Tag: GlobeNewswire

HONG KONG, Oct. 06, 2026 (GLOBE NEWSWIRE) — Global Engine Group Holding Limited (NASDAQ: GLE) (the “Company” or “GLE”), a Hong Kong-headquartered integrated solutions provider in information communication technologies (“ICT”), today announced that the Company will effectuate a 1-for-10 share consolidation of the Company’s ordinary shares of US$0.0000625 par value each (the “Share Consolidation”).

Beginning with the opening of trading on October 8, 2026, the Company’s Class A ordinary shares will begin trading on a post-Share Consolidation basis on the Nasdaq Capital Market under the same symbol “GLE”, but under a new CUSIP number of G39711117. The objective of the Share Consolidation is to enable the Company to regain compliance with Nasdaq Marketplace Rule 5550(a)(2) and maintain its listing on the Nasdaq Capital Market.

Upon the effectiveness of the Share Consolidation, every ten (10) Class A ordinary shares with a par value of US$0.0000625 each will be consolidated into one (1) Class A ordinary share with a par value of US$0.000625 each, and every ten (10) Class B ordinary shares with a par value of US$0.0000625 each will be consolidated into one (1) Class B ordinary share with a par value of US$0.000625 each. No fractional shares will be issued as a result of the Share Consolidation. Instead, any fractional shares that would have resulted from the Share Consolidation will be rounded up to the next whole number. Immediately prior to the Share Consolidation, the Company has a total of 16,060,000 Class A ordinary shares and 4,640,000 Class B ordinary shares issued and outstanding, respectively. As a result of the Share Consolidation, the Company will have approximately 1,606,000 Class A ordinary shares and 464,000 Class B ordinary shares issued and outstanding, respectively, subject to the rounding up of any fractional shares. The Share Consolidation affects all shareholders uniformly and will not alter any shareholder’s percentage interest in the Company’s outstanding ordinary shares, except for adjustments that may result from the treatment of fractional shares. The Share Consolidation was approved by the Company’s board of directors on August 5, 2026. The Company has elected to follow home country practice in lieu of the shareholder approval requirements of Nasdaq Marketplace Rule 5635 in connection with the Share Consolidation. Accordingly, no shareholder approval of the Share Consolidation was required.

About Global Engine Group Holding Limited

Global Engine Group Holding Limited is an integrated solutions provider that operates via wholly-owned subsidiaries incorporated in Hong Kong to deliver (i) ICT solution services which include the cloud platform deployment, IT system design and configuration, maintenance, data center colocation and cloud services; (ii) technical services which include the technical development, support, and outsourcing services for data center and cloud computing infrastructure, mobility and fixed network communications, as well as internet-of-things (“IoT”) projects; and (iii) project management services which enhances productivity and collaboration management and enables successful implementations and adoption of solutions for customers, to drive business outcomes and innovation for its customers. GLE’s target customer groups include: (i) small to medium-sized telecom operators and ICT service providers seeking expansion in Hong Kong and the South East Asian market; (ii) data center and cloud computing services providers; and (iii) IoT solutions providers. For more information, please visit: www.globalengine.com.hk; ir.globalengine.com.hk.

Forward-Looking Statements

This press release contains forward-looking statements. Forward-looking statements include statements concerning plans, objectives, goals, strategies, future events or performance, and underlying assumptions and other statements that are other than statements of historical facts. When the Company uses words such as “may, “will, “intend,” “should,” “believe,” “expect,” “anticipate,” “project,” “estimate” or similar expressions that do not relate solely to historical matters, it is making forward-looking statements. Forward-looking statements are not guarantees of future performance and involve risks and uncertainties that may cause actual results to differ materially from the Company’s expectations discussed in the forward-looking statements. These forward-looking statements are subject to uncertainties and risks including, but not limited to, the uncertainties related to market conditions and other risk factors discussed in the reports of the Company filed with the SEC. For these reasons, among others, investors are cautioned not to place undue reliance upon any forward-looking statements in this press release. Additional factors are discussed in the Company’s filings with the SEC, which are available for review at www.sec.gov. The Company undertakes no obligation to publicly revise these forward-looking statements to reflect events or circumstances that arise after the date hereof.

For more information, please contact:

Investor Relations
Email: ir@globalengine.com.hk
Phone: +852 3955 2300

MEXICO CITY, Oct. 06, 2026 (GLOBE NEWSWIRE) — Controladora Vuela Compañía de Aviación, S.A.B. de C.V. (NYSE: VLRS and BMV: VOLAR) (“Volaris” or “the Company”), the ultra-low-cost carrier (ULCC) serving Mexico, the United States, Central and South America, reports its September 2026 preliminary traffic results.

In September, Volaris’ ASM capacity increased 1.9%, while RPMs for the month grew 3.1%. Mexican domestic RPMs decreased by 3.8%, while international RPMs increased 14.2%. Consolidated load factor increased 1.0 percentage points year-over-year to 84.4%. During the month, Volaris transported 2.5 million passengers.

For the third quarter, Volaris’ ASM capacity increased 11.1%, with Mexican domestic capacity increasing 11.0% and international capacity increasing 11.2%. Consolidated load factor increased by 1.3 percentage points to 85.7%.

Enrique Beltranena, Volaris’ President and CEO, said: “September marked the end of a third quarter in which we executed diligently against our plan. As anticipated, we meaningfully moderated capacity growth during the month, down 22% from the summer high season. Our disciplined approach supported both load factors and unit revenues in an elevated fuel environment, with both markets performing at the upper end of their historical ranges for the month.”

	September 2026		September 2025		Variance		YTD September 2026		YTD September 2025		Variance
RPMs (million, scheduled & charter)
Domestic	1,366		1,420		(3.8%)		14,097		13,853		1.8%
International	1,010		884		14.2%		9,813		8,581		14.4%
Total	2,375		2,304		3.1%		23,910		22,434		6.6%
ASMs (million, scheduled & charter)
Domestic	1,548		1,599		(3.2%)		15,910		15,621		1.9%
International	1,266		1,163		8.8%		12,160		11,069		9.9%
Total	2,814		2,762		1.9%		28,071		26,689		5.2%
Load Factor (%, RPMs/ASMs)
Domestic	88.2%		88.8%		(0.6) pp		88.6%		88.7%		(0.1) pp
International	79.8%		76.0%		3.8 pp		80.7%		77.5%		3.2 pp
Total	84.4%		83.4%		1.0 pp		85.2%		84.1%		1.1 pp
Passengers (thousand, scheduled & charter)
Domestic	1,786		1,762		1.4%		18,071		16,889		7.0%
International	689		614		12.2%		6,720		5,916		13.6%
Total	2,475		2,376		4.2%		24,791		22,804		8.7%

^{The information included in this report has not been audited and does not provide information on the Company’s future performance. Volaris’ future performance depends on several factors. It cannot be inferred that any period performance or its year-over-year comparison will indicate a similar performance in the future. Figures are rounded for convenience purposes.}

Glossary

Revenue passenger miles (RPMs): Number of seats booked by passengers multiplied by the number of miles flown.

Available seat miles (ASMs): Number of seats available for passengers multiplied by the number of miles flown.

Load factor: RPMs divided by ASMs and expressed as a percentage.

Passengers: The total number of passengers booked on all flight segments.

Investor Relations Contact
Liliana Juárez / ir@volaris.com

Media Contact
Ricardo Flores / rflores@gcya.net

About Volaris
*Controladora Vuela Compañía de Aviación, S.A.B. de C.V. (“Volaris” or “the Company”) (NYSE: VLRS and BMV: VOLAR) is an ultra-low-cost carrier, with point-to-point operations, serving Mexico, the United States, Central, and South America. Volaris offers low base fares to build its market, providing quality service and extensive customer choice. Since the beginning of operations in March 2006, Volaris has increased its routes from 5 to more than 246 and its fleet from 4 to 154 aircraft. Volaris offers around 500 daily flight segments on routes that connect 46 cities in Mexico and 34 cities in the United States, Central, and South America, with one of the youngest fleets in Mexico. Volaris targets passengers who are visiting friends and relatives, cost-conscious business and leisure travelers in Mexico, the United States, Central, and South America. For more information, please visit ir.volaris.com. Volaris routinely posts information that may be important to investors on its investor relations website. The Company encourages investors and potential investors to consult the Volaris website regularly for important information about Volaris.

NEW CANAAN, Conn., Oct. 06, 2026 (GLOBE NEWSWIRE) — NewLake Capital Partners, Inc. (OTCQX: NLCP) (the “Company” or “NewLake”), a leading provider of real estate capital to state-licensed cannabis operators, today announced that management will participate in the following October 2026 investor conferences.

Maxim Growth Summit 2026
Dates: October 13-14, 2026
Location: Hard Rock Hotel, New York, NY

LD Micro 20th Annual Main Event
Dates: October 19-21, 2026
Location: Luxe Sunset Blvd Hotel, Los Angeles, CA
Presentation Day and Time: Wednesday, October 21 at 10:30 a.m. PT
Presentation Location: Track 2
Webcast: https://ir.newlake.com/news-events/ir-calendar

Blank Rome 10th Annual State of the Cannabis Industry Conference
Date: October 26, 2026
Location: Omni Boston Hotel at the Seaport, Boston, MA

Planet MicroCap Toronto 2026
Dates: October 27-29, 2026
Location: Arcadian Court & Loft, Toronto, ON
Presentation Day and Time: Wednesday, October 28 at 3:00 p.m. ET
Presentation Location: Arcadian Loft #1
Webcast: https://ir.newlake.com/news-events/ir-calendar

To schedule a one-on-one meeting with NewLake’s management team, please email KCSA Strategic Communications at NewLake@KCSA.com.

About NewLake Capital Partners, Inc.
NewLake Capital Partners, Inc. is an internally-managed real estate investment trust that provides real estate capital to state-licensed cannabis operators through sale-leaseback transactions and third-party purchases and funding for build-to-suit projects. NewLake owns a portfolio of 35 properties, including 15 cultivation facilities and 20 dispensaries, primarily leased to single tenants under triple-net lease agreements. For more information, please visit www.newlake.com.

Contact Information:
Lisa Meyer
Chief Financial Officer, Treasurer and Secretary
NewLake Capital Partners, Inc.
lmeyer@newlake.com

Investor Contact:
Valter Pinto, Managing Director
KCSA Strategic Communications
NewLake@KCSA.com
PH: (212) 896-1254

Media Contact:
Ellen Mellody
KCSA Strategic Communications
EMellody@KCSA.com
PH: (570) 209-2947

Microsoft and former AWS executive brings decades of product engineering, cloud security and infrastructure expertise to accelerate Tenable’s AI-powered exposure management leadership

COLUMBIA, Md., Oct. 06, 2026 (GLOBE NEWSWIRE) — Tenable^® Holdings, Inc. (NASDAQ: TENB), the exposure management company, today announced the appointment of Charlie Bell to its Board of Directors. A seasoned technology executive with nearly four decades of hands-on software engineering and operational leadership, Bell brings deep expertise in building and scaling complex cloud systems to Tenable’s board as the company continues to advance its AI-powered exposure management platform.

Bell’s appointment comes at a crucial inflection point for the enterprise cybersecurity industry. As organizations navigate the convergence of AI integration, cloud infrastructure and an accelerating volume of software vulnerabilities, Bell’s engineering-first perspective and extensive background in cloud-scale product architecture will reinforce Tenable’s strategic direction.

“Charlie Bell is one of the foundational architects of modern cloud computing and enterprise security,” said Mark Thurmond, Co-CEO of Tenable. “His track record of engineering resilient, large-scale software platforms and leading world-class product teams is phenomenal for our business.”

“Charlie brings deep experience leading organizations through major technology shifts, from the rise of cloud computing at massive scale to the security transformations that followed. He’ll bring that same judgment to Tenable as we lead the security market into this next era of AI-driven exposure management and proactive risk reduction,” said Steve Vintz, Co-CEO of Tenable.

Bell spent over two decades at Amazon Web Services (AWS), playing a central role in building its cloud infrastructure from its inception into a global, multi-billion dollar business. As a Senior Vice President at AWS, he led core engineering, utility computing and operational teams responsible for scaling cloud platforms used by millions of enterprises worldwide. Most recently, Bell served as Executive Vice President of Security, Compliance, Identity and Management at Microsoft, where he oversaw the company’s enterprise security strategy, product engineering and threat intelligence operations.

“Tenable has established itself as the pioneer in exposure management, helping organizations focus on the risks that actually matter before they’re exploited,” said Bell. “Throughout my career, I’ve been driven by a conviction that great engineering is the foundation of effective security. Tenable’s vision, backed by its massive data lake and advanced exposure intelligence, positions it uniquely to address the complexities of today’s AI attack surface. I look forward to working alongside the executive leadership team and the board to help guide the company’s next phase of engineering-driven growth.”

With Bell’s appointment, Tenable strengthens its board’s technical depth, ensuring the company remains positioned to help global organizations reduce risk across AI, cloud, identity, OT and traditional IT environments.

About Tenable
Tenable^® is the exposure management company, exposing and closing the cybersecurity gaps that erode business value, reputation and trust. The company’s AI-powered exposure management platform radically unifies security visibility, insight and action across the attack surface, equipping modern organizations to protect against attacks from IT infrastructure to cloud environments to critical infrastructure and everywhere in between. By protecting enterprises from security exposure, Tenable reduces business risk for over 40,000 customers around the globe. Learn more at tenable.com.

Media Contact:
Tenable PR
tenablepr@tenable.com

Forward-Looking Statements
This press release contains “forward-looking” statements, as that term is defined under the federal securities laws, including statements regarding the impact of the appointment of Charlie Bell to Tenable’s Board of Directors, anticipated strategic benefits and contributions to Tenable’s product development, platform engineering and AI-powered exposure management leadership, and future growth. Forward-looking statements are subject to a number of risks and uncertainties, many of which involve factors or circumstances that are beyond Tenable’s control. Tenable’s actual results could differ materially from those stated or implied in forward-looking statements due to a number of factors, including risks and uncertainties related to the development, integration and performance of advanced AI technologies, market acceptance of Tenable’s exposure management platform, and other risks detailed in Tenable’s Form 10-K filed with the Securities and Exchange Commission (“SEC”) for the year ended December 31, 2025, in Tenable’s quarterly reports on Form 10-Q for the quarters ended March 31, 2026 and June 30, 2026 and in other filings and reports that Tenable may file from time to time with the SEC. The forward-looking statements included in this press release represent Tenable’s views as of the date of this press release. Tenable anticipates that subsequent events and developments will cause Tenable’s views to change. Tenable undertakes no intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. These forward-looking statements should not be relied upon as representing Tenable’s views as of any date subsequent to the date of this press release.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/55656433-2430-4ed9-9bc9-f409ee671bdc

Government-funded initiative advances commercially sourced third-party IP security assurance for semiconductor systems used in mission-critical aerospace and defense systems

CAMPBELL, Calif., Oct. 06, 2026 (GLOBE NEWSWIRE) — Arteris, Inc. (Nasdaq: AIP), a leading provider of semiconductor technology for accelerating innovation in the AI era, today announced the expansion of its third-party IP (3PIP) security assurance program in collaboration with BAE Systems and SiFive, Inc. This program has received an additional $3.3 million in funding through the Trusted and Assured Microelectronics (T&AM) program within the Office of the Under Secretary of War for Research and Engineering (OUSW(R&E)).

The T&AM Program drives modernization of defense systems through access to advanced microelectronics. To support aspects of this program, this initiative brings together Arteris, BAE Systems, and SiFive to advance third-party IP security assurance methodologies for mission-critical semiconductor systems. The focus is on helping to address the growing challenge of ensuring the security and trustworthiness of commercially sourced third-party silicon IP integrated into advanced systems-on-chip (SoCs).

The expanded program builds on prior successful collaboration among the government and companies and will further enhance secure integration methodologies for third-party IP components operating within complex semiconductor systems. The collaboration also supports broader industry and government efforts to strengthen semiconductor design supply chain security. The collaboration between Arteris, BAE Systems, and SiFive is focused on establishing a repeatable, evidence-based methodology to evaluate and verify the secure implementation, integration, and usage of third-party IP integrated into SoC environments.

“Third-party commercial IP is essential to developing today’s advanced semiconductor systems and maintaining the speed and innovation required for the next-generation capabilities central to BAE Systems’ mission portfolio,” said Joseph Lin, chief scientist at BAE Systems FAST Labs™. “The third-party IP security assurance program is pivotal in establishing practical, repeatable and measurable security assurance processes as a foundation for the timely delivery of robust and dependable mission-critical weapon systems.”

“Security is a paramount priority for our RISC-V processor IP solutions, especially as RISC-V adoption accelerates across markets ranging from AI infrastructure to aerospace and defense,” said John Ronco, svp of product at SiFive. “This collaboration demonstrates how the ecosystem can work together to strengthen trust in third-party IP integration and deliver practical, scalable hardware security assurance methodologies for modern semiconductor designs.”

“As semiconductor supply chains become increasingly complex, third-party IP security assurance has become a critical requirement for both commercial and government applications, particularly in aerospace and defense systems, data center infrastructure, automotive platforms, and intelligent edge devices including drones and robotics,” said K. Charles Janac, president and CEO of Arteris. “By collaborating with the US Government, SiFive, and BAE Systems, we are helping establish a repeatable framework for third-party IP security assurance that enables semiconductor developers to better understand, evaluate, and mitigate hardware security risks in increasingly complex semiconductor designs.”

Arteris employs a Common Weakness Enumeration (CWE)-based microelectronics evidence framework that links hardware weaknesses to requirements, properties, and traceable verification evidence at a granular level. The hardware security assurance technologies from Arteris is used for coverage-oriented security evidence collection and repeatable hardware security assurance throughout the design process, from IP blocks to subsystems, chiplets, and integrated SoCs running software workloads. Learn more at arteris.com/cybersecurity.

About Arteris
Arteris is a leading provider of semiconductor technology that accelerates the creation of high-performance, power-efficient silicon with built-in safety, reliability, and security. Innovative Arteris products are designed to optimize data movement and help ease complexity in the modern AI era with network-on-chip (NoC) interconnect intellectual property (IP), system-on-chip (SoC) software for integration automation and hardware security assurance. All are used by the world’s top technology companies to improve overall performance and engineering productivity, reduce risk, lower costs, and bring cutting-edge designs to market faster. Learn more at arteris.com.

About SiFive
As the pioneers who introduced RISC-V to the world, SiFive is transforming the future of computing by bringing the limitless potential of RISC-V to the highest performance and most data-intensive applications in the world. SiFive’s RISC-V compute platforms have enabled leading technology companies around the world to innovate, optimize and deliver the most advanced solutions of tomorrow across every market segment of chip design, including artificial intelligence, machine learning, automotive, data center, mobile, and consumer. With SiFive, the future of RISC-V has no limits.

About BAE Systems
BAE Systems, Inc. and our nearly 41,500 people are part of a global defense, aerospace, and security company with more than 110,000 employees worldwide. We design, build and deliver a full range of products and services for air, land, sea, space and cyberspace, as well as advanced electronics, intelligence, security, information technology solutions and support services. Our dedication shows in everything we do for our customers. Guided by a performance-driven culture of innovation and collaboration, our ambitious teams push the limits of possibility to protect those who protect us.

About the Trusted and Assured Microelectronics (T&AM) Program
The Trusted and Assured Microelectronics (T&AM) Program drives modernization of defense systems through access to advanced microelectronics technologies that leverage state-of-the-art, commercially driven capabilities. The program operates under the Office of the Under Secretary of War for Research and Engineering (OUSW(R&E)).

© 2004-2026 Arteris, Inc. All rights reserved worldwide. Arteris, Arteris IP, the Arteris IP logo, and the other Arteris marks found at https://www.arteris.com/trademarks are trademarks or registered trademarks of Arteris, Inc. or its subsidiaries. All other trademarks are the property of their respective owners.

Media Contact:
Arteris Inc.
Gina Jacobs
+1 408 560 3044
newsroom@arteris.com

This press release was published by a CLEAR® Verified individual.

MIAMI, Oct. 06, 2026 (GLOBE NEWSWIRE) — AerSale Corporation (NASDAQ: ASLE), a leading global supplier of aftermarket commercial aircraft, engines, and proprietary engineered solutions, today announced that it has leased a Boeing 757-200PCF aircraft to Mister Air Transport S.R.L., a Romanian-based cargo carrier that will manage the freighter operations for significant shareholder AerCommerce. The aircraft is expected to enter revenue service in October 2026.

The 757-200PCF freighter marks the launch of Mister Air’s own flight operations, flying under its certificate and crews rather than chartering capacity from other carriers. It is among the first units the carrier plans to introduce as it builds a dedicated medium-haul freighter fleet. Operating under a Romanian Air Operator Certificate (AOC) and based at Lódź Władysław Reymont Airport (LCJ), Mister Air will deploy the aircraft on behalf of AerCommerce’s established cargo customer base.

Mister Air’s strategy targets the “middle-mile” markets, connecting major production and e-commerce gateways with airports across Central and Eastern Europe, alongside parcel programs and worldwide special missions. The Boeing 757-200PCF freighter’s combination of long range, payload capacity, and operational reliability is well suited to these routes, allowing frequent, right-sized service where larger widebodies are uneconomic. The carrier intends to grow its freighter fleet over the coming years to meet contracted and anticipated demand.

“We are proud to support Mister Air as it launches its own freighter operations with this Boeing 757-200PCF,” said Craig Wright, AerSale’s Senior Vice President & Head of Asset Management. “The 757 remains one of the most capable and sought-after platforms in its segment, and this transaction reflects both the strength of that asset class and AerSale’s ability to deliver flight-ready aircraft to operators pursuing ambitious growth. We look forward to supporting Mister Air’s fleet as it expands.”

“This Boeing 757-200PCF marks an important milestone in Mister Air’s growth and the launch of our own flight operations,” said Ireneusz Dylczyk, Chief Executive Officer of Mister Air. “The 757’s range and payload make it the ideal aircraft for our customers. AerSale proved to be a professional and responsive partner throughout the process. This aircraft lays the foundation for the additional freighters we intend to introduce as we scale our network.”

The transaction extends AerSale’s leasing presence in the European cargo market and underscores the company’s ability to deliver leased flight equipment to operators worldwide.

About AerSale

AerSale serves airlines operating large jets manufactured by Boeing, Airbus and McDonnell Douglas and is dedicated to providing integrated aftermarket services and products designed to help aircraft owners and operators realize significant savings in the operation, maintenance and monetization of their aircraft, engines, and components. AerSale’s offerings include Aircraft & Component MRO, Aircraft and Engine Sales and Leasing, Used Serviceable Material sales, and internally developed ‘Engineered Solutions’ to enhance aircraft performance and operating economics (e.g. AerSafe®, AerTrak®, and AerAware™ Enhanced Flight Vision System).

About Mister Air

Mister Air is a Romanian-based cargo charter airline operating under a Romanian AOC, with operations managed by AerCommerce. The carrier provides scheduled and ad-hoc freighter services focused on express e-commerce and parcel cargo between Asia, Middle East and Central & Eastern Europe, as well as worldwide special missions, from their base location at Lódź (LCJ).

About AerCommerce

AerCommerce is a Poland-based aviation company headquartered in Lodz, with its main operations office in Lublin and personnel across multiple international locations. With over two decades of industry experience and the backing of US-based strategic investor Global Aviation Solutions, AerCommerce provides cargo charter and brokerage services and manages the operations of Mister Air.

Media:
For more information about AerSale, please visit our website: www.AerSale.com.
Follow us on: LinkedIn | Twitter | Facebook | Instagram

AerSale: Jackie Carlon
Telephone: (305) 764-3200

Email: media.relations@aersale.com

Investor:
AerSale: InvestorRelations@aersale.com
Source: AerSale Corporation

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/2c1f342a-71df-4ab4-b546-aed1fad3c0c7

New marketplace lets teams browse, size, and allocate capacity credits across managed AI agents from a single console

SANTA CLARA, Calif., Oct. 06, 2026 (GLOBE NEWSWIRE) — Netskope (NASDAQ: NTSK), a leader in modern security and networking for the cloud and AI era, today announced the AgentSkope Marketplace, which gives security and network teams a single console to browse, deploy, and manage AgentSkope AI agents. The Marketplace replaces per-agent procurement with one catalog, one pool of capacity credits, and one view of consumption, so teams can rapidly scale agentic operations without restrictive administrative overheads for every new agent they seek to deploy, and with capacity based on actual usage insights instead of guesswork.

Already-stretched security and network teams face growing alert and ticket volumes, and many deploy AI agents one product at a time, restarting procurement and justification for every new request to avoid security risks. In a recent survey of security and network operations leaders, 42% said alerts, cases, or tickets went uninvestigated, with 51% naming scattered context and signals as a leading obstacle to faster resolution. Asked what an agent platform must provide, a majority put shared context first, and nearly half want one governance model that covers vendor-built, internally built, and managed-service agents alike¹.

Launched in early 2026, Netskope One AgentSkope was designed for the agentic SOC and the agentic NOC, allowing the teams using the Netskope One platform to deploy managed AI agents that execute end-to-end security and networking workflows within the policies, controls, guardrails, and compliance frameworks they already have in place. Netskope One AgentSkope brings efficiency to daily security and networking workflows, productivity to teams, and the addition of the Marketplace provides agility to quickly adapt as business priorities change. Every agent operates within the policies, controls, and compliance frameworks Netskope customers already have in place, governed through the same Netskope Zero Trust Engine and Netskope One platform they use today.

AgentSkope Marketplace provides the following:

• AgentSkope Marketplace catalog: a single console where teams browse, size, and deploy AgentSkope Agents.
• Credit allocation: controls that distribute one pool of committed capacity credits across agents.
• Credit calculator: estimates how many capacity credits a given level of agent use will require, before any commitment.
• Usage monitoring: a dashboard that shows utilization and capacity credit usage, with alerts and insights to help plan future requirements.

“Until now, teams have typically bought agents one product at a time, with every new request restarting a procurement cycle before it delivers any value,” said John Martin, Chief Product Officer at Netskope. “AgentSkope provides one set of policies, controls, and compliance frameworks, to which Marketplace now adds one catalog, one pool of capacity credits, and one view of consumption, so security and networking teams can deploy the agents they need today and size next year’s investment on real usage data instead of a guess.”

The AgentSkope Marketplace is available today to all Netskope customers with more agents coming to the marketplace soon. Find out more on the blog.

About Netskope
Netskope (NASDAQ: NTSK), a leader in modern security and networking for the cloud and AI era, addresses the needs of both security and networking teams by providing optimized access and real-time, context-based security for the AI ecosystem inclusive of agents, applications, tools, LLMs, people, devices, and data. Thousands of customers, including more than 30% of the Fortune 100, trust the Netskope One platform, its Zero Trust Engine, and its powerful NewEdge network to reduce risk and gain full visibility and control over cloud, AI, SaaS, web, and private applications — providing security and accelerating performance without trade-offs.

Learn more at netskope.com, on LinkedIn, and on Instagram.

Media Relations Contacts:
press@netskope.com

Investor Relations Contacts:
ir@netskope.com

^{____________________________________
1} Source: The State of AI Agents in Security and Network Operations, Cybersecurity Insiders and Netskope, 2026.

BOCA RATON, FL, Oct. 06, 2026 (GLOBE NEWSWIRE) — INmune Bio Inc. (NASDAQ: INMB) (the “Company”), a late-stage biotechnology company focused on inflammation and immunology, is excited to announce its participation in the upcoming 2026 Maxim Growth Summit, taking place from October 12th to 14th at The Hard Rock Hotel NYC. This prestigious event brings together industry leaders, innovators, and premier institutions to explore the latest trends and advancements across several industries.

INmune Bio will be meeting with institutional investors in one-on-one sessions and engaging with senior Maxim research analysts throughout the event. Company CEO David Moss will also be presenting on an Immunology & Inflammation Therapies Panel on Thursday Oct. 14^th at 10:30am.

Keynote speakers include Marcus Lemonis (co-owner of Camping World and executive chairman of Neighborhood Intelligence) and Eric Adams (former mayor of New York City). The conference will also feature roundtable discussions with CEOs from small- and mid-cap companies, moderated by Maxim research analysts. Roundtable discussions will cover a range of sectors, including biotechnology, artificial intelligence, quantum technology, digital assets, energy and mining, drones, and more.

This year, portions of the event will also be streamed online at https://digital.maximgrp.com/.

For more information and a complete agenda of the Maxim Growth Summit, please visit www.maximgrp.com/2026-growth-summit.

About Maxim Group LLC

Maxim Group LLC is a full-service investment banking, securities and wealth management firm headquartered in New York. The independent and employee-owned firm provides a full array of financial services including investment banking; private wealth management; and global institutional equity, fixed-income and derivatives sales & trading, equity research and prime brokerage services. Maxim Group LLC is a registered broker-dealer with the U.S. Securities and Exchange Commission (SEC) and the Municipal Securities Rulemaking Board (MSRB) and is a member of FINRA, SIPC, and NASDAQ. To learn more about Maxim Group LLC, visit maximgrp.com.

About INmune Bio Inc.

INmune Bio Inc. is a publicly traded (NASDAQ: INMB), late-stage biotechnology company focused on developing treatments that target the innate immune system to fight disease. The Company’s clinical-development strategy centers on advanced precision medicine, matching drug mechanisms directly to patient biology to optimize clinical outcomes.

INmune Bio is actively advancing two late-stage product platforms toward registrational milestones:

• CORDStrom™: A proprietary, pooled, allogeneic, human umbilical cord-derived mesenchymal stromal cell platform engineered to address the historical clinical challenges of donor variability and manufacturing inconsistency. Following successful clinical readouts in RDEB, the platform is transitioning to regulatory filing phases, with an MAA planned for the UK MHRA in 2026 and EU EMA in 2027, alongside a planned U.S. Biologics License Application (BLA) submission.

• XPro1595™: A Dominant-Negative Tumor Necrosis Factor (DN-TNF) platform designed to selectively neutralize soluble TNF (sTNF) and reduce neuroinflammation without compromising protective immune function. Backed by recently granted FDA Fast Track designation and successful regulatory alignment from an End-of-Phase 2 meeting, XPro1595™ is positioned for an integrated Phase 2b/3 seamless adaptive registrational program in neuroinflammation-enriched early Alzheimer’s disease. 

To learn more about INmune Bio’s pipeline and its approach to harnessing the innate immune system, please visit www.inmunebio.com.

Forward Looking Statements

The Company’s product candidates remain in clinical development stage and there is no assurance that any specific outcome will be achieved. Any statements contained in this press release related to the development or commercialization of product candidates and other business and financial matters, including without limitation, trial results and data, including  Ebstrocel™, XPro™ and INKmune™ trial results, timing of key milestones, future plans or expectations, and the prospects for receiving regulatory approval or commercializing or selling any product or drug candidates, may constitute forward-looking statements as that term is defined in the Private Securities Litigation Reform Act of 1995. Any forward-looking statements contained herein are based on current expectations but are subject to several risks and uncertainties. Actual results and the timing of certain events and circumstances may differ materially from those described by the forward-looking statements because of these risks and uncertainties. CORDStrom™, XPro1595™ (XPro™, pegipanermin), and INKmune™ have either finished clinical trials, are still in clinical trials or are preparing to start clinical trials and have not been approved by the US Food and Drug Administration (FDA), the UK MHRA or any regulatory body and there cannot be any assurance that they will be approved by the FDA, the UK MHRA or any regulatory body or that any specific results will be achieved. The factors that could cause actual future results to differ materially from current expectations include, but are not limited to, risks and uncertainties relating to the Company’s ability to produce more drug for clinical trials; the availability of substantial additional funding for the Company to continue its operations and to conduct research and development, clinical studies and future product commercialization; and the Company’s business, research, product development, regulatory approval, marketing and distribution plans and strategies. These and other factors are identified and described in more detail in the Company’s filings with the Securities and Exchange Commission, including the Company’s Annual Report on Form 10-K, the Company’s Quarterly Reports on Form 10-Q and the Company’s Current Reports on Form 8-K. The Company assumes no obligation to update any forward-looking statements to reflect any event or circumstance that may arise after the date of this release.

INmune Bio Contacts: 
David Moss 
Chief Executive Officer 
(561) 710-0512 
info@inmunebio.com

Daniel Carlson 
Head of Investor Relations 
(415) 509-4590 
dcarlson@inmunebio.com

Helsinki hotel project expands the reach of LiqTech’s ceramic membrane filtration technology

BALLERUP, Denmark, Oct. 06, 2026 (GLOBE NEWSWIRE) — LiqTech International, Inc. (Nasdaq: LIQT) (“LiqTech”), a clean technology company that manufactures and markets highly specialized filtration technologies, today announced its first commercial Aquatics order in Finland for the swimming pool at Original Sokos Hotel Presidentti in Helsinki. Secured through the Company’s Pool4You partnership, this order extends LiqTech’s commercial pool presence into a new market and advances its strategy of expanding adoption of its proprietary silicon carbide membrane technology.

LiqTech’s QlariFlow™ Aquatics platform combines silicon carbide ceramic membranes with a compact, modular system design to address the water quality and operating requirements of commercial pools. The technology is designed to deliver consistent filtration while helping operators reduce water, energy and chemical consumption compared with conventional filtration approaches. Its space-efficient configuration also supports installation in facilities where plant room space is limited, making it suitable for both new pool projects and upgrades to existing facilities.

These capabilities are central to LiqTech’s Aquatics growth strategy. By bringing its membrane technology and filtration systems to more commercial pool applications, the Company aims to meet demand for reliable water treatment and more efficient facility operation. The Helsinki project, which specifies a 2 × 2 membrane configuration plus AutoCIP, will bring LiqTech’s filtration technology to a commercial pool in Finland and serve as an example for other pool operators considering similar upgrades.

“This first order in Finland reflects our progress in bringing LiqTech’s ceramic membrane technology to more commercial pool markets,” said Fei Chen, CEO of LiqTech. “Our value starts with the technology and the system we deliver. We combine precise filtration with a compact design to help pool operators maintain water quality while using resources more efficiently. The Original Sokos Hotel Presidentti project is another step in expanding the reach of these capabilities, with Pool4You providing the local expertise and customer access to support our growth in Finland.”

The order follows the September 1, 2026 expansion of LiqTech’s Pool4You partnership. With more than four decades of pool water treatment experience, Pool4You provides established local relationships and project support that complement LiqTech’s technology. Its work encompasses over 80% of Finnish public swimming pool water treatment systems.

About LiqTech International Inc.

LiqTech International, Inc., a Nevada corporation, is a high-tech filtration technology company that provides state-of-the-art ceramic silicon carbide filtration technologies for gas and liquid purification. LiqTech’s silicon carbide membranes are designed to be used in the most challenging purification applications, and its silicon carbide filters are used to control diesel exhaust soot emissions. Using nanotechnology, LiqTech develops products using its proprietary silicon carbide technology, resulting in a wide range of component membranes, membrane systems, and filters for both microfiltration and ultrafiltration applications. By incorporating LiqTech’s SiC liquid membrane technology with the Company´s extensive systems design experience and capabilities, LiqTech offers unique, modular designed filtration solutions for the most difficult water purification applications.

For more information, please visit www.liqtech.com 

Follow LiqTech on Linkedln:https://www.linkedin.com/company/liqtech/

Follow LiqTech on Twitter: https://twitter.com/LiqTech

Forward–Looking Statement

This press release contains “forward-looking statements.”  Although the forward-looking statements in this release reflect the good faith judgment of management, forward-looking statements are inherently subject to known and unknown risks and uncertainties that may cause actual results to be materially different from those discussed in these forward-looking statements.  Readers are urged to carefully review and consider the various disclosures made by us in the reports filed with the Securities and Exchange Commission, including the risk factors that attempt to advise interested parties of the risks that may affect our business, financial condition, results of operation, and cash flows.  If one or more of these risks or uncertainties materialize, or if the underlying assumptions prove incorrect, our actual results may vary materially from those expected or projected.  Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this release.

We assume no obligation to update any forward-looking statements to reflect any event or circumstance that may arise after the date of this release.

LiqTech Company Contact                                         
Susan Keegan Elleskov
Head of Marketing
LiqTech International, Inc.
Phone: +45 31315941
www.liqtech.com

LiqTech Investor Contact                                         
Robert Blum
Lytham Partners, LLC                                 
Phone: 602-889-9700
liqt@lythampartners.com

• Collaborations at Applied’s EPIC Center in Silicon Valley and Intel’s R&D campus in Oregon aim to develop breakthroughs in next-generation transistors, interconnects and advanced packaging technologies for AI chips and systems 
• Collaboration builds on the companies’ long history of working together to solve complex semiconductor device scaling challenges

SANTA CLARA, Calif., Oct. 06, 2026 (GLOBE NEWSWIRE) — Applied Materials, Inc. (Nasdaq: AMAT), the leader in materials engineering for the semiconductor industry, today announced it is working with Intel Corporation (Nasdaq: INTC) to accelerate development of chipmaking innovations for next-generation transistors, interconnects and advanced packaging technologies. The collaboration will bring together cutting-edge capabilities from Applied’s EPIC Center in Silicon Valley and Intel’s R&D campus in Hillsboro, Oregon to shorten time-to-market of advanced semiconductor technologies essential to AI computing.

“Applied and Intel share a decades-long history of deep collaboration focused on pushing the boundaries of materials engineering to advance the semiconductor roadmap,” said Gary Dickerson, President and CEO of Applied Materials. “Bringing our teams together at the EPIC Center will deepen that partnership and accelerate the transistor, interconnect and packaging innovations needed to drive the future of AI computing.”

“The demand for AI computing is driving the need for major advances in performance, power efficiency, and packaging. Intel is focused on delivering those innovations and doing it in close collaboration with partners across the ecosystem,” said Lip-Bu Tan, CEO of Intel. “Applied Materials is an important partner, and we look forward to expanding our work together at the EPIC Center to help accelerate the path from the lab to high-volume manufacturing in the United States.”

Teams from Applied Materials and Intel are collaborating on next-generation materials, process technologies and device architectures for advanced logic nodes targeting AI workloads, and will continue this work at the EPIC Center. The collaboration spans both front-end and back-end-of-line advancements, including interconnect scaling. The collaboration also involves development of advanced packaging technologies for Foveros-based 3D stacking, supporting higher interconnect density, improved power delivery, and enhanced thermal performance for high-performance compute platforms designed to accelerate emerging agentic AI workloads.

“With the chipmaking roadmap becoming more complex at each process node, accelerating innovations in semiconductor devices, interconnects and packaging requires deeper collaboration across R&D and manufacturing,” said Dr. Prabu Raja, President of the Semiconductor Products Group at Applied Materials. “We look forward to working closely with Intel as a founding partner of the EPIC Center to shorten development cycles and bring new technologies to market faster.”

“Accelerating our R&D to keep pace with the rapid buildout of AI infrastructure is critical to delivering the technology, manufacturing excellence and foundry services our customers expect from Intel Foundry,” said Naga Chandrasekaran, Executive Vice President, Chief Technology and Operations Officer and General Manager of Intel Foundry. “Applied Materials’ new EPIC Center provides an environment where our teams can collaborate even more closely and at higher velocity to accelerate materials development and process innovations.”

Applied’s new EPIC (Equipment and Process Innovation and Commercialization) Center in Silicon Valley, which is scheduled to be operationally ready this year, is designed from the ground up to dramatically reduce the time it takes to commercialize breakthrough technologies from early-stage research to full-scale manufacturing. For chipmakers, the EPIC Center will provide earlier access to Applied’s R&D portfolio, faster cycles of learning and accelerated transfer of next-generation technologies into high-volume manufacturing, within a secure collaborative environment. In addition, the co-innovation programs at the EPIC Center will provide Applied with greater multi-node visibility to guide R&D investments while increasing R&D productivity and value sharing.

Forward-Looking Statements
This press release contains forward-looking statements, including those regarding Applied’s investment and growth strategies, the development of new materials and technologies, industry outlook and technology requirements, the plans and expectations for the EPIC Center, and other statements that are not historical facts. These statements and their underlying assumptions are subject to risks and uncertainties and are not guarantees of future performance. Factors that could cause actual results to differ materially from those expressed or implied by such statements include, without limitation: the demand for semiconductors and customers’ technology requirements; the ability to develop new and innovative technologies; the ability to obtain and protect intellectual property rights in key technologies; the ability to achieve the objectives of the EPIC Center; and other risks and uncertainties described in Applied’s filings with the Securities and Exchange Commission, including Applied’s most recent Forms 10-K, 10-Q and 8-K. All forward-looking statements are based on management’s current estimates, projections and assumptions, and Applied assumes no obligation to update them.

About Applied Materials
Applied Materials, Inc. (Nasdaq: AMAT) is the leader in materials engineering solutions that are at the foundation of virtually every new semiconductor and advanced display in the world. The technology we create is essential to advancing AI and accelerating the commercialization of next-generation chips. At Applied, we push the boundaries of science and engineering to deliver material innovation that changes the world. Learn more at www.appliedmaterials.com.

Contacts:

Applied Materials
Ricky Gradwohl (editorial/media) 408.235.4676
Mike Sullivan (financial community) 408.986.7977