LAVAL, Québec, Sept. 29, 2026 (GLOBE NEWSWIRE) — Savaria Corporation (“Savaria”) (TSX: SIS) one of the global leaders in the accessibility industry, announces today that Mr. Marcel Bourassa, Executive Chairman of Savaria, has completed the sale of 3,000,000 common shares of Savaria (“Common Shares”) (representing approximately 4.15% of the issued and outstanding Common Shares). The Common Shares were sold through the facilities of the Toronto Stock Exchange (the “TSX”).

Following the sale of Common Shares, Mr. Bourassa will continue to be the largest shareholder of Savaria with an approximately 11.94% equity interest. “After 35 years of leadership at Savaria, I am proud of our accomplishments of building a team that has brought Savaria to the next level,” said Mr. Bourassa. The proceeds from the sale of Common Shares are for personal reasons, for family estate planning purposes and in support of philanthropic endeavors. Mr. Bourassa may, from time to time, increase or decrease his investment in Savaria through market transactions, private arrangements, treasury issuances or otherwise.

On September 29, 2026, Mr. Bourassa completed the sale of 3,000,000 Common Shares beneficially owned by Les Élévateurs Savaria Inc. (representing approximately 4.15% of the issued and outstanding Common Shares) through the TSX, which were sold at a price of $28.35 per share, for an aggregate consideration of $85,050,000 (the “Transaction”).

Immediately prior to the Transaction, Mr. Bourassa: (i) beneficially owned and controlled 232,900 Common Shares (representing approximately 0.32% of the issued and outstanding Common Shares), (ii) controlled 10,585,767 Common Shares beneficially owned by Les Élévateurs Savaria Inc. (representing approximately 14.65% of the issued and outstanding Common Shares), (iii) controlled 225,231 Common Shares beneficially owned by 9302-0071 Québec Inc. (representing approximately 0.31% of the issued and outstanding Common Shares), (iv) controlled 336,500 Common Shares beneficially owned by 9264-4582 Québec Inc. (representing approximately 0.47% of the issued and outstanding Common Shares) and (v) controlled 250,000 Common Shares beneficially owned by Bourassa Savaria Foundation (representing approximately 0.35% of the issued and outstanding Common Shares), representing in the aggregate 11,630,398 Common Shares (or approximately 16.09% of the issued and outstanding Common Shares).

Immediately after the Transaction, Mr. Bourassa: (i) beneficially owns and controls 232,900 Common Shares (representing approximately 0.32% of the issued and outstanding Common Shares), (ii) controls 7,585,767 Common Shares beneficially owned by Les Élévateurs Savaria Inc. (representing approximately 10.50% of the issued and outstanding Common Shares), (iii) controls 225,231 Common Shares beneficially owned by 9302-0071 Québec Inc. (representing approximately 0.31% of the issued and outstanding Common Shares), (iv) controls 336,500 Common Shares beneficially owned by 9264-4582 Québec Inc. (representing approximately 0.47% of the issued and outstanding Common Shares) and (v) controls 250,000 Common Shares beneficially owned by Bourassa Savaria Foundation (representing approximately 0.35% of the issued and outstanding Common Shares), representing in the aggregate 8,630,398 Common Shares (or approximately 11.94% of the issued and outstanding Common Shares).

An early warning report containing additional information with respect to the foregoing matters will be filed under the SEDAR+ profile of Savaria at www.sedarplus.ca and may also be obtained by contacting Mr. Bourassa at the coordinates listed below.

About Savaria Corporation

Savaria Corporation (corp.savaria.com) is one of the global leaders in the accessibility industry. It provides accessibility solutions for the physically challenged to increase their comfort, their mobility and their independence. Its product line is one of the most comprehensive on the market. Savaria designs, manufactures, distributes and installs accessibility equipment, such as elevators for home and commercial use, stairlifts for straight and curved stairs, vertical and inclined wheelchair lifts and dumbwaiters. In addition, Savaria manufactures and markets a comprehensive selection of pressure management products, medical beds, as well as an extensive line of medical equipment and solutions for the safe movement of patients, such as transfer, lifting and repositioning aids. The Corporation operates a sales network of dealers worldwide and direct sales offices in North America, Europe (UK, Netherlands, Switzerland, Italy, Germany, Poland and Czech Republic) and Australia. Savaria employs approximately 2,600 people globally and its plants are located across Canada, the United States, Mexico, Europe and China.

Cautionary Notice Regarding Forward-Looking Statements

Certain information in this press release may constitute “forward-looking statements” regarding Savaria and Mr. Marcel Bourassa. Most frequently, but not invariably, forward-looking statements are identified by the use of such terms as “plan”, “expect”, “should”, “could”, “budget”, “expected”, “estimated”, “forecast”, “intend”, “anticipate”, “believe”, variants thereof (including negative variants) or statements that certain events, results or shares “could”, “should” or “will” occur or be achieved. Such statements involve known and unknown risks, uncertainties and other factors liable to cause actual results, performance or achievements to differ materially from those set forth in or underlying the forward- looking statements. Such factors notably include general, economic, competitive, political and social uncertainties, the risks set forth under “Risks and Uncertainties” in Savaria’s latest Annual MD&A as well as other risks detailed from time to time in reports filed by Savaria with securities regulators in Canada. Although Savaria has attempted to identify the key elements liable to cause actual measures, events or results to differ from those described in the forward-looking statements, other factors could have an impact on the reality and produce unexpected results. The forward-looking statements contained herein are valid at the date of this press release. Savaria undertakes no obligation to update forward-looking statements if circumstances or management’s estimates or opinions should change, except as required by law. As there can be no assurance that these forward-looking statements will prove accurate, actual future results and events could differ materially from those anticipated therein. Accordingly, readers are strongly advised not to unduly rely on these forward-looking statements.

For further information:    
 
Sébastien Bourassa
President and CEO
1. 800.661.5112 
sb@savaria.com

Stephen Reitknecht, CPA, CA
Chief Financial Officer
1.800.661.5112, ext. 3370
sreitknecht@savaria.com
 

Facebook : https://www.facebook.com/savariabettermobility
Instagram :https://www.instagram.com/savariacorp/
LinkedIn: https://ca.linkedin.com/company/savaria

ARLINGTON, Va., Sept. 29, 2026 (GLOBE NEWSWIRE) — Leonardo DRS, Inc. (Nasdaq: DRS) has scheduled a conference call for Thursday, October 29, 2026 beginning at 10:00 a.m. (ET) to discuss its third quarter 2026 results. The company plans to issue its quarterly earnings press release prior to the conference call.

The live audio broadcast of Leonardo DRS’s conference call with corresponding press release and supplemental information will be available on the company’s investor relations website. To attend the conference call or webcast, participants should register online at https://investors.leonardodrs.com.

A replay will be available on the company’s website approximately two hours after the conclusion of the conference call and will remain available for 90 days.

About Leonardo DRS

Leonardo DRS, Inc. (Nasdaq: DRS) is at the forefront of developing transformative defense technologies using its proven agility and delivering innovative solutions for U.S. national security customers and allies worldwide. We specialize in rapidly providing high-performance, multi-domain capabilities across next-generation advanced sensing, network computing, force protection, and electric power and propulsion. Our reputation as a trusted provider is built on a continuous focus on practical innovation, delivering quality, and meeting our customers’ most demanding mission requirements. For further information on our complete range of capabilities, visit www.LeonardoDRS.com.

Forward-Looking Statements

This communication contains statements that constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. Those statements reflect current expectations, assumptions and estimates of future performance and economic conditions. The company cautions investors that any forward-looking statements are subject to risks and uncertainties that may cause actual results and future trends to differ materially from those matters expressed in or implied by such forward-looking statements.

Leonardo DRS Investor Relations Contact
Camilla Yanushevsky
Director, Investor Relations
+1 571 309 8216
investorrelations@drs.com

Leonardo DRS Media Contact
Charles Jones
Director, Marketing and Corporate Communications
+1 571 737 8800
charles.jones@drs.com

This press release was published by a CLEAR® Verified individual.

EagleNXT’s newly developed anti-jamming technology performs strongly in contested DDIL environment and advances toward production readiness

ALLEN, Texas, Sept. 29, 2026 (GLOBE NEWSWIRE) — AgEagle Aerial Systems Inc. (dba, EagleNXT) (the “Company” or “EagleNXT”) (NYSE: UAVS), a leading provider of full-stack drone, counter-UAS, and specialty sensor system solutions for defense, government, and commercial applications worldwide, today announced its participation in a Denied, Disrupted, Intermittent and Limited (DDIL) testing environment hosted at Camp Grayling Joint Maneuver Training Center, part of Michigan’s National All-Domain Warfighting Center (NADWC), from September 13-18, 2026, where the Company’s newly developed anti-jamming technology performed strongly in realistic contested conditions and continued to demonstrate readiness for a near-term transition toward production.

The event, hosted by the Michigan Department of Military and Veterans Affairs in coordination with Army Test and Evaluation Command and the Threat System Management Office, is aligned with the U.S. Army’s Permissive Range Initiative, which is intended to expand opportunities for industry and military organizations to rapidly test and evaluate emerging technologies in realistic operational environments.

During the testing event, participating organizations evaluated systems in communications, positioning, navigation, timing, and radio-frequency environments designed to replicate contested battlefield conditions. EagleNXT used the event to exercise its eBee VISION UAS equipped with advanced anti-jamming capability in demanding DDIL conditions, and the Company observed strong performance that reinforced confidence in the maturity of the technology and its path toward production availability.

“Testing in DDIL environments is essential to proving that unmanned systems can operate when traditional communications and navigation sources are degraded or denied,” said Bill Irby, Chief Executive Officer of EagleNXT. “The event provided an important opportunity to exercise our eBee VISION featuring newly developed anti-jamming technology in a realistic contested environment, and we were pleased with how well the capability performed. The technology is progressing well through final readiness steps and we expect to begin production later this year. Participating in the NADWC event gave EagleNXT the opportunity to demonstrate and refine capabilities in the types of realistic, multi-domain conditions that defense customers increasingly require. Events like this accelerate innovation, strengthen operational readiness, and support our long-term positioning in the defense and government UAS market.”

Camp Grayling’s expansive training areas, varied terrain, electromagnetic spectrum access, and multi-domain capabilities provide a realistic environment for evaluating emerging technologies before they are fielded. The NADWC includes nearly 148,000 acres of maneuver space at Camp Grayling and more than 17,000 square miles of special-use military airspace at the Alpena Combat Readiness Training Center, supporting training and testing across land, air, maritime, space, and cyber domains.

The Army’s Permissive Range Initiative and related experimentation programs are designed to help industry partners identify capability gaps, validate new technologies, and move emerging systems from development and prototyping toward operational use. EagleNXT’s participation reflects the Company’s ongoing focus on providing resilient unmanned systems, sensors, anti-jamming technology, and software-enabled solutions for defense and government customers operating in complex environments.

For more information about the full suite of EagleNXT UAS and sensor solutions, visit eaglenxt.com or contact the EagleNXT Media Relations team.

About EagleNXT

EagleNXT is a leading developer of high-performance drones, advanced sensors, and intelligent software solutions that deliver critical aerial intelligence to customers around the world. With more than one million flights conducted globally, EagleNXT’s platforms are trusted across defense, public safety, agriculture, infrastructure, and environmental monitoring applications. The Company’s drone systems have achieved multiple industry firsts, including FAA approvals for Operations Over People (OOP) and Beyond Visual Line of Sight (BVLOS), as well as EASA C2 certification in Europe and inclusion on the U.S. Department of Defense’s Blue UAS list. EagleNXT’s sensors are integrated on more than 150 different drone models and are used in over 100 research publications worldwide, reinforcing its leadership in precision agriculture, surveying, and environmental sustainability initiatives.

Forward-Looking Statements

Certain statements in this press release may constitute “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, contained in this press release are forward-looking statements. Forward-looking statements contained in this press release may be identified by the use of words such as “anticipate,” “believe,” “contemplate,” “could,” “estimate,” “expect,” “intend,” “seek,” “may,” “might,” “plan,” “potential,” “predict,” “project,” “suggest,” “target,” “aim,” “should,” “will,” “would,” or the negative of these words or other similar expressions, although not all forward-looking statements contain these words. Forward-looking statements are based on AgEagle’s current expectations and are subject to inherent uncertainties, risks and assumptions that are difficult to predict, including risks related to the timing and fulfilment of current and future purchase orders relating to AgEagle’s products, the success of new programs and software updates, the ability to implement a new strategic plan and the success of a new strategic plan. For a further discussion of risks and uncertainties that could cause actual results to differ from those expressed in these forward-looking statements, as well as risks relating to the business of AgEagle in general, see the risk disclosures in the most recently filed Annual Report on Form 10-K and in subsequent reports on Forms 10-Q and 8-K and other filings made with the SEC by AgEagle. All such forward-looking statements speak only as of the date they are made, and AgEagle undertakes no obligation to update or revise these statements, whether as a result of new information, future events or otherwise.

Media Contact
Steve Mathias
+1 (817) 505-6058
steve.mathias@eaglenxt.com

LinkedIn Facebook X YouTube

Investor Relations
Email: UAVS@EagleNXT.com

Potential repeat engagements with existing customers; if finalized, execution anticipated from mid-2027 through the end of 2028

WUXI, China, Sept. 29, 2026 (GLOBE NEWSWIRE) — HUHUTECH International Group Inc. (Nasdaq: HUHU) (“HUHU” or the “Company”), a system integration provider that designs and implements integrated facility management systems and industrial automation monitoring systems for the optoelectronic, semiconductor, telecom, and logistics industries, today detailed two potential projects in Japan with separate existing customers that the Company anticipates may advance toward contracting in the fourth quarter of 2026. Based on the Company’s current estimates, the two potential projects have an aggregate value of approximately US$12 million.

One project covers power system engineering and the other covers heated piping system integration. If finalized as anticipated, project execution is currently expected to begin in approximately June 2027 and continue through the end of 2028. If finalized, the projects would be performed through HUHUTECH’s existing operations in Japan, including in Kumamoto Prefecture and through its Hiroshima Project Office, launched in December 2025, consistent with the Company’s focus on fewer, larger engagements in Japan.

“When existing customers come back with new projects, it tells us our engineering and delivery in Japan are meeting the standard this market demands,” said Yujun Xiao, Chief Executive Officer of HUHUTECH. “If finalized, these two projects would provide project visibility extending through 2028 and further strengthen our position in one of the world’s most demanding semiconductor markets.”

Mr. Xiao continued, “Beyond our semiconductor customer base, we believe our power system capabilities are well suited to other infrastructure-intensive sectors, including computing infrastructure, where power reliability and system sophistication are increasingly critical. We intend to pursue opportunities in Japan through both repeat engagements with established customers and new customer relationships across these industries.”

The projects described above remain subject to further commercial discussions, definitive agreements and the receipt of purchase orders. The estimated aggregate value described above reflects the Company’s current expectations and is not based on definitive agreements. The final contract value, if any, may differ materially from this estimate, including as a result of changes in project scope or fluctuations in foreign currency exchange rates. There can be no assurance that either project will be finalized on the anticipated terms, value or timeline, or at all.

About HUHUTECH International Group Inc.

HUHUTECH International Group Inc. (Nasdaq: HUHU) is a professional system integration provider that designs and implements integrated facility management systems and industrial automation monitoring systems for the optoelectronic, semiconductor, telecom, and logistics industries. Through its operating subsidiaries in the People’s Republic of China, Japan, the United States, Germany, and Singapore, the Company delivers customized fixed-price engagements spanning project planning, system coding, hardware installation and configuration, and also supplies related equipment. HUHU China holds a first-class construction enterprise qualification and maintains “high-tech enterprise” tax status in the PRC through December 2028. The Company is headquartered in Wuxi, Jiangsu Province, China. For more information, visit https://ir.huhutech.com.cn. 

Safe Harbor Statement

Certain statements in this announcement are forward-looking statements within the meaning of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995 and other Federal securities laws. All statements other than statements of historical facts included in this announcement are forward-looking statements. Forward-looking statements include, but are not limited to, express or implied statements regarding expectations, hopes, beliefs, intentions, or strategies of the Company regarding the future. Forward-looking statements are neither historical facts nor assurances of future performance. Instead, they are based solely on the Company’s current beliefs, expectations, and assumptions regarding the future of its business, future plans and strategies, projections, anticipated events and trends, the economy, and other future conditions. Because forward-looking statements relate to the future, they are subject to inherent uncertainties, risks, and changes in circumstances that are difficult to predict and many of which are outside of the Company’s control. You can identify forward-looking statements by those that are not historical in nature, particularly those that use terminology such as “may,” “should,” “expects,” “anticipates,” “contemplates,” “estimates,” “believes,” “plans,” “projected,” “predicts,” “potential,” or “hopes” or the negative of these or similar terms. Forward-looking statements are based on current expectations and assumptions that, while considered reasonable, are inherently uncertain. New risks and uncertainties may emerge from time to time, and it is not possible to predict all risks and uncertainties. The Company’s actual results may differ materially from those indicated in the forward-looking statements. Therefore, you should not rely on any of these forward-looking statements. Important factors that could cause our actual results to differ materially from those indicated in the forward-looking statements include the risks and uncertainties described in the Company’s annual report on Form 20-F for the year ended December 31, 2025, filed with the U.S. Securities and Exchange Commission (the “Commission”) on April 28, 2026, and the Company’s other filings with the Commission. Except as required by law, the Company undertakes no obligation to update any forward-looking statement, whether written or oral, publicly, that may be made from time to time, whether as a result of new information, future developments, or otherwise.

Company Contact

Email: ir@huhutech.com 

Website: www.huhutech.com 

Investor Relations Contact

Matthew Abenante, IRC

President

Strategic Investor Relations LLC

Phone: +1 (347) 947-2093

Email: matthew@strategic-ir.com 

Web: www.strategic-ir.com 

# # #

Following a “discovery within a discovery” at Lawson 4, MAX Power is advancing its Natural Hydrogen commercial validation program with a 30-km step-out testing the Prairie Evaporite “trap and seal”. 

Detailed planning is also accelerating for an extensive completions program across Lawson targeting flow, volume and Natural Hydrogen concentrations.

New Video: The Next Chapter
https://youtu.be/LUIHqS35rMg

REGINA, Saskatchewan, Sept. 29, 2026 (GLOBE NEWSWIRE) — MAX Power Mining Corp. (CSE: MAXX; OTC: MAXXF; FSE: 89N) (“MAX Power” or the “Company”) is pleased to report that Lawson 5 is proceeding as expected with intermediate casing completed yesterday at approximately 1,100 meters (measured depth). The first major horizon of interest within the next several hundred meters will be the Prairie Evaporite, interpreted to be a key trap and seal feature for the accumulation of Natural Hydrogen. At deeper levels, a faulted fracture system controls the basement complex dissolution process of the evaporite salt and will be of intense interest to the MAX Power technical team as it attempts to significantly expand the scale of the Lawson Discovery.

Lawson 5 is a 30-km step-out northeast of Lawson 4 and is testing the potential west-to-east extension of Canada’s first subsurface Natural Hydrogen system all the way from the first four wells near Central Butte to the “Salt Wall” at the edge of the Prairie Evaporite. The “Salt Wall Corridor” continues north-south for 475 km through the MAX Power-dominated Genesis Trend to the Saskatchewan-North Dakota border, further highlighting the potential scale implications of success at Lawson 5.

Mr. Steve Halabura, MAX Power Chief Geoscientist, commented, “Upon initial review of drill core from key intervals, Lawson 4 is even more exciting to us, so we very much look forward to results from Lawson 5. We know that fluids and gases have migrated up-dip from the southwest toward the Salt Wall. We had no hesitation in stepping out 30 kilometers – we continue to vigorously test a geological model we have had great success with from the start. Detailed planning for our completions round continues and we look forward to sharing more details on that very soon.”    

Cyndi Edwards’ PRmediaNow Interview Excerpt with Chad Levesque

“When geology is telling you something, it favors the bold” – first excerpt of interview between Cyndi Edwards of PRmediaNow and MAX Power President Chad Levesque. Click on the link below to view.

https://youtu.be/qkGvnNxFfb0

Figure 1 – The Genesis Trend

MAX Power Mining Corp.

Why This Matters to Investors

Lawson 5 represents a pivotal test of scale for MAX Power. The first four Lawson wells have progressively defined Canada’s first confirmed subsurface Natural Hydrogen system. Now, approximately 30 km northeast, Lawson 5 is beginning to test whether the geological architecture identified at Lawson extends toward the Salt Wall and into a much larger regional setting. The Salt Wall Corridor continues for approximately 475 km through the Genesis Trend toward North Dakota, while Bracken, approximately 325 km southwest on a different trend, contains multiple prospective Natural Hydrogen and helium zones. Together, these targets are expanding the exploration thesis well beyond the boundaries of a single discovery area.

The bigger opportunity is basin scale. Lawson 5 is testing potential geological scale while upcoming completions at Lawson and Bracken are designed to address the critical commercial questions of composition, flow and deliverability. At the same time, every well expands the proprietary geological, geophysical and reservoir dataset feeding MAXX LEMI. MAX Power is therefore advancing two increasingly connected assets: the Natural Hydrogen opportunity beneath Saskatchewan and the intelligence being built to understand and potentially identify these systems at greater scale.

Figure 2: Drilling at Lawson 3 Well, Genesis Trend (Aug. 2026)

MAX Power Mining Corp.

Amended Marketing Agreement

MAX Power has amended its investor marketing and consulting agreement (the “Agreement”) with RazorPitch Inc. (“RazorPitch”), previously announced in the Company’s news release dated September 15, 2026, to expand the scope of services and increase the compensation payable thereunder.

Under the amendment, RazorPitch will provide additional investor awareness marketing services, including digital, social, influencer and broker marketing, together with news amplification services, in addition to the services previously disclosed under the Agreement.

In consideration for the additional services, the Company will pay RazorPitch an additional cash fee of $200,000 USD, bringing total cash consideration payable to RazorPitch under the Agreement, as amended, to $350,000 USD. No securities of the Company are issuable to RazorPitch as compensation under the Agreement, as amended.

All other terms of the Agreement remain unchanged. To the knowledge of MAX Power, RazorPitch and its principals remain at arm’s length to the Company and do not hold any securities of the Company. RazorPitch is responsible for ensuring that its promotional activities comply with applicable securities laws and CSE policies.

Engagement of PRmediaNow

The Company has re-entered into a services agreement with PRmediaNow to provide media outreach and communications services aimed at increasing awareness of the Company and its business activities. Such activities will take place to generate editorial earned media coverage with mainstream media outlets, trade publications, podcasts and other media verticals.

PRmediaNow will receive compensation of $5,000 per month for a six-month term, commencing September 1, 2026 and ending March 1, 2027. In addition, the Company has granted PRmediaNow 75,000 stock options exercisable at a price of $3.68 per common share for a period of 24 months from the date of grant, subject to the policies of the Canadian Securities Exchange (the “CSE”).

PRmediaNow Inc. is headquartered in Ottawa, Ontario, with a satellite division in Tampa, Florida. The firm specializes in securing earned media coverage and producing video content, including shareholder-focused interviews hosted by veteran broadcaster Cyndi Edwards. Ms. Edwards has hosted television news programs in both the United States and Canada, most recently anchoring a morning show syndicated across 180 U.S. markets.

Stay Connected by Following Us On

X (formerly Twitter): x.com/MaxPowerMining
LinkedIn: linkedin.com/company/max-power-mining-corp
Instagram: instagram.com/maxpowerminingcorp
YouTube: youtube.com/@maxpowerminingcorp
and by joining our Telegram channel: t.me/MaxpowerMining

Recent Videos

Video: The Time is Now
https://youtu.be/TKnEnBEQ0TM

What if the Answer to Natural Hydrogen Was Beneath Our Feet All Along?
https://youtu.be/srV-RCmzzPk

President Chad Levesque On Significance of Lawson
https://youtu.be/wCeFQTKtOuI

What is Natural Hydrogen?
https://www.youtube.com/watch?v=S0bqqZeIpxc

Genesis Explained: Its “Salt Barrier” Advantage and Proximity to Demand
https://www.youtube.com/watch?v=3ytpHdve6S8

The Genesis Trend’s Industrial Corridor
https://youtube.com/shorts/IAgALH_s3mI

Lawson – Canada’s First Big Step into Natural Hydrogen
https://www.youtube.com/watch?v=lTTOwMxz_zo

MAX Power Leaps at Lawson
https://www.youtube.com/watch?v=Yr4Ha06__Eg

Watch the Drill in Action
https://www.youtube.com/watch?v=eguNGAfdIek

MAX Power Saskatchewan Natural Hydrogen Documentary Video
https://www.youtube.com/watch?v=TXGDtTUbJ2c

History in The Making at Lawson – Video Immediately Ahead of Drill Rig Setup
https://www.youtube.com/watch?v=BNHazk9Sy4E

About MAX Power

MAX Power is an innovative mineral and energy exploration company focused on the shift to decarbonization. The Company’s Lawson Discovery near Central Butte, Saskatchewan, represents Canada’s first-ever subsurface Natural Hydrogen system confirmed through deep drilling with data validated by three independent labs. MAX Power has built dominant district-scale land positions across Saskatchewan with approximately 2.5 million acres (~1 million hectares) of permits covering prime exploration ground prospective for large-volume accumulations of Natural Hydrogen, and has commenced a multi-well follow-up drill program to validate the commerciality of the broader Lawson Complex interpreted to cover a 28 sq. km area along the 475-km Genesis Trend. MAX Power also holds a significant equity position in Homeland Critical Minerals, which now owns the Willcox Project in Arizona, a lithium discovery confirmed in early 2024 by MAX Power. MAX Power is committed to responsible exploration and development practices that prioritize environmental stewardship, meaningful community engagement, and strong corporate governance.

On behalf of the Board of Directors,

Ran Narayanasamy, CEO
MAX Power Mining Corp.
info@maxpowermining.com

For further information, please contact:

Chad Levesque, President
Ph: 1-306-981-4753
chad@maxpowermining.com

Media Contact:

Sarah Mawji, Venture Strategies
sarah@venturestrategies.com

Cautionary Statement and Forward-Looking Information

This news release contains certain forward-looking statements and forward-looking information (collectively, “forward-looking information”) within the meaning of applicable securities laws. Forward-looking information is often identified by words such as “anticipate”, “believe”, “continue”, “could”, “estimate”, “expect”, “intend”, “may”, “plan”, “potential”, “predict”, “project”, “should”, “will” and similar expressions.

Forward-looking information is based on management’s current expectations, estimates, projections and assumptions, including, among other things, that required regulatory approvals will be obtained, financing will be available on acceptable terms, planned exploration, appraisal and development activities will proceed as anticipated, equipment and personnel will be available as required, geological interpretations and technical results will support further advancement of the Company’s projects, and market conditions will remain favourable.

Forward-looking information is subject to known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to differ materially from those expressed or implied by such forward-looking information. Such risks and uncertainties include, without limitation, risks relating to exploration and development activities, geological and technical uncertainties, commercialization of Natural Hydrogen, reservoir performance, infrastructure availability, strategic partnership opportunities, market acceptance, commodity and energy prices, access to capital, regulatory approvals, environmental and permitting requirements, and general economic, market and business conditions.

There can be no assurance that the Company’s plans, expectations or objectives will be achieved. Readers are cautioned not to place undue reliance on forward-looking information. Forward-looking information contained in this news release is made as of the date hereof and the Company undertakes no obligation to update or revise any forward-looking information, whether due to new information, future events or otherwise, except as required by applicable securities laws.

Additional information regarding the Company and the risks and uncertainties affecting its business and operations is available under the Company’s profile on SEDAR+ at www.sedarplus.ca.

Neither the Canadian Securities Exchange nor its Regulation Services Provider accepts responsibility for the adequacy or accuracy of this release

Photos accompanying this announcement are available at:

https://www.globenewswire.com/NewsRoom/AttachmentNg/0c21aa63-005f-42c4-b0ab-fdf15bad7b96

https://www.globenewswire.com/NewsRoom/AttachmentNg/3ab03eb5-af73-4199-84eb-19ea93ec939b

Unique investment vehicle provides efficient access to equity capital
Outstanding debt of the original Note lowered by approximately 43%
No issuance of common stock or dilutive warrants

LAWRENCEVILLE, N.J., Sept. 29, 2026 (GLOBE NEWSWIRE) — IMUNON, Inc. (Nasdaq: IMNN), (“IMUNON” or the “Company”), a clinical-stage biotechnology company developing DNA-mediated immunotherapies, today announced that it has entered into an Exchange Agreement, under which $1.2 million of outstanding debt, together with accrued and unpaid interest, was exchanged for shares of the Company’s newly designated, non-convertible Series B Preferred Stock. The transaction reduces the Company’s outstanding debt by approximately 43% and increases stockholders’ equity while preserving financial flexibility, with no issuance of common stock or warrants.

“This transaction reduces outstanding debt and increases our shareholder equity while minimizing dilution for existing shareholders,” said Stacy R. Lindborg, Ph.D., President and Chief Executive Officer of IMUNON. “By exchanging a portion of our outstanding debt for preferred equity, we reduce future cash obligations. I want to thank our financing partner for their continued confidence in the promise of IMNN-001. We believe this structure better positions the Company to execute our clinical strategy while preserving future financial flexibility.”

Pursuant to the Exchange Agreement, IMUNON issued 120 shares of Series B Preferred Stock, at a purchase price of $10,000 per share and a stated value of $12,000 per share, in exchange for $1.2 million of principal and accrued and unpaid interest outstanding under the A-1 Note. The Company has designated 200 shares of Series B Preferred Stock, which are not convertible into shares of common stock, and expects the shares to be classified as permanent equity. The transaction does not provide the Company with additional cash proceeds.

The shares of Series B Preferred Stock were issued in a private placement in reliance on an exemption from the registration requirements of the Securities Act of 1933, as amended (the “Securities Act”). The securities have not been registered under the Securities Act and may not be offered or sold in the United States absent registration or an applicable exemption from the registration requirements. Additional information regarding the transaction will be contained in a Current Report on Form 8-K to be filed by the Company with the Securities and Exchange Commission.

About IMUNON

IMUNON is a clinical-stage biotechnology company focused on advancing a portfolio of innovative treatments that harness the body’s natural mechanisms to generate safe, effective and durable responses across a broad array of human diseases, constituting a differentiating approach from conventional therapies. IMUNON is developing its non-viral DNA technology across its modalities. The first modality, TheraPlas®, is developed for the gene-based delivery of cytokines and other therapeutic proteins in the treatment of solid tumors where an immunological approach is deemed promising. The second modality, PlaCCine®, is developed for the gene delivery of viral antigens that can elicit a strong immunological response.

The Company’s lead clinical program, IMNN-001, is a DNA-based immunotherapy for the localized treatment of advanced ovarian cancer that has completed multiple clinical trials, including one Phase 2 clinical trial (OVATION 2), and is currently being studied in a Phase 3 clinical trial (OVATION 3). IMNN-001 works by instructing the body to produce safe and durable levels of powerful cancer-fighting molecules, such as interleukin-12 and interferon gamma, at the tumor site. Additionally, the Company has completed dosing in a first-in-human study of its COVID-19 booster vaccine (IMNN-101). The Company will continue to leverage these modalities and to advance, either directly or through partnership, the technological frontier of plasmid DNA to better serve patients with difficult-to-treat conditions. For more information, please visit www.imunon.com.

Forward-Looking Statements

IMUNON wishes to inform readers that forward-looking statements in this release are made pursuant to the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995. All statements, other than statements of historical fact, including, but not limited to, the expected accounting treatment of the Series B Preferred Stock, the anticipated benefits of the transaction, and the Company’s plans and expectations with respect to its development programs more generally, are forward-looking statements. We generally identify forward-looking statements by using words such as “may,” “will,” “expect,” “plan,” “anticipate,” “estimate,” “intend” and similar expressions (as well as other words or expressions referencing future events, conditions or circumstances). Readers are cautioned that such forward-looking statements involve risks and uncertainties including, without limitation, the Company’s ability to satisfy its remaining obligations under the A-1 Note and its redemption obligations in respect of the Series B Preferred Stock; the possibility that the accounting treatment of the Series B Preferred Stock as permanent equity is subsequently revised; the Company’s ability to maintain compliance with the continued listing requirements of The Nasdaq Stock Market; the Company’s need to raise additional capital; uncertainties relating to unforeseen changes in the course of research and development activities and in clinical trials, including the fact that interim results are not necessarily indicative of final results; the uncertainties of and difficulties in analyzing interim clinical data; the significant expense, time and risk of failure in conducting clinical trials; the need for IMUNON to evaluate its future development plans; possible actions by customers, suppliers, competitors or regulatory authorities; and other risks detailed from time to time in IMUNON’s filings with the Securities and Exchange Commission. IMUNON assumes no obligation, except to the extent required by law, to update or supplement forward-looking statements that become untrue because of subsequent events, new information or otherwise.

Investor Contact

Valter Pinto
KCSA Strategic Communications
212-896-1254
imunon@kcsa.com

Nayax and Getnet

Nayax and Getnet
Nayax and Getnet
  • The agreement will enable operators of vending machines, electric-vehicle chargers, self-service kiosks and other automated self-service businesses to benefit from Nayax’s payment technologies and Getnet’s local acquiring network.
  • Nayax will roll out across Getnet’s acquiring network in Chile first, followed by Spain, Portugal, Brazil, Mexico, and Argentina.

MADRID and HERZLIYA, Israel, Sept. 29, 2026 (GLOBE NEWSWIRE) — Getnet, the global merchant payments platform and the leading payment solutions provider in Latin America and Iberia, and Nayax Ltd (NASDAQ: NYAX, TASE: NYAX), a global commerce enablement, payments, and loyalty platform helping merchants scale their business, today announced its partnership aimed at accelerating integrated payment acceptance and commerce services across key markets in Europe and Latin America.

The agreement will enable operators of vending machines, electric-vehicle chargers, self-service kiosks and other automated self-service commerce businesses to access an integrated payment solution combining Nayax technology with the Getnet acquiring platform in Latin America and Iberia. Operators will gain a single, reliable way to accept cashless payments across their unattended machines, and their customers will gain a smoother, more familiar checkout process wherever they pay.

The partnership will open key new Latin American markets for Nayax and strengthen its regional presence. Getnet, in turn, will broaden its product portfolio into the unattended space and increase processing volumes. The rollout will begin in Chile within the coming weeks and expand progressively across Spain, Portugal, Brazil, Mexico and Argentina, offering Nayax a scalable route into the region and a foundation for sustained growth.

“This partnership is an important milestone for Nayax, opening new markets across Latin America while strengthening our offering in the countries where we already operate,” said Oren Tepper, Nayax’s Chief Commercial Officer. “Together with Getnet, we can provide merchants a stronger, more integrated way to accept payments.”

“This agreement represents another important step in our strategy to become the preferred payments partner for technology companies, ISVs and commerce platforms around the world,” said Fabrice Mendez, Global Head of Partnerships at Getnet. “Nayax is a recognized global leader in unattended commerce, and together we will help merchants benefit from integrated payment experiences that combine global innovation with local acquiring expertise.”

About Getnet
Getnet is the leading fintech provider of payment solutions in Latin America and Iberia. We offer robust, omnichannel solutions that cater to the unique needs of our customers, integrating seamlessly with existing ecosystems while delivering powerful proprietary capabilities. In 2025, Getnet processed over €238 billion across 10.5 billion transactions, serving 1.2 million clients. The company ranks as the largest acquirer in Latin America by number of transactions, and among the top 10 globally. Getnet operates across Brazil (as an e-commerce leader), Mexico, Chile, Argentina, Uruguay, Colombia, Spain, and Portugal. Getnet is built to serve merchants, ISVs, PayFacs, orchestrators, platforms and the next generation of commerce enablers, connecting technologies and markets through a unified, omnichannel payment experience that boosts performance and drives growth

About Nayax 
Nayax is a global commerce enablement, payments and loyalty platform designed to help merchants scale their business. Nayax offers a complete solution including localized cashless payment acceptance, management suite, and loyalty tools, enabling merchants to conduct commerce anywhere, at any time. With foundations and global leadership in serving unattended retail, Nayax has transformed into a comprehensive solution focused on our customers’ growth across multiple channels. As of June 30, 2026, Nayax has 13 global offices, approximately 1,250 employees, connections to more than 80 merchant acquirers and payment method integrations, and is globally recognized as a payment facilitator. Nayax’s mission is to improve our customers’ revenue potential and operational efficiency, effectively and simply. For more information, please visit https://www.nayax.com/

Forward-Looking Statements
Forward-Looking Statements This press release contains statements that constitute forward-looking statements. Many of the forwardlooking statements contained in this press release can be identified by the use of forward-looking words such as “anticipate,” “believe,” “could,” “expect,” “should,” “plan,” “intend,” “estimate” and “potential,” among others. Forward-looking statements include, but are not limited to, statements regarding our intent, belief or current expectations, such as statements in this press release regarding our financial outlook, future business prospects and the impact of recent acquisitions or partnerships published by the Company. Forward-looking statements are based on our management’s beliefs and assumptions and on information currently available to our management. Such statements are subject to risks and uncertainties, and actual results may differ materially from those expressed or implied in the forwardlooking statements due to various factors, including, but not limited to: our expectations regarding general market conditions, including as a result of global economic trends; changes in consumer tastes and preferences; fluctuations in inflation, interest rate and exchange rates in the global economic environment; the availability of qualified personnel and the ability to retain such personnel; changes in commodity costs, labor, distribution and other operating costs; our ability to implement our growth strategy; changes in government regulation and tax matters; other factors that may affect our financial condition, liquidity and results of operations; general economic, political, demographic and business conditions in Israel; the success of operating initiatives, including advertising and promotional efforts and new product and concept development by us and our competitors; and other risk factors discussed under “Risk Factors” in our annual report on Form 20-F filed with the SEC on March 9, 2026 (our “Annual Report”). The preceding list is not intended to be an exhaustive list of all of our forward-looking statements. The forward-looking statements are based on our beliefs, assumptions and expectations of future performance, taking into account the information currently available to us. These statements are only estimates based upon our current expectations and projections about future events. There are important factors that could cause our actual results, levels of activity, performance or achievements to differ materially from the results, levels of activity, performance or achievements expressed or implied by the forward-looking statements. In particular, you should consider the risks provided under “Risk Factors” in our Annual Report. You should not rely upon forward-looking statements as predictions of future events. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee that future results, levels of activity, performance and events and circumstances reflected in the forward-looking statements will be achieved or will occur. Each forward-looking statement speaks only as of the date of the particular statement. Except as required by law, we undertake no obligation to update publicly any forward-looking statements for any reason, to conform these statements to actual results or to changes in our expectations.

Media contacts
Getnet: comms@getnet.net
Nayax: Scott Gamm Scott@strategyvoiceassociates.com

Investor Relations contacts
Aaron Greenberg
Chief Strategy Officer
IR@nayax.com

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/88548ce4-d4f2-477e-a9db-d6032690ca14

HONG KONG, Sept. 29, 2026 (GLOBE NEWSWIRE) — 3 E Network Technology Group Limited (Nasdaq: MASK) (the “Company” or “3 E Network”), a business-to-business (“B2B”) information technology (“IT”) business solutions provider, committed to becoming a next-generation artificial intelligence (“AI”) infrastructure solutions provider, today announced the initiation of a global vendor evaluation and Request for Proposal (“RFP”) process targeting high-density server clusters, liquid cooling infrastructure, and core networking equipment for its multi-megawatt AI compute center in Mikkeli, Finland. Following the recent release of the Mikkeli Data Center Blueprint, the finalization of multi-megawatt power parameters, and the establishment of compute distribution channels, this procurement process transitions the facility into the practical phase of physical hardware selection and deployment. To guide the supply chain procurement, the evaluation focuses on four technical requirements set out in the blueprint:

1. Implementing 120kW+ Rack Power Density and Direct-to-Chip Liquid Cooling Standards

To address the escalating Thermal Design Power in Large Language Model (“LLM”) training workloads, and in alignment with previously established thermal management objectives, 3 E Network requires that proposed thermal management solutions support rack power densities of 120kW and above (“120kW+”).

Given the physical constraints of traditional air-cooling architectures when managing next-generation high-power AI accelerators, this evaluation will prioritize advanced Direct-to-Chip liquid cooling technologies. By employing micro-channel cold plates affixed directly to the silicon core, this technology utilizes high specific heat capacity to manage primary component heat. This standard aims to mitigate localized thermal hotspots, maintain thermodynamic stability during extended training cycles, extend hardware operational life, and optimize the facility’s overall Power Usage Effectiveness.

2. Evaluating Next-Gen GPU Architecture Compatibility and Non-Blocking Network Topologies

The RFP process prioritizes “architectural compatibility and stress-test reliability” as key evaluation metrics. The Company’s engineering teams are benchmarking technical requirements against the spatial, power delivery, and data throughput profiles of upcoming flagship AI accelerator architectures, including ecosystems based on Blackwell and Vera Rubin planning.

In line with the high-speed cluster objectives set in the blueprint, the Company has specified high-performance standards for low-latency and non-blocking interconnectivity. Addressing the intensive data interaction demands of LLM training, the evaluation will focus on 800G and above Ethernet and InfiniBand-class leaf-spine topology solutions, aiming to optimize internal data flows and ensure large-scale GPU nodes operate in a highly synchronized environment.

3. Deploying All-Flash NVMe Storage Clusters and Parallel File Systems

In the multimodal model landscape, data transfer efficiency is as vital as underlying computational power. To overcome Data Input/Output (“I/O”) bottlenecks during large-parameter model training and prevent GPU compute idle time, the Company has designated all-flash NVMe over Fabrics storage arrays and high-performance parallel file systems as standard procurement criteria.

This specification requires the storage architecture to deliver high read throughputs at the terabytes-per-second level with microsecond latency. Additionally, the system must support efficient, concurrent model checkpointing capabilities. This allows for the rapid preservation of extensive model state data, thereby effectively facilitating recovery from hardware interruptions, minimizing the loss of training progress, and maintaining the operational efficiency of compute assets.

4. Accommodating 48V DC Power Evolution to Support the Green Energy Architecture

To smoothly integrate with the facility’s green energy architecture and manage the significant transient power spikes associated with new-generation AI chips, 3 E Network requires rack-level power delivery infrastructure to be compatible with and capable of evolving toward a 48V Direct Current busbar architecture. Compared to traditional 12V setups, 48V power delivery lowers line current, which reduces transmission losses and improves end-to-end power conversion efficiency.

Concurrently, the accompanying intelligent Power Distribution Units must provide high conversion efficiency alongside integrated dynamic load balancing and precise energy monitoring. This intelligent power distribution design is intended to offer robust reliability for the underlying electrical grid when high-density clusters manage complex inference tasks or initiate large-scale training runs.

Strategic Outlook and Execution Plan

With the foundational power parameters and commercial distribution channels for the Finnish project established, 3 E Network’s management team views this core hardware evaluation as a crucial phase in translating the theoretical blueprint into physical infrastructure. By outlining technical specifications including the 120kW+ liquid cooling threshold, non-blocking networking, high-throughput I/O, and 48V power compatibility, the Company has communicated clear deployment requirements to the hardware supply chain. 3 E Network is focused on building a robust, industrial-grade technological platform to support the computational demands of large-scale AI models. In the subsequent evaluation period, the Company will engage in detailed technical discussions with selected vendors to finalize the infrastructure matrix selection, accelerating the capital expenditure rollout and the practical commissioning of the Finnish project.

About 3 E Network Technology Group Limited
3 E Network Technology Group Limited is a business-to-business (“B2B”) information technology (“IT”) business solutions provider committed to becoming a next-generation artificial intelligence (“AI”) infrastructure solutions provider. It upholds the industry consensus of “AI and energy symbiosis” and has a strong vision in the field of energy investment. The Company’s business comprises two main portfolios: the data center operation services portfolio and the software development portfolio. For more information, please visit the Company’s website at https://3emask.com/.

Forward-Looking Statements
Certain statements in this announcement are forward-looking statements. These forward-looking statements involve known and unknown risks and uncertainties and are based on the Company’s current expectations and projections about future events that the Company believes may affect its financial condition, results of operations, business strategy, and financial needs. Investors can identify these forward-looking statements by words or phrases such as “approximates,” “assesses,” “believes,” “hopes,” “expects,” “anticipates,” “estimates,” “projects,” “intends,” “plans,” “will,” “would,” “should,” “could,” “may” or similar expressions. The Company undertakes no obligation to update or revise publicly any forward-looking statements to reflect subsequent events or circumstances, or changes in its expectations, except as may be required by law. Although the Company believes that the expectations expressed in these forward-looking statements are reasonable, it cannot assure you that such expectations will turn out to be correct, and the Company cautions investors that actual results may differ materially from the anticipated results and encourages investors to review other factors that may affect the Company’s future results in the Company’s registration statement and other filings with the U.S. Securities and Exchange Commission.

For more information, please contact:

3 E Network Technology Group Limited
Investor Relations Department
Email: ird@3emask.com
Website: https://3emask.com/

Mission-Critical Hardware, Software and Cybersecurity Solutions to be Presented to U.S. Defense Leaders, Tier-1 Partners and Unmanned-Systems Operators

Palo Alto, California, Sept. 29, 2026 (GLOBE NEWSWIRE) — Mobilicom Limited (Nasdaq: MOB), a provider of cybersecure solutions for drones and robotics, today announced its selection to participate in the upcoming ADS, Inc. ISR Drone Showcase, taking place October 7–8, 2026, in Leesburg, Virginia.

The restricted-attendance event brings together U.S. military representatives, government agency leaders, first responders, and leading unmanned aircraft system (UAS) manufacturers to evaluate emerging technologies, review operational requirements, and build partnerships across the defense ecosystem.

Mobilicom will present its field-proven portfolio of mission-critical hardware, software and cybersecurity solutions, highlighting how its technologies enable resilient communications across UAS and other unmanned platforms operating in complex and contested environments

“Being selected for the ISR Drone Showcase provides Mobilicom with a direct channel to the leaders who build, procure and operate mission-critical unmanned systems,” said Oren Elkayam, Chief Executive Officer of Mobilicom. “We look forward to showcasing our latest technologies designed to power, connect and secure unmanned platforms across mission environments.”

Mobilicom’s U.S. Technical Sales Manager Dane Erickson and Vice President of Global Sales David Fagelston will represent the Company and meet with attendees to discuss the evolving role of unmanned systems in modern warfare, emerging capability requirements and potential applications for Mobilicom’s solutions.

Qualified attendees interested in scheduling a meeting with Mobilicom may contact ir@mobilicom.com.

About Mobilicom

Mobilicom is a leading provider of cybersecure robust solutions for the rapidly growing defense and commercial drones and robotics market. Mobilicom’s large portfolio of field-proven technologies includes cybersecurity, software, hardware, and professional services that power, connect, guide, and secure drones and robotics. Through deployments across the globe with over 50 customers, including the world’s largest drone manufacturers, Mobilicom’s end-to-end solutions are used in mission-critical functions.

For investors, please use https://ir.mobilicom.com/
For company, please use www.mobilicom.com

Forward Looking Statements

This press release contains “forward-looking statements” that are subject to substantial risks and uncertainties. All statements, other than statements of historical fact, contained in this press release are forward-looking statements. Forward-looking statements contained in this press release may be identified by the use of words such as “anticipate,” “believe,” “contemplate,” “could,” “estimate,” “expect,” “intend,” “seek,” “may,” “might,” “plan,” “potential,” “predict,” “project,” “target,” “aim,” “should,” “will” “would,” or the negative of these words or other similar expressions, although not all forward-looking statements contain these words. Forward-looking statements are based on Mobilicom Limited’s current expectations and are subject to inherent uncertainties, risks and assumptions that are difficult to predict. Further, certain forward-looking statements are based on assumptions as to future events that may not prove to be accurate. These and other risks and uncertainties are described more fully in the Company’s filings with the Securities and Exchange Commission.

Forward-looking statements contained in this announcement are made as of this date, and Mobilicom Limited undertakes no duty to update such information except as required under applicable law.

For more information on Mobilicom, please contact:

Chris Donovan
Mobilicom Ltd
ir@mobilicom.com

Vancouver, British Columbia, Sept. 29, 2026 (GLOBE NEWSWIRE) — NevGold Corp. (“NevGold” or the “Company”) (TSXV:NAU) (OTCQX:NAUFF) (Frankfurt:5E50) is pleased to announce the results of gravity and CSAMT geophysical surveys completed at its 100% owned, oxide, heap-leachable, resource-stage Nutmeg Mountain Gold Project (the “Project”, “Nutmeg Mountain”) in Idaho. Nutmeg Mountain represents a highly prospective gold system within NevGold’s strategic Western U.S. portfolio. While the Company’s primary capital and operational focus remains firmly anchored on advancing and de-risking its flagship Limousine Butte Gold-Antimony Project, these results underscore the value and hidden upside within NevGold’s broader project pipeline. The geophysical surveys have successfully identified new, high-priority drill targets focused on near-surface Mineral Resource expansion, and potential high-grade feeder structures at depth.

Key Highlights

  • Updated Geological Model Unlocks District-Scale Potential: Nutmeg Mountain is a low-sulphidation epithermal gold system, a deposit type where high-grade feeder structures commonly underlie disseminated near-surface mineralization (Figure 2). NevGold’s new geological model has identified six near-surface gold targets and three potential feeder structures through new geological mapping, Controlled-Source, Audio-Frequency Magnetotelluric (CSAMT), and gravity surveys (Figure 1, Figure 3, Figure 4, Figure 5).
  • Near Surface Targets Focused On Mineral Resource Expansion: six near-surface targets have been defined combining favourable gravity and CSAMT response, which has strong correlation to the 2025 Mineral Resource Estimate (“MRE”) of 1.19 Mozs of Indicated Resources at 0.50 g/t Au (74.2 Mt) and 548 kozs of Inferred Resources at 0.34 g/t Au (49.8 Mt) (2025 MRE Disclosure in Section below).
  • Feeder Targets Focused On High-Grade Discovery: three feeder targets have been defined where gravity and CSAMT inversion align (Figure 1), extending well beyond the base of historical drilling which averaged less than 75 meters depth (246 feet). In the upper 200 meters (656 feet) NevGold interprets the response as intense silicification. At depth it maps the margins of the basement volcanic fault blocks, interpreted as graben-bounding structures or major fault zones. In low-sulphidation epithermal systems, silicified fault zones of this kind commonly host the boiling zones in which high-grade gold could potentially be deposited. These targets have not been tested by historical drilling at the Project.

NevGold CEO, Brandon Bonifacio, comments: “The CSAMT and gravity surveys have transformed our understanding of the structural controls on gold at Nutmeg Mountain. Since completing our 2025 MRE, we have been focused on unlocking the district-scale potential of the Project by completing additional geological layers to refine our future targeting and drilling. This is the exact strategy that yielded immense success for us at Limo Butte over the last 12 months. With this new geological model, we have identified nine new drill targets, including three potential high-grade feeder targets extending well beyond the current MRE boundaries. Nutmeg Mountain already hosts 1.19 Moz (74.2 Mt at 0.50 g/t Au) Indicated and 548 koz Inferred (49.8 Mt at 0.34 g/t Au) of oxide heap-leachable gold that starts at surface. These results show us the structures continue deeper than historical drilling (which averaged just 75 meters depth), and laterally onto untested ground. Drilling these high-quality targets over the next 3-6 months will be a priority as we advance the Project toward a Preliminary Economic Assessment (“PEA”) in 2027. While Limousine Butte remains our flagship priority, adding top-tier personnel to our U.S. technical and operating team has expanded our internal capacity. We are now fully equipped to aggressively advance Limousine Butte while simultaneously unlocking value across our project pipeline, including Nutmeg Mountain (gold, MRE stage) and Zeus (copper porphyry exploration).”

Figure 1 – Target generation from completed CSAMT and gravity surveys. Panel A shows a plan view map of a 200 meter depth slice of apparent resistivity, with dark colors as resistive features. Panel B shows a plan view map of the 3D gravity inversion at a 500 meter depth slice, with grey and pink colors as higher density features. Panel C shows an oblique view of the 3D gravity inversion model, with grey bodies representing higher density features (>0.18 g/cc relative density). All panels show feeder targets (red numbers), near surface targets (black numbers), gold grade shells, and historical drill traces. To view image please click here

Figure 2 – Deposit model for Nutmeg Mountain (low-sulphidation epithermal deposit), adapted after Buchanan (1981) and Corbett & Leach (1997). To view image please click here

Nutmeg Mountain CSAMT Survey
The CSAMT survey comprised 12 lines totaling 38.3 line kilometers (23.8 miles) at a nominal 25-meter (82 ft) spacing, and was conducted by Zonge International of Reno, Nevada. The survey successfully defined major faults lying outside of the current drilling footprint.

The survey was successful at mapping resistivity contrasts, permitting blind geology to be modelled beneath and outboard of the drilled area. Dark colors indicate more resistive rock which could be strong silicification above 200 meters (656 feet), and a possible volcanic basement below. Silicification is a strong proxy for gold mineralization at Nutmeg Mountain (Figure 1, Panel A). The margins of these features are interpreted as fault block boundaries and are the focus of target generation. A steeply dipping, deep-seated fault system beneath the 2025 MRE forms Feeder Targets #1-3 with more than 200 meters (656 feet) of vertical offset in basement volcanic units modelled. Resistive zones along mineralized trends and outside of the historical drilling footprint form Near-Surface Targets #1-6 (Figure 1, Panel A, Panel B, Figure 3). 

Nutmeg Mountain Gravity Survey
The gravity survey covered approximately 18 square kilometers (6.9 square miles) with 819 ground stations at a nominal 150 meter (492 ft.) spacing. The survey and 3D inversion was provided by Zonge International of Reno, NV.

The 3D gravity inversion survey was successful at detecting relative density contrasts that defined geology beneath the MRE. Gray and pink indicate high relative density, interpreted as rock subjected to intense silicification or as basement volcanic packages (Figure 1, Panel B, Panel C). Under either interpretation, these bodies define fault blocks bounding the graben that hosts the Nutmeg Mountain deposit, a setting in which epithermal veins commonly form (Figure 2).

The critical finding, which the Company considers highly significant, is a steeply dipping deep-seated fault system modelled beneath the MRE revealing a body of approximately 700 meters (2,297 feet) wide with a vertical extent of approximately 500 meters (1,640 feet), lying outside the drilling footprint and forming Feeder Targets 1 and 2 (Figure 1, Panel B, Panel C). The margins of high density features are interpreted to be graben bounding structures between high density basement volcanic rocks and low density sediments/tuffs (Figure 4, Figure 5). In low-sulphidation epithermal systems, such boundaries commonly focus silicification and gold deposition (Figure 2).

Exploration Takeaways
The combination of new geological mapping, CSAMT, and gravity inversion has changed how NevGold views the Nutmeg Mountain Gold Project. Drilling to date has defined an oxide, heap-leachable MRE of 1.19 Moz (74.2 Mt at 0.5 g/t Au) Indicated and 548 koz Inferred (49.8 Mt at 0.34 g/t Au) that starts at surface (see 2025 MRE disclosure in Section below), but with an average historical hole depth of less than 75 meters (246 feet). Historical work at the Project has focused on testing the shallowest part of the system.

Two independent geophysical datasets now model structures that lie beneath and beside the MRE. Coincident high-density and high-resistivity zones define a structure extending well below the base of drilling, with more than 200 meters (656 feet) of vertical offset observed in basement volcanic units modelled across the structure (Figure 4, Figure 5). In low-sulphidation epithermal systems, structures of this magnitude and scale are the conduits along which mineralizing fluids ascend, and the zones in which boiling drives gold deposition (Figure 1, Panel C, Figure 2).

Feeder Targets 1 and 2 rank highest, defined by the structural intersection of northwest and north-south trending structures modelled in both CSAMT and gravity surveys (Figure 1, Figure 4, Figure 5). In low-sulphidation epithermal systems, such intersections host potentially higher-grade gold.

Laterally, resistive zones extend the prospective ground well beyond the historically drilled footprint. Approximately 1.6 kilometers (1.0 miles) northeast of the Northern Zone, steeply dipping flow banded rhyolite with a fine-grained black silicified matrix and spherulite development is exposed along the east Weiser River fault. The Pepper Target (near-surface Target 2) also remains undrilled (Figure 3, Figure 4, Figure 5).

Figure 3 – Generalized geological map of Nutmeg Mountain, adapted from DWM-246 (Feeney, 2025).
To view image please click here

Figure 4 – Oblique long section at Nutmeg Mountain highlighting feeder targets. To view image please click here

Figure 5 – Nutmeg Mountain long section (A-A’ looking northwest) showing sinter-capped sediment-volcanic stratigraphy, gold grade shells, gold in drilling (g/t Au) for selected drill holes, and the east Weiser River fault bounding the Pepper Target. To view image please click here

Figure 6 – Map of NevGold’s projects in Idaho and Western USA. To view image please click here

2025 Nutmeg Mountain MRE – Open-Pit, Heap-Leach (see notes below)

Cut-Off Grade
Au g/t
Classification Tonnes Gold Grade
Au g/t
Ounces Gold
1.00 Indicated 5,433,000 1.31 230,000
1.00 Inferred 610,000 1.38 27,000
0.80 Indicated 10,061,000 1.12 362,000
0.80 Inferred 1,297,000 1.12 47,000
0.60 Indicated 19,025,000 0.92 560,000
0.60 Inferred 3,025,000 0.87 85,000
0.50 Indicated 26,353,000 0.81 688,000
0.50 Inferred 5,711,000 0.72 132,000
0.40 Indicated 37,167,000 0.71 844,000
0.40 Inferred 10,496,000 0.59 199,000
0.30 Indicated 52,556,000 0.60 1,014,000
0.30 Inferred 22,458,000 0.46 332,000
0.20 Indicated 74,205,000 0.50 1,186,000
0.20 Inferred 49,749,000 0.34 548,000
0.10 Indicated 95,465,000 0.42 1,294,000
0.10 Inferred 87,406,000 0.26 732,000

Notes:

  1. Effective date of this mineral resource estimate is August 29, 2025.
  2. All mineral resources have been estimated in accordance with Canadian Institute of Mining, Metallurgy and Petroleum definitions, as required under National Instrument 43-101 (“NI 43-101”). The Mineral Resource Statement was prepared by Greg Mosher, P. Geo (Global Mineral Resource Services, “GMRS”) in accordance with NI 43-101.
  3. Mineral Resources reported demonstrate a reasonable prospect of eventual economic extraction through additional exploration, as required under NI 43-101. Mineral Resources are not Mineral Reserves and do not have demonstrated economic viability. There is no certainty that all or any part of the estimated Mineral Resources will be converted into Mineral Reserves. The potential development of the Mineral Resources may be materially affected by environmental, permitting, legal, marketing, and other relevant issues.
  4. Mineral Resources are reported at a cut-off grade of 0.20 g/t Au for an open-pit mining scenario. Cut-off grades are based on a price of US$2350/oz gold, and a number of operating cost and recovery assumptions, including a reasonable contingency factor. Metallurgical recoveries of 80% were used. Densities based on lithology were assigned.
  5. Ounce (troy) = metric tonnes x grade / 31.10348. All numbers have been rounded to reflect the relative accuracy of the estimate.
  6. The quantity and grade of reported Inferred Mineral Resources are uncertain in nature and there has not been sufficient work to define these Inferred Mineral Resources as Indicated or Measured Mineral Resources. It is reasonably expected that many of the Inferred Mineral Resources could be upgraded to Indicated Mineral Resources with continued exploration, however, there is no assurance that further exploration will result in all or any part of the Inferred Mineral Resources being converted into Indicated Mineral Resources.
  7. Tonnages and ounces in the tables are rounded to the nearest thousand and hundred, respectively. Numbers may not total due to rounding.

Qualified Person Statements
Nick Rizopoulos, P.Geo, the Company’s Chief Geologist and Greg French, CPG, the Company’s Vice President, Exploration, each a “Qualified Person” under NI 43-101 have reviewed and approved the scientific and technical information contained in this news release.

ON BEHALF OF THE BOARD

“Signed”

Brandon Bonifacio, President & CEO

For further information, please contact Brandon Bonifacio at bbonifacio@nev-gold.com, call 604-337-5033, or visit our website at www.nev-gold.com.

About the Company
NevGold is dedicated to discovering, de-risking, and rapidly advancing gold and critical metals projects across premier jurisdictions in Nevada and Idaho to drive shareholder value and strengthen US mineral security. The Company holds a 100% interest in the Limousine Butte (gold-antimony) and Cedar Wash (gold) projects in Nevada, and the Nutmeg Mountain (gold) and Zeus (copper) projects in Idaho. For more information, please visit www.nev-gold.com.

Please follow @NevGoldCorp on Twitter, Facebook, LinkedIn, Instagram, and YouTube.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Note Regarding Forward Looking Statements

This news release contains forward-looking statements that are based on the Company’s current expectations and estimates. Forward-looking statements are frequently characterized by words such as “plan”, “expect”, “project”, “intend”, “believe”, “anticipate”, “estimate”, “suggest”, “indicate” and other similar words or statements that certain events or conditions “may” or “will” occur. Forward looking statements in this news release include statements with respect to future exploration potential at Nutmeg Mountain, the Company’s future exploration plans with respect to the Project, the intention to complete an updated MRE and a PEA and the timeline for completion. Such forward-looking statements involve known and unknown risks, uncertainties and other factors that could cause actual events or results to differ materially from estimated or anticipated events or results implied or expressed in such forward-looking statements, which include the dangers inherent in exploration, development and mining activities; the uncertainty of mineral resource estimates; not achieving an updated MRE, a PEA and other exploration goals or estimates; actual exploration or development plans and costs differing materially from the Company’s estimates; obtaining additional financing from time-to-time to continue operations; compliance with government regulation; stock market volatility that may adversely affect the price of the Company’s securities; and the ability to obtain and maintain any necessary permits, consents or authorizations required for mining activities. Any forward-looking statement speaks only as of the date on which it is made and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Forward-looking statements are not guarantees of future performance and accordingly undue reliance should not be put on such statements due to the inherent uncertainty therein.

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.