatebase, officially kicks off Saturday, April 18 and runs through April 26, bringing together tens of thousands of climate leaders, innovators, policymakers, investors, founders, students, and community members from across the Bay Area and beyond.

This year’s SF Climate Week is already expected to welcome more than 60,000 attendees across over 650 events throughout the Bay Area, making it one of the largest climate gatherings in the world. Organizers expect attendance to continue growing throughout the week, with participation potentially surpassing 70,000 attendees as additional events and registrations are added.

Now in its latest and largest edition, SF Climate Week has grown dramatically from previous years and is on track to approach nearly three times the size of the event just a few years ago.

“SF Climate Week has become one of the most powerful examples of what happens when an entire region comes together around climate,” said Jesse Hynes, Co-Founder and COO of Climatebase. “This year, we’re bringing together more than 650 events and over 60,000 attendees — and we believe we could ultimately approach 70,000 participants by the end of the week. We are incredibly excited to see the Bay Area come together around climate action, and we’re especially proud that SF Climate Week is now approaching nearly three times the size it was just a few years ago.”

The week’s programming features more than 1,000 speakers appearing across hundreds of events. Featured speakers include:

• Al Gore, former U.S. Vice President
   
• Jennifer Granholm, former U.S. Secretary of Energy
   
• Daniel Lurie, Mayor of San Francisco
   
• John Doerr, Chairman of Kleiner Perkins
   
• Tom Steyer, California governor candidate
   
• Alex Honnold, professional rock climber and environmental advocate
   
• Katharine Wilkinson, climate researcher and bestselling author
   
• Scott Wiener, California State Senator
   
• David Hochschild, Chair of the California Energy Commission
   
• Jigar Shah, Former Director, DOE Loan Programs Office
   
• Katie Porter, former U.S. Representative, California Governor Candidate

Hundreds of additional leaders from business, government, science, technology, media, philanthropy, and civil society will also participate throughout the week.

SF Climate Week is an open, decentralized climate gathering featuring events hosted by hundreds of independent organizations across the Bay Area. Programming spans clean energy, climate technology, transportation, food systems, finance, policy, adaptation, biodiversity, entrepreneurship, and more.

About Climatebase:

Climatebase is the platform helping accelerate climate careers and climate solutions. Best known for its leading climate jobs platform, Climatebase also operates the Climatebase Fellowship, one of the world’s largest climate career accelerator programs, and hosts SF Climate Week, one of the largest climate events in the world. Climatebase is also the organizer of the Climate Week Network, a growing global network that brings together Climate Weeks from around the world to share resources, best practices, technology, and support. Climatebase’s mission is to mobilize talent, capital, and ideas to solve climate change.

For media outreach, contact:

Jesse Hynes
jesse@climatebase.org

View original content:https://www.prnewswire.com/news-releases/sf-climate-week-2026-kicks-off-april-18-with-more-than-60-000-attendees-650-events-and-over-1-000-speakers-including-al-gore-sf-mayor-daniel-lurie-and-alex-honnold-302746234.html

SOURCE Climatebase