• Future-Ready Infrastructure: Natively designed for next-gen thermal density and 1.6T lossless networks, supporting long-term capital expenditures.
  • Dual-Track Monetization: Featuring initial deployment of advanced HGX and MGX mixed clusters for AI training and inference.

HONG KONG, Sept. 11, 2026 (GLOBE NEWSWIRE) — 3 E Network Technology Group Limited (Nasdaq: MASK) (the “Company” or “3 E Network”), a business-to-business (“B2B”) information technology (“IT”) business solutions provider, committed to becoming a next-generation artificial intelligence (“AI”) infrastructure solutions provider, today unveiled the core engineering blueprint for its key AI data center in Mikkeli, Finland. The project’s physical infrastructure (civil, mechanical, electrical, and environmental control) is natively designed to provide support for NVIDIA’s next-generation Vera Rubin DSX system-level architecture standards. To support initial commercialization, the Company plans to deploy a mix of HGX- and MGX-based computing clusters during the first phase.

To address increasing power-density requirements as AI models continue to scale, 3 E Network has established an engineering strategy of “forward-looking infrastructure readiness combined with pragmatic computing cluster deployment.” This blueprint addresses a critical industry pain point: the misalignment between facility lifespans (typically 10-15 years) and AI chip iteration cycles (1-2 years). By separating facility infrastructure from compute hardware, the facility aims to help manage long-term total cost of ownership and preserve the value of hardware investments by reducing the cost and disruption of future upgrades.

Reconstructing the Foundation: “Vera Rubin-Ready” to Address High Physical and Thermal Demands

As AI chips evolve toward higher performance, data centers are facing significant challenges in power, cooling, and structural load-bearing. To ensure the Mikkeli facility remains capable through future generational transitions, the project sets rigorous metrics during the civil and Mechanical, Electrical, and Plumbing (“MEP”) stages, aligned with the Vera Rubin architecture:

  • Full-Stack Liquid Cooling and Resilient Piping Networks: Anticipating the application of the Vera CPU and Rubin GPU Superchip, alongside the new HBM4 high-bandwidth memory, single-rack thermal loads are expected to reach levels of tens to over a hundred kilowatts. Consequently, the facility is designed with a direct-to-chip liquid cooling and Coolant Distribution Unit circulation system compatible with blind-mate technology. Leveraging Finland’s natural cooling resources, this architecture is designed to provide adequate cooling redundancy and continuously optimize Power Usage Effectiveness under high loads.
  • 1.6T Scale-out and High-Density Interconnect Infrastructure: Addressing the massive physical volume of intra-rack high-density cabling required by the 6th-generation NVLink, the facility reserves ample rack-level routing space; concurrently, to support the capabilities of the ConnectX-9 architecture, the data center’s backbone fiber cable trays and routing pathways are fully aligned with 1.6T scale-out non-blocking network topologies. The facility reserves wiring space for next-generation Spectrum-X Ethernet and advanced InfiniBand architectures, providing the physical infrastructure required for rack-scale interconnects.
  • High-Capacity Structural Reinforcement & Hybrid Power Architecture: Anticipating the near two-ton weight of liquid-cooled computing racks, the facility implements reinforced flooring designed for high load capacities during the civil engineering phase. In terms of power routing, the facility adopts a flexible dual-track design: it supports the deployment of high-voltage smart PDUs to accommodate standard MGX and HGX nodes, while concurrently providing full forward-compatibility for 48V centralized DC power shelves and rack-level Battery Backup Unit specifications. This design aims to handle the high power density and transient power spikes anticipated with the Vera Rubin architecture, enhancing grid-level stability.
  • Deep Decoupling of MEP Facilities and IT Compute Modules: The design incorporates out-of-band environmental monitoring and micro-leak detection, together with standardized interfaces between facility infrastructure and IT equipment. This approach is intended to reduce the need for modifications to the facility during future compute hardware upgrades and minimize operational disruption.

Dual-Track Commercialization: HGX-Based Training and MGX-Based Inference

While building a high-standard physical foundation, 3 E Network is focused on steadily and efficiently commercializing its computing capacity and developing recurring revenue streams. The planned initial introduction of the HGX and MGX mixed computing architecture is intended to create an elastic compute pool. This dual-track approach corresponds to the two core commercial demands of the AI market, aiming to optimize hardware asset utilization and Return on Investment:

  1. HGX Core Zone (Addressing Large Model Pre-training): This zone is designed to accommodate a high-density deployment of high-performance HGX baseboards. Backed by centralized power and liquid cooling support, this zone is dedicated to providing excellent single-node interconnect bandwidth and rack-scale cluster scalability. The HGX cluster is designed to handle complex, trillion-parameter pre-training tasks of AI enterprises and foundational model developers. Its lossless interconnect significantly mitigates the “data wall” bottleneck, providing efficient compute throughput for training clusters.
  2. MGX Elastic Zone (Addressing Commercial Inference, Vertical Fine-tuning, and Agile Deployment): This zone is designed to accommodate modular clusters based on MGX specifications. By supporting flexible, heterogeneous combinations of CPUs, GPUs, and Data Processing Units, this zone is tailored for a broad spectrum of enterprise needs. As AI enters the application deployment phase, demand for concurrent compute power in Retrieval-Augmented Generation, industry-specific model fine-tuning, and edge computing has grown rapidly. The MGX cluster supports the efficient launch of these tasks with a more agile cost structure, accelerating AI adoption across industry-specific applications while helping 3 E Network capture a wider B2B customer base.

Strategic Perspective and Executive Remarks

Dr. Tingjun Yang, Chief Technology Officer of 3 E Network, stated: “Building modern AI computing infrastructure is a dual test of capital planning and engineering foresight. For the Mikkeli project, we are designing the facility’s physical infrastructure to accommodate the anticipated power, cooling and interconnect requirements of the Vera Rubin architecture and support future hardware upgrades. Our planned initial deployment of HGX- and MGX-based clusters is intended to address demand for model training and inference. Furthermore, relying on Finland’s unique advantages in green energy and natural cooling, we effectively integrate high energy efficiency with computing power. 3 E Network is committed to applying rigorous engineering standards to develop AI data center solutions that balance current commercialization capabilities with future technological scalability for our global partners.”

About 3 E Network Technology Group Limited
3 E Network Technology Group Limited is a business-to-business (“B2B”) information technology (“IT”) business solutions provider committed to becoming a next-generation artificial intelligence (“AI”) infrastructure solutions provider. It upholds the industry consensus of “AI and energy symbiosis” and has a strong vision in the field of energy investment. The Company’s business comprises two main portfolios: the data center operation services portfolio and the software development portfolio. For more information, please visit the Company’s website at https://3emask.com/.

Forward-Looking Statements
Certain statements in this announcement are forward-looking statements. These forward-looking statements involve known and unknown risks and uncertainties and are based on the Company’s current expectations and projections about future events that the Company believes may affect its financial condition, results of operations, business strategy, and financial needs. Investors can identify these forward-looking statements by words or phrases such as “approximates,” “assesses,” “believes,” “hopes,” “expects,” “anticipates,” “estimates,” “projects,” “intends,” “plans,” “will,” “would,” “should,” “could,” “may” or similar expressions. The Company undertakes no obligation to update or revise publicly any forward-looking statements to reflect subsequent events or circumstances, or changes in its expectations, except as may be required by law. Although the Company believes that the expectations expressed in these forward-looking statements are reasonable, it cannot assure you that such expectations will turn out to be correct, and the Company cautions investors that actual results may differ materially from the anticipated results and encourages investors to review other factors that may affect the Company’s future results in the Company’s registration statement and other filings with the U.S. Securities and Exchange Commission.

For more information, please contact:

3 E Network Technology Group Limited
Investor Relations Department
Email: ird@3emask.com
Website: https://3emask.com/

Frøya, 11 September 2026 – Kaldvík AS (“Kaldvík” or the “Company”) has today been granted aquaculture operating licences by the Icelandic Food and Veterinary Authority (MAST) and an environmental operating permit by the Environment and Energy Agency of Iceland (UOS) for salmon farming in Seyðisfjörður, East Iceland.

The operating licences provide for an aggregate maximum allowed biomass (“MAB”) of 10,000 tonnes across the farming sites at Sörlastaðavík, Selstaðavík and Skálanesbót. Of the total MAB, 6,500 tonnes relate to fertile salmon and 3,500 tonnes to sterile salmon.

The new licences increase Kaldvík’s total licensed MAB from 43,800 tonnes to 53,800 tonnes. Of the total licensed MAB, 41,000 tonnes relate to fertile salmon and 12,800 tonnes to sterile salmon.

“Receiving the licences marks an important milestone for Kaldvík and concludes a lengthy licensing process with MAST and UOS. Seyðisfjörður will provide the Group with increased operational flexibility and support its long-term ambition of achieving stable and sustainable production. We will now assess how and when production in Seyðisfjörður can be incorporated into the Group’s overall production plan, taking into account the remaining permitting processes and the Group’s financial priorities,” says Vidar Aspehaug, CEO of Kaldvík.

The timing of development and commencement of farming operations in Seyðisfjörður remains subject to the completion of the remaining permitting processes and the necessary operational preparations. Applications for construction permits for the planned farming installations at Selstaðavík and Sörlastaðavík are currently being processed.

The licences do not affect the Company’s previously communicated harvest guidance for 2026.

For further information, please contact:
Vidar Aspehaug, CEO
+47 913 05 017

Þórunn Ragnarsdóttir, CFO
+354 822 7649

This information contains inside information and is disclosed pursuant to Article 17 of the EU Market Abuse Regulation (MAR), as incorporated into Icelandic law by Act No. 60/2021 on Measures Against Market Abuse, and section 5-12 of the Norwegian Securities Trading Act. The information was disclosed by Jón Kristinn Sverrisson, Compliance Officer, on the date and at the time indicated above.

About Kaldvík AS
Kaldvík is the leading salmon farmer in Iceland. Kaldvík has a well-developed and fully integrated value chain, enabling the Group to provide its customers with a sustainable premium product. Kaldvík is dual-listed on Euronext Growth Oslo and Nasdaq First North Growth Market Iceland. See www.kaldvik.is for more information about the Company.

ALK (ALKB:DC / Nasdaq Copenhagen: ALK B) today announced that the company’s Executive Vice President and CFO, Claus Steensen Sølje, is scheduled to participate in a fireside chat at the Morgan Stanley 24th Annual Global Healthcare Conference in New York City taking place from 14 – 16 September 2026 on Monday, 14 September 2026, at 3.20 PM EDT.

Representatives of the company will be available for meetings at the conference.

ALK-Abelló A/S

For further information, please contact:

Investor Relations: Per Plotnikof, tel. +45 4574 7527, mobile +45 2261 2525

Media: Maiken Riise Andersen, tel. +45 5054 1434

About ALK
ALK is a global specialty pharmaceutical company focused on allergy. ALK’s activities cover the entire value chain of developing, sourcing, producing, and marketing a diversified portfolio of products for diagnosing and treating respiratory allergies and severe allergic reactions (anaphylaxis) in both children and adults.  Headquartered in Denmark, ALK employs around 2,800 people worldwide and is listed on Nasdaq Copenhagen (Nasdaq: ALK B). Visit us at www.alk.net.

Attachment

Trondheim, 11 September 2026

Bente Avnung Landsnes, deputy chair and primary insider of NORBIT ASA has today purchased 1 250 shares in NORBIT at an average price of NOK 159.10 per share. Following the transaction, Landsnes owns 75 323 shares representing 0.1175 per cent of the outstanding shares in NORBIT.

Please see the attached notification for persons discharging managerial responsibilities in NORBIT in accordance with Regulation EU 596/2014 (MAR) article 19.

About NORBIT ASA
NORBIT is a global provider of tailored technology to selected applications, solving challenges and promoting sustainability through innovative solutions, in line with its mission to Explore More. The company is structured in three business segments to address its key markets: Oceans, Connectivity and Product Innovation & Realization. The Oceans segment delivers tailored technology solutions to global maritime markets. The Connectivity segment provides wireless solutions for identification, monitoring and tracking. The Product Innovation & Realization segment offers R&D services, proprietary products, and contract manufacturing to key customers. NORBIT is headquartered in Trondheim with manufacturing in Europe and North America, has around 750 employees, and a worldwide sales and distribution platform.

For more information: www.norbit.com

This information is subject to the disclosure requirements in Regulation EU 596/2014 (MAR) article 19 and the Norwegian Securities Trading Act § 5 -12.

The information was submitted for publication by Elise Heidenreich, Investor Relations at NORBIT ASA, on 11 September 2026 at 13:30 CEST.

Attachment

Luotea Plc
Stock exchange release
11 September 2026 at 2.30 p.m.

Inside information, negative profit warning: Luotea downgrades its outlook for 2026

Luotea downgrades its outlook for adjusted EBITA for 2026.

New outlook for 2026

In 2026 adjusted EBITA is expected to be better than the adjusted EBITA (EUR 7.0 million) in 2025.

Previously published outlook for 2026

In 2026 adjusted EBITA is expected to be better or materially better than the adjusted EBITA (EUR 7.0 million) in 2025.

Reasons for the revision of the outlook

The decline in net sales in the Finnish cleaning and support services business that materialised during the first half of 2026 has continued at the beginning of the second half of the year. The decrease in net sales, driven by intense competition and customers’ cost-saving programmes, has resulted in a decline in adjusted EBITA in the Finnish cleaning and support services business despite the efficiency measures implemented. Profitability in the Swedish business is expected to improve; however, the improvement is not considered sufficient to support the outlook for 2026 previously published by the company.

The company will continue measures to enhance the efficiency of its cost structure in Finland during the remainder of the year. As part of these measures, change negotiations have already been completed, resulting in the termination, or pending termination, of approximately 70 employees. In addition, approximately 100 employees will be temporarily laid off for periods of up to 30 days during the second half of the year.

LUOTEA PLC

Antti Niitynpää
CEO

Further information:
Antti Niitynpää, +358 400 231 167, antti.niitynpaa@luotea.com

Distribution:
Nasdaq Helsinki
Main media
www.luotea.com

Luotea is a pioneer in facility services, offering comprehensive lifecycle solutions for buildings. We combine energy efficiency with innovative thinking to maximise property value and ensure the best conditions for every user. Our services range from advanced property maintenance, building technology and consultancy to professional cleaning and support. We grow sustainably and profitably, mindful of our impact on buildings, the environment and society. Leading the way, we drive our industry forward and shape a better tomorrow. For us, success is measured in trust – the trust our people, clients and owners have in us.

Luotea operates in Finland and Sweden, with 2025 net sales EUR 346 million and a workforce of approximately 5,000. Luotea is publicly listed on Nasdaq Helsinki

VANCOUVER, British Columbia, Sept. 11, 2026 (GLOBE NEWSWIRE) — Hypercharge Networks Corp. (TSXV: HC; OTC: HCNWF; FSE: PB7) (the “Company” or “Hypercharge”), a leading EV charging operator, is pleased to announce that it has entered into a non-binding letter of intent, dated May 27, 2026, with REVS Charging LLC (“REVS”), a Texas-based provider of electric vehicle charging solutions, pursuant to which Hypercharge is proposing to acquire 100% of the equity interests in REVS (the “Proposed Transaction”).

The Proposed Transaction, if completed, would establish Hypercharge’s first US-based operating platform and accelerate the Company’s strategy of consolidating attractively valued EV charging businesses with recurring revenue, long-term contracted customers and meaningful opportunities for operating synergies as the Company scales its operations across North America.

The Proposed Transaction

The Proposed Transaction values REVS on an enterprise basis at approximately US$4,750,000, subject to customary closing adjustments for working capital, indebtedness, and transaction expenses. The purchase price is payable as follows:

  • Closing share consideration with an aggregate value of US$3,000,000, payable in common shares of the Company (the “Common Shares“) at closing, to be issued at a deemed price of C$0.23 per Common Share and subject to a six-month lock-up;
  • Closing cash consideration of US$500,000 payable at closing; and
  • Deferred consideration up to US$1,250,000, payable in Common Shares, in three annual tranches, contingent on REVS meeting gross profit performance milestones of (i) US$850,000 in Year 1, (ii) US$1,200,000 in Year 2, and (iii) US$2,000,000 in Year 3. The Common Shares issuable as deferred consideration will be priced based on the 20-day volume-weighted average trading price of the Common Shares as of the applicable issuance date, subject to a floor price of C$0.23 per Common Share and a ceiling price of C$0.50 per Common Share.

As part of the Proposed Transaction, the Company has agreed to provide REVS with an interim loan of up to US$200,000 (the “Loan“) during the exclusivity period to support REVS’ ongoing operations, repayable to the Company if the Proposed Transaction is not completed. As of the date of this press release, the Company has advanced US$150,000 to REVS under the Loan. REVS must submit a written request for drawdown on the loan with written approval from Hypercharge to advance funds in increments of US$50,000. Should the transaction not be completed or upon termination of the LOI, the loan will become payable within 6 months from the termination date, with interest to accrue at 5% per annum. Upon closing of the transaction, the loan and interest shall be extinguished. The parties have agreed to a 90-day exclusivity period, which may be extended by up to two additional 30-day periods. The parties extended exclusivity until September 30, 2026, as part of this Proposed Transaction.

The Proposed Transaction is subject to the Hypercharge’s board of directors’ approval and will not trigger a change of control for Hypercharge. The Proposed Transaction is classified as a Reviewable Transaction under TSX Venture Exchange (the “TSXV”) policy guidelines. New shares issued as part of this transaction are ~18.1M new shares as part of the closing share consideration with a potential of up to ~7.6M if REVS achieves their GP targets for the deferred consideration, as outlined above.

No finder’s fee is payable and there are no relationships with any non-arm’s length parties pursuant to the Transaction or the Loan.

The parties expect the Proposed Transaction to close in calendar Q3 2026, subject to the satisfaction of customary closing conditions and receiving the requisite TSXV approvals.

About REVS
Refuel Electric Vehicle Solutions (REVS) is a full-service electric vehicle (EV) charging company providing turnkey Level 2 charging solutions for multifamily, condominium, hospitality, and commercial properties across the United States. With deep expertise in commercial real estate and EV infrastructure, REVS helps property owners, managers, and developers plan, finance, install, operate, and manage charging stations, including opportunities for deployment with no upfront capital investment. Learn more: https://www.refuelevs.com/.

About Hypercharge
Hypercharge Networks Corp. (TSXV: HC; OTC: HCNWF; FSE: PB7) is a leading provider of smart electric vehicle (EV) charging solutions for residential and commercial buildings, fleet operations, and other rapidly growing sectors. Driven by its mission to accelerate EV adoption and enable the shift towards a carbon neutral economy, Hypercharge is committed to offering seamless, simple solutions, including industry-leading hardware, innovative and integrated software, and comprehensive services, backed by a robust network of public and private charging stations. Learn more: https://hypercharge.com/.

On behalf of the Company,
Hypercharge Networks Corp.
David Bibby, President & CEO

Contact
Media & Investor Relations:
Kyle Kingsnorth, Head of Marketing
kyle.kingsnorth@hypercharge.com | +1 (888) 320-2633

Forward-Looking Statements
This news release contains forward-looking statements and forward-looking information (collectively, “forward-looking statements”) within the meaning of applicable securities laws. Any statements that are contained in this news release that are not statements of historical fact may be deemed to be forward-looking statements. More particularly and without limitation, this news release contains forward-looking statements regarding anticipated benefits of the acquisition, including the expansion of Hypercharge’s presence in Texas, growth in total ports under management, increased recurring revenue, and Hypercharge’s integration and growth plans in the United States. Forward-looking statements are often identified by terms such as “may”, “could”, “should”, “anticipate”, “will”, “estimates”, “believes”, “intends”, “expects” and similar expressions which are intended to identify forward-looking statements. Forward-looking statements are inherently uncertain, and the actual performance may be affected by a number of material factors, assumptions and expectations, many of which are beyond the control of the Company. Readers are cautioned that assumptions used in the preparation of any forward-looking statements may prove to be incorrect. Events or circumstances may cause actual results to differ materially from those predicted as a result of numerous known and unknown risks, uncertainties and other factors, many of which are beyond the control of the Company. Readers are further cautioned not to place undue reliance on any forward-looking statements, as such information, although considered reasonable by management of the Company at the time of preparation, may prove to be incorrect and actual results may differ materially from those anticipated.

The forward-looking statements contained in this news release are made as of the date of this news release, and are expressly qualified by the foregoing cautionary statement. Except as expressly required by applicable securities law, the Company undertakes no obligation to update publicly or to revise any of the included forward-looking statements, whether as a result of new information, future events or otherwise.

Neither the TSXV nor its Regulation Services Provider (as that term is defined in the policies of the TSXV) accepts responsibility for the adequacy or accuracy of this news release.

MIAMI, Sept. 11, 2026 (GLOBE NEWSWIRE) — Watsco, Inc. (NYSE: WSO) announced today that Barry S. Logan, Executive Vice President, and Rick Gomez, Vice President, are scheduled to present at the 14th Annual Morgan Stanley Laguna Conference being held at the Ritz Carlton, Laguna Niguel on Wednesday, September 16, 2025 at 4:05 p.m. (PDT). Internet users can listen to a live webcast of the presentation at the Investor Relations section of Watsco’s website at http://www.watsco.com.

About Watsco

Watsco is the largest distributor in the highly fragmented North American HVAC/R market. Watsco’s solid financial position and culture of innovation has enabled investments in long-term growth, including the Company’s industry-leading technology platforms. Today, more than 70,000 contractors, installers and technicians engage digitally with the Company, resulting in improved growth and lower attrition. The Company is now advancing AI-driven initiatives to leverage its extensive data assets to enhance the customer experience and improve efficiencies. These investments position Watsco to capture market share as contractors increasingly adopt digital tools and incorporate data-driven solutions in their businesses.

This document includes certain “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements may address, among other things, our expected financial and operational results and the related assumptions underlying our expected results. These forward-looking statements are distinguished by use of words such as “will,” “would,” “anticipate,” “expect,” “believe,” “designed,” “plan,” or “intend,” the negative of these terms, and similar references to future periods. These statements are based on management’s current expectations and are subject to uncertainty and changes in circumstances. Actual results may differ materially from these expectations due to changes in economic, business, competitive market, new housing starts and completions, capital spending in commercial construction, consumer spending and debt levels, regulatory and other factors, including, without limitation, the effects of supplier concentration, competitive conditions within Watsco’s industry, the seasonal nature of sales of Watsco’s products, the ability of the Company to expand its business, insurance coverage risks and final GAAP adjustments. Detailed information about these factors and additional important factors can be found in the documents that Watsco files with the Securities and Exchange Commission, such as Form 10-K, Form 10-Q and Form 8-K. Forward-looking statements speak only as of the date the statements were made. Watsco assumes no obligation to update forward-looking information to reflect actual results, changes in assumptions or changes in other factors affecting forward-looking information, except as required by applicable law.

Barry S. Logan
Executive Vice President
(305) 714-4102
e-mail: blogan@watsco.com

First Drill Hole Spudded in August as Company Advances 25-Hole, Approximately 1,000-Metre Program Focused on Historical Verification and Metallurgical Testwork

VANCOUVER, British Columbia, Sept. 11, 2026 (GLOBE NEWSWIRE) — Union Power Metals Corporation (CSE: UPPR) (OTCQB: UPR) (FSE: UPERF) (“Union Power” or the “Company”) is pleased to provide an update on its maiden drill program at the Michalová manganese project in central Slovakia.

The Company spudded the first hole of the program in August and is advancing a planned 25-hole, approximately 1,000-metre drill campaign designed to verify historical geological information and generate fresh material for metallurgical testing.

The program represents an important step in Union Power’s technical evaluation of Michalová, combining modern drilling and analytical work with the extensive body of historical exploration data compiled by the Company from Slovak state archives.

Michalová Drill Program (Figure 1)

The current program has been designed around two principal objectives:

Verification of Historical Drilling

Twin holes are being drilled adjacent to selected historical drill collars to provide a direct comparison between new drilling results and historical information contained in archival records held by the Slovak State Geological Institute (ŠGÚDŠ).

The Company considers consistency between the new drilling and historical results to be an important initial technical objective of the program. If current drilling demonstrates reasonable correlation with the historical geological information, it would provide additional confidence in the extensive archival dataset as Union Power determines the appropriate next steps for the project.

Metallurgical Testwork

In parallel with drilling, the Company is assembling representative metallurgical composites from the oxide and carbonate manganese mineralization at Michalová.

These samples are intended for metallurgical testwork designed to evaluate the characteristics of the mineralization and its potential suitability for processing toward high-purity, battery-grade manganese products.

By advancing metallurgical work alongside geological verification, Union Power intends to begin evaluating both the physical scale and characteristics of the mineralization and its potential processing pathway at an early stage of the project.

The Company expects to provide further updates as drilling progresses and analytical and metallurgical results become available.

“What we are chasing at Michalová is a question Europe has not been able to answer for itself: whether a manganese deposit on this continent can be taken all the way to battery grade,” said Derrick Dao, Chief Executive Officer of Union Power Metals.

“We are drilling to verify the historical work and running metallurgical testwork in parallel, rather than sequentially, because tonnes and grade alone will not tell us whether this deposit has a place in a cathode supply chain. The answer ultimately comes out of the laboratory.

“For this first drill program, one of the most important things we want to establish is whether our modern drilling tracks what the historical drilling told us. If we can demonstrate that correlation while simultaneously beginning to understand the metallurgical characteristics of the mineralization, we will have taken an important step forward in evaluating Michalová.

“That is genuinely exciting to me. Europe currently has no integrated mine-to-battery-grade manganese producer, and determining whether Michalová has the potential to contribute to a future European manganese supply chain is the reason we are here.”

Figure 1 – Micholva Drill Plan

Figure 1 – Michalová Drill Plan

About the Michalová Project

The Michalová oxide and manganese carbonate deposit is located in the Banská Bystrica Region of central Slovakia, within a European Union member state and inside the customs union serving the region’s battery and steel supply chains.

The project was the subject of extensive state-funded exploration during the Czechoslovak era, and the Company has compiled and translated corresponding archival records held by GEOFOND.

Union Power’s current work program is designed to apply modern exploration, analytical and metallurgical methods to the historical geological information as the Company evaluates the project’s potential.

Manganese is designated a strategic raw material under the European Union’s Critical Raw Materials Act. High-purity manganese sulphate monohydrate is an important manganese product used in certain lithium-ion battery cathode chemistries.

Union Power is evaluating whether mineralization at Michalová may ultimately be suitable for processing toward a high-purity manganese product. No determination regarding economic viability or the ability to produce battery-grade manganese has been made, and further drilling, analytical, metallurgical and technical work is required.

Qualified Person

The scientific and technical information contained in this news release has been reviewed and approved by Lorne Warner, P.Geo., a Qualified Person as defined by National Instrument 43-101 – Standards of Disclosure for Mineral Projects.

Mr. Warner has reviewed and approved the scientific and technical information contained in this news release.

About Union Power Metals Corporation

Union Power Metals Corporation is a mineral exploration company focused on advancing high-potential manganese projects in Slovakia, while maintaining exposure to uranium assets in Botswana. The Company is committed to responsible development and long-term value creation through the advancement of critical minerals important to evolving global energy and industrial supply chains.

ON BEHALF OF THE BOARD OF DIRECTORS

Derrick Dao
Chief Executive Officer
Union Power Metals Corporation

For more information, please contact:

Derrick Dao
Chief Executive Officer
info@unionpowermetals.com
+1 825 558 3828

Carrie Howes
Investor Relations
carrie@unionpowermetals.com
+1 647 725 9639

Neither the Canadian Securities Exchange nor its Market Regulator (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release.

Cautionary Statement Regarding Forward-Looking Information

This news release contains statements which constitute “forward-looking information” within the meaning of applicable securities laws, including statements regarding the Company’s planned drill program at Michalová; the anticipated number and metres of drill holes; the objectives and potential results of twin-hole drilling; the potential correlation between current and historical drilling; planned analytical and metallurgical testwork; the assembly and testing of oxide and carbonate composites; the potential suitability of mineralization for processing toward high-purity or battery-grade manganese products; the potential of the Michalová Project; and the possible role of the project in European manganese and battery supply chains.

Forward-looking information is often identified by words such as “may”, “would”, “could”, “should”, “will”, “intend”, “plan”, “anticipate”, “believe”, “estimate”, “expect”, “potential” or similar expressions.

Such forward-looking statements are based on assumptions considered reasonable by management as of the date hereof, including the Company’s ability to complete the planned exploration program, obtain meaningful analytical and metallurgical results, access required personnel and services, maintain its mineral rights and obtain adequate financing to advance its projects.

Forward-looking information involves known and unknown risks, uncertainties and other factors that may cause actual results, performance or achievements to differ materially from those expressed or implied by such information. These risks include, without limitation, risks associated with mineral exploration and development; the possibility that current drilling may not correlate with historical results; the possibility that metallurgical testwork may not demonstrate a viable pathway to high-purity or battery-grade manganese products; availability of financing; commodity prices; regulatory and permitting matters; general market and economic conditions; and other risks inherent in the mineral exploration industry.

There can be no assurance that the planned exploration or metallurgical programs will produce the results anticipated by the Company or that the Michalová Project will ultimately support an economically viable mineral operation or the production of battery-grade manganese.

Forward-looking information contained herein represents management’s best judgment based on information currently available. Readers are cautioned not to place undue reliance on forward-looking information. The Company undertakes no obligation to update or revise forward-looking statements as a result of new information, future events or otherwise, except as required by applicable law.

A photo accompanying this announcement is available at https://www.globenewswire.com/NewsRoom/AttachmentNg/ff5b5dd0-9684-4c9e-aea0-b03b9273f000

8.3

PUBLIC OPENING POSITION DISCLOSURE/DEALING DISCLOSURE BY
A PERSON WITH INTERESTS IN RELEVANT SECURITIES REPRESENTING 1% OR MORE
Rule 8.3 of the Takeover Code (the “Code”)

1.        KEY INFORMATION

(a)   Full name of discloser: Rathbones Group Plc
(b)   Owner or controller of interests and short positions disclosed, if different from 1(a):
        The naming of nominee or vehicle companies is insufficient. For a trust, the trustee(s), settlor and beneficiaries must be named.
 
(c)   Name of offeror/offeree in relation to whose relevant securities this form relates:
        Use a separate form for each offeror/offeree
NextEnergy Solar Fund Ltd
(d)   If an exempt fund manager connected with an offeror/offeree, state this and specify identity of offeror/offeree:  
(e)   Date position held/dealing undertaken:
        For an opening position disclosure, state the latest practicable date prior to the disclosure
10/09/2026
(f)   In addition to the company in 1(c) above, is the discloser making disclosures in respect of any other party to the offer?
        If it is a cash offer or possible cash offer, state “N/A”
No

2.        POSITIONS OF THE PERSON MAKING THE DISCLOSURE

If there are positions or rights to subscribe to disclose in more than one class of relevant securities of the offeror or offeree named in 1(c), copy table 2(a) or (b) (as appropriate) for each additional class of relevant security.

(a)      Interests and short positions in the relevant securities of the offeror or offeree to which the disclosure relates following the dealing (if any)

Class of relevant security:

Ordinary NPV
  Interests Short positions
  Number % Number %
(1)   Relevant securities owned and/or controlled: 5,966,409 1.03%    
(2)   Cash-settled derivatives:

       
(3)   Stock-settled derivatives (including options) and agreements to purchase/sell:        

        TOTAL:

5,966,409 1.03%    

All interests and all short positions should be disclosed.

Details of any open stock-settled derivative positions (including traded options), or agreements to purchase or sell relevant securities, should be given on a Supplemental Form 8 (Open Positions).

(b)      Rights to subscribe for new securities (including directors’ and other employee options)

Class of relevant security in relation to which subscription right exists:  
Details, including nature of the rights concerned and relevant percentages:  

3.        DEALINGS (IF ANY) BY THE PERSON MAKING THE DISCLOSURE

Where there have been dealings in more than one class of relevant securities of the offeror or offeree named in 1(c), copy table 3(a), (b), (c) or (d) (as appropriate) for each additional class of relevant security dealt in.

The currency of all prices and other monetary amounts should be stated.

(a)        Purchases and sales

Class of relevant security Purchase/sale

Number of securities Price per unit
Ordinary NPV Sale 30,000 49.8182p

(b)        Cash-settled derivative transactions

Class of relevant security Product description
e.g. CFD
Nature of dealing
e.g. opening/closing a long/short position, increasing/reducing a long/short position
Number of reference securities Price per unit
         

(c)        Stock-settled derivative transactions (including options)

(i)        Writing, selling, purchasing or varying

Class of relevant security Product description e.g. call option Writing, purchasing, selling, varying etc. Number of securities to which option relates Exercise price per unit Type
e.g. American, European etc.
Expiry date Option money paid/ received per unit
               

(ii)        Exercise

Class of relevant security Product description
e.g. call option
Exercising/ exercised against Number of securities Exercise price per unit
         

(d)        Other dealings (including subscribing for new securities)

Class of relevant security Nature of dealing
e.g. subscription, conversion
Details Price per unit (if applicable)
Ordinary NPV      

4.        OTHER INFORMATION

(a)        Indemnity and other dealing arrangements

Details of any indemnity or option arrangement, or any agreement or understanding, formal or informal, relating to relevant securities which may be an inducement to deal or refrain from dealing entered into by the person making the disclosure and any party to the offer or any person acting in concert with a party to the offer:
Irrevocable commitments and letters of intent should not be included. If there are no such agreements, arrangements or understandings, state “none”
None

(b)        Agreements, arrangements or understandings relating to options or derivatives

Details of any agreement, arrangement or understanding, formal or informal, between the person making the disclosure and any other person relating to:
(i)   the voting rights of any relevant securities under any option; or
(ii)   the voting rights or future acquisition or disposal of any relevant securities to which any derivative is referenced:
If there are no such agreements, arrangements or understandings, state “none”
None

(c)        Attachments

Is a Supplemental Form 8 (Open Positions) attached? No

Date of disclosure: 11/09/2026
Contact name: Callum Ridley – Compliance Department
Telephone number: 0151 243 7037

Public disclosures under Rule 8 of the Code must be made to a Regulatory Information Service.

The Panel’s Market Surveillance Unit is available for consultation in relation to the Code’s disclosure requirements on +44 (0)20 7638 0129.

The Code can be viewed on the Panel’s website at.

The Pioneer in Clean Nail Care is Coming to One of Fairfield County’s Most Anticipated New Destinations

DARIEN, CT, Sept. 11, 2026 (GLOBE NEWSWIRE) — MiniLuxe Holding Corp. (“MiniLuxe” or the “Company”), a purpose-driven beauty and self-care brand redefining the nail and waxing experience through clean products, ethical and empowering employment practices, and elevated service standards, today announced that their Strategic Growth Partner Vera Vos-Lexmond has signed a lease for the brand’s first Connecticut location within The Corbin District in downtown Darien. The studio is the first of multiple locations Vos Lexmond has committed to developing across Fairfield County, CT with an opening targeted for early 2027.

Developed by Baywater Properties on seven acres in the heart of downtown Darien, The Corbin District is reimagining the center of town with top culinary talent, high-end boutiques, luxury residential units, and office spaces arranged around a vibrant new town square. Among its confirmed tenants are consulting firm McKinsey & Co., Aon Financial Services, Yoga Spark, Barry’s Bootcamp, Rhone, Millie’s Restaurant from Nantucket, Connecticut’s first Tatte Bakery & Café, and Corsica, a new restaurant from the team behind Barcelona Wine Bar. The Corbin District’s development team has been highly selective in its leasing strategy, seeking out businesses that align with Darien and Fairfield County’s lifestyle, demographics, and long-term growth. For developer David Genovese, MiniLuxe represents exactly the kind of tenant that vision was designed to attract where experience, as much as convenience, matters.

MiniLuxe was founded on the conviction that the nail salon industry was overdue for a fundamental reinvention and a purpose anchored in providing empowerment and joy to its team, clients and communities. MiniLuxe’s studios use only better-for-you, non-toxic products, maintain rigorous hygiene and sterilization protocols, and invest in training and fairly compensating the nail artists who deliver the experience. Since its founding, the company has paid more than $200M in fair wages to its designers with over half holding equity options in the business.

“MiniLuxe and The Corbin District share the same north star,” said David Genovese, CEO of Baywater Properties and developer of The Corbin District. “We are both committed to bringing something genuinely better to Darien. When we set out to build this district, our goal was to create a walkable, beautiful downtown destination with tenants that reflect the community’s standards and aspirations. MiniLuxe is exactly the kind of brand we had in mind, and we are proud to welcome them as part of what we are building here together.”

The Darien announcement also marks a strategic milestone in MiniLuxe’s national franchise and joint venture (JV) expansion. With over 25 opened studios and strong inbound franchise interest since its program’s launch, MiniLuxe is building a model that scales without compromising the standards that make it distinctive. Connecticut, positioned as a natural bridge between MiniLuxe’s New England base and the New York metropolitan market, is expected to become one of the brand’s most significant growth territories.

“Connecticut has always been central to our growth vision,” said Tony Tjan, Co-Founder and CEO of MiniLuxe. “Fairfield County reflects the same customer sophistication and values-driven consumer that helped us build a loyal following across New England. Opening inside The Corbin District gives us the ideal platform to introduce MiniLuxe to Connecticut in a setting that shares our commitment to quality, community, and intentional design. We are building something much larger here, and Darien is where that next chapter begins.”

“I fell in love with MiniLuxe because it stands for everything I believe beauty should be,” said Vera Vos-Lexmond, “high standards, real transparency, and a genuine commitment to the people doing the work. Fairfield County is my home, and I wanted to bring a brand here that my community would be proud to have. The Corbin District is exactly the kind of environment where MiniLuxe belongs, surrounded by great food, thoughtful retail, and neighbors who care deeply about quality. I cannot wait to open our doors.”

MiniLuxe remains actively in conversation with prospective franchise partners across key metropolitan corridors and welcomes inquiries from qualified operators interested in joining its growing network. Consumers eager to be among the first to experience MiniLuxe in Connecticut can follow updates at miniluxe.com and on social media.

About MiniLuxe

MiniLuxe Holding Corp. is a Boston-based lifestyle brand and talent empowerment platform transforming the fragmented beauty and self-care industry through its premium service brand, proprietary products, and operating platform. For more than 15 years, MiniLuxe has delivered high-quality nail care, waxing, and esthetic services through a growing network of company-owned, joint venture, and partner-operated studios, completing more than 5 million services to date.

The Company is recognized for its elevated service experience, rigorous hygiene standards, non-toxic products, modern studio design, and commitment to socially responsible labor practices. MiniLuxe’s differentiated model is designed to create better outcomes for both clients and beauty professionals through career development, economic mobility, equity participation, and future ownership opportunities.

MiniLuxe is expanding its reach through a multi-pronged growth strategy that includes new studio development, franchising, and the acquisition and conversion of existing nail salons. By combining a trusted consumer brand, proprietary products, operating expertise, and technology-enabled systems, the Company offers entrepreneurs and operators the opportunity to partner with a proven platform while preserving a strong focus on talent development and service excellence.

Through its growing studio network and product portfolio, MiniLuxe seeks to build the leading trusted brand in beauty and self-care while generating long-term value for clients, talent, and shareholders.

Media Contact
MiniLuxe Marketing & Communications
cmastrangelo@miniluxe.com
www.miniluxe.com

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.