Platform uses silicon wafer itself as the package and introduces a highly integrated approach to power system design across automotive, industrial, and AI data center markets

onsemi Embedded Power Platform Chip

onsemi Embedded Power Platform Chip
onsemi Embedded Power Platform Chip

onsemi Embedded Power Platform Wafer

onsemi Embedded Power Platform Wafer
onsemi Embedded Power Platform Wafer

Summary: onsemi today unveiled the Embedded Power Platform (EPP), redefining system power delivery through unprecedented power density and integration of multiple dies into a single silicon device. By jointly optimizing electrical, mechanical and thermal performance within a single architecture, EPP enables up to 3 – 5x higher power density compared with current solutions with a highly integrated approach to power system design. This helps customers reduce complexity while scaling for the increasing demands of AI infrastructure and electrification.

SCOTTSDALE, Ariz., Sept. 16, 2026 (GLOBE NEWSWIRE) — onsemi today unveiled the Embedded Power Platform (EPP), a breakthrough architecture that uses the silicon wafer itself as the foundation of the package and introduces a highly integrated approach to power system design. Designed as a scalable platform, EPP brings electrical, mechanical and thermal design together from the outset to help customers achieve higher power density, improve system performance and accelerate development in AI, electrification and autonomous applications.

“For decades, the semiconductor and the package have been treated as separate technologies. EPP changes that by making the silicon itself part of the system architecture,” said Hassane El-Khoury, President and CEO of onsemi. “EPP brings together advanced semiconductor technologies, manufacturing and system-level optimization into a common architecture that can evolve alongside future innovations. This approach can redefine how power systems are built and create a new foundation for AI infrastructure, electrification and automation.”

What’s New: EPP reimagines the package from passive housing into an active contributor to system performance. By using the silicon wafer itself as the package, EPP enables the seamless integration and interconnection of silicon, silicon carbide (SiC) and gallium nitride (GaN) technologies within a highly integrated wafer-level architecture. Multiple devices, including FETs, drivers and controllers, can be embedded together in a single package and co-optimized for electrical, thermal and mechanical performance. This enables complete power-system co-design, allowing electrical, thermal and mechanical characteristics to be evaluated and optimized together from day one. The result is higher power density, improved system performance, reduced development complexity and faster time-to-market.

EPP also leverages onsemi’s standard 12-inch silicon wafer manufacturing capabilities, bringing key integration processes into the precision and control of the semiconductor fab. This applies mature semiconductor design tools, wafer-level manufacturing and advanced simulation capabilities to power-system integration, helping improve performance while accelerating innovation.

Subaru Corporation is one of the first early engagement partners for EPP, working with onsemi to evaluate how the platform could support future electrified vehicle architectures. Through the collaboration, Subaru will gain early access to engineering samples, simulation models and technical expertise as the companies explore opportunities to improve vehicle performance, streamline development and accelerate innovation.

Why It Matters: AI infrastructure, electrified transportation, industrial automation are all competing for the same critical resource: power. Customers need to move and manage more electricity within increasingly compact systems while controlling heat, efficiency, cost and development time. Yet many of today’s power systems are still developed using traditional design approaches that treat power electronics, mechanical design and thermal design as separate engineering challenges, with each layer optimized independently and sequentially. Decisions made at one stage can create compromises in another, leading to additional engineering iterations, costly late-stage changes and longer development cycles.

EPP replaces that sequential model with a common platform that can be co-designed, co-simulated and co-optimized. This approach is designed to help customers:

    • Achieve 3 – 5x higher power density, depending on the application
    • Accelerate development cycles to as little as four months
    • Improve thermal performance and heat dissipation
    • Reduce electrical losses through lower parasitic inductance
    • Enable greater device control and higher switching frequencies
    • Identify design trade-offs earlier and reduce costly late-stage changes
    • Scale a common architecture across power levels, device types, applications semiconductor technologies
  • AI Infrastructure Applications: As AI rack power increases, more space and cooling capacity must be dedicated to the systems that deliver, convert and protect that power. This can limit how much compute capacity can fit within a rack. In an early EPP-based solid-state circuit-breaker design, the solution was approximately 50% smaller and 20% cooler than existing designs. By reducing packaging overhead and using the full EPP footprint to conduct heat, EPP can support more compact power systems, improve thermal management and enable greater power density in AI infrastructure.
  • Electric Vehicle Applications: Electric vehicle traction inverters are often constrained by efficiency losses, thermal limitations, development complexity and system size. EPP addresses these challenges with up to 4x higher power density and 15% lower power losses compared to conventional approaches, enabling smaller, lighter and more efficient inverter designs. Its scalable architecture supports a single inverter platform spanning low-end to high-end vehicle applications, allowing automakers to reuse a common design across multiple vehicle models and power classes. This approach can reduce R&D and manufacturing costs, accelerate qualification and development cycles, improve vehicle range or lower system costs, and help bring new vehicle programs to market faster.

The AI era is creating new infrastructure challenges that cannot be solved by computing power alone. As power becomes one of the defining constraints on future innovation, EPP represents a fundamentally new approach to how energy is delivered, managed and optimized. By turning the silicon wafer into the package itself, onsemi is establishing a foundation for the next generation of AI, electrification and autonomous systems.

Availability: EPP is expected to begin sampling in 2026 with strategic customers and ecosystem participants across automotive and AI applications.

More Information:

About Embedded Power Platform:

About onsemi

onsemi (Nasdaq: ON) delivers intelligent power and sensing technologies that enable electrification, energy efficiency, safety, and automation across automotive, industrial, and AI data center end-markets. With a highly differentiated and innovative product portfolio, onsemi helps customers solve complex challenges to achieve higher efficiency, improved performance, and lower system cost, while supporting a safer, cleaner, and more energy-efficient world. onsemi is part of the S&P 500® index. Learn more about onsemi at www.onsemi.com.

onsemi and the onsemi logo are trademarks of Semiconductor Components Industries, LLC. All other brand and product names appearing in this document are registered trademarks or trademarks of their respective holders.

Contacts
        
Krystal Heaton
Director, Head of Public Relations
onsemi
(480) 242-6943
Krystal.Heaton@onsemi.com

Photos accompanying this announcement are available at: 
https://www.globenewswire.com/NewsRoom/AttachmentNg/493dcb4e-d494-476b-b82f-8744b69b9479

https://www.globenewswire.com/NewsRoom/AttachmentNg/45506b9c-a7fa-4412-ac06-3fd4480375f3 

Project would expand transmission capacity between Maine and New Hampshire, improve reliability, and deliver significant regional economic benefits

MANCHESTER, N.H., Sept. 16, 2026 (GLOBE NEWSWIRE) — Eversource today announced ISO New England’s (ISO-NE) selection of the company’s joint Transmission Initiative Down East (TIDE) project as the preferred longer-term transmission solution to meet regional needs outlined by ISO-NE in its competitive transmission solicitation process. The proposed TIDE project will enhance reliability for customers and enable new energy supply sources in northern New England – easing congestion on the regional transmission system and helping to address affordability.

Through ISO-NE’s competitive bid process, TIDE emerged as the strongest overall and most cost-effective solution to meet the region’s energy needs with significant customer benefits – including expanded system capacity, reduced congestion costs, enhanced reliability and the ability to integrate to the regional grid up to 1,200 megawatts of future onshore wind generation in northern New England. The proposed project still requires extensive engineering, environmental, permitting and regulatory reviews, with construction anticipated to begin in 2029 pending all state and regulatory approvals.

“This selection is an important step toward delivering the modern, reliable transmission infrastructure New England needs while enabling new supply resources that are so critical to addressing our region’s longstanding energy affordability challenges,” said Bill Quinlan, President of Transmission at Eversource. “Transmission solutions like this project can help improve affordability for customers across New Hampshire and all of New England by enabling greater supply capacity and easing congestion costs while also ensuring customers have the highly reliable service they demand. We look forward to further engagement with our communities, ISO New England and other stakeholders to bring these benefits to the region.”

According to ISO New England’s analysis, TIDE is projected to provide substantial regional benefits at a more than 2-to-1 cost-benefit ratio, including:

  • $1.42 billion in production cost and congestion savings
  • $1.30 billion in avoided capital investment
  • $694 million in avoided transmission investment, which ultimately equates to significant savings for customers

Eversource’s portion of the TIDE project will primarily involve upgrades and replacement of infrastructure entirely within existing rights-of-way in New Hampshire, with additional work in Maine and Massachusetts. In New Hampshire, the project includes a new 18-mile, 345 kilovolt (kV) line, a rebuild of one of the existing 345 kV lines from a two-pole, H-frame design to a single-pole, reconductoring one of the existing 345 kV lines and installation of equipment to help regulate voltage and power quality. The project is designed to maximize the use of established transmission rights-of-way and existing infrastructure, which minimizes environmental and community impacts while efficiently delivering capacity, strengthening the grid, and relieving energy bottlenecks for the entire region.

To learn more about the Transmission Initiative Down East (TIDE) project, visit Eversource’s website.

Eversource (NYSE: ES), celebrated as a national leader for its commitment to sustainability and corporate citizenship, is named among America’s Most Responsible Companies by Newsweek for 2026 and recognized as the #1 utility on USA Today’s list of America’s Climate Leaders for 2025. Eversource is New Hampshire’s largest electric utility, serving nearly 549,000 homes and businesses in 206 cities and towns. Eversource is proud to be recognized as the #1 contributor to United Way in New Hampshire. Eversource harnesses the commitment of more than 10,300 employees across three states to build a single, united company around the mission of safely delivering reliable energy with superior customer service. The #1 Energy Efficiency Provider in the Nation, the company is empowering a clean energy future in the Northeast, with nationally recognized energy efficiency solutions and successful programs to integrate new clean energy resources like a first-in-the-nation networked geothermal pilot project, solar, offshore wind, electric vehicles and battery storage, into the electric system. For more information, please visit eversource.com, and follow us on X, Facebook, Instagram, and LinkedIn.

CONTACT:

Media Contact:
William Hinkle
603-634-2228
william.hinkle@eversource.com

Investor Relations Contact:
Rima Hyder
781-441-8882
rima.hyder@eversource.com

CALGARY, Alberta, Sept. 16, 2026 (GLOBE NEWSWIRE) — Cielo Waste Solutions Corp. (TSXV: CMC; OTCQB: CWSFF) (“Cielo” or the “Company”) is pleased to announce the appointment of Harry Andersen to the Company’s board of directors (the “Board”) and as Chair of the Board, effective September 15, 2026. Sheila A. Leggett has stepped down as Chair to facilitate the transition and will continue to serve as a director and as Chair of the Board’s newly formed Governance, Nominating and Compensation Committee. Larry Schafran has resigned from the Board and will continue to support the Company as an advisor to the Board. The Board thanks Mr. Schafran for his service and contributions to Cielo and is pleased to retain the benefit of his counsel in an advisory capacity.

Cielo’s Strategy

Cielo is a clean fuels and low-carbon infrastructure project developer. Cielo originates, structures and finances projects by securing feedstock and offtake, deploying proven third-party technologies and integrating carbon management such as Carbon Capture and Storage (CCS). The Company is also committed to cultivating meaningful strategic and Indigenous partnerships that bring local knowledge, expertise, and participation to the development of projects while creating shared economic benefits. Cielo is using and developing a platform capable of advancing multiple sites in parallel, anchored by Project Nahoonai, as further described in the Company’s continuous disclosure materials.

A Board and Management Team Aligned with the Strategy

Today’s changes continue the deliberate build-out of a leadership group matched to that strategy, with direct experience in major project development and execution, project finance, carbon capture and storage, regulatory and Indigenous engagement, risk management, and public company governance.

Mr. Andersen has more than 25 years of senior leadership experience in the midstream and energy sectors, with expertise spanning operations, business development, capital markets, mergers and acquisitions, major project development and execution, commercial and customer offtake arrangements, corporate governance and regulatory and stakeholder matters. He previously served as Chief Operating Officer and Senior Vice President of Pembina Pipeline Corporation, where he oversaw the company’s Pipeline Division and its pipeline transportation, terminalling, storage and rail operations across Canada and the United States. He also served as Pembina’s Chief Legal Officer and Senior Vice President, External Affairs, overseeing major project engineering and construction, legal, regulatory, government, environmental, Indigenous and community affairs functions and advising senior management and the Board. Mr. Andersen also led the development of the proposed US$10 billion Jordan Cove LNG project and an Indigenous partnership related to the Trans Mountain pipeline and expansion. Most recently, he was the founder and Chief Executive Officer of Captus Generation, where he led the development of a large-scale, co-located behind-the-meter power and data centre campus.

Mr. Andersen joins a Board that includes Ms. Leggett, a governance and strategic resource leader; Kaush Rakhit, a senior energy-based business leader who has built numerous successful Canadian energy companies; Peter MacKay, who provides invaluable guidance on government, public services, industry practice and economic development; and Ryan C. Jackson, Chief Executive Officer.

The renewed Board follows Cielo’s recent additions to its executive team: Ivy Chan as Chief Financial Officer, Robert Pockar as Chief Operating Officer and Matthew Scorah as Chief Development Officer. Together, they bring the multidisciplinary expertise required to develop and advance large-scale capital projects, spanning engineering and technical development, regulatory and permitting, project management, commercial negotiations and contracting, feedstock and offtake development, project finance and capital markets. With hands-on experience across the energy and CCS industries, the team has the capabilities to identify, structure, de-risk and advance projects from early-stage development through to investment and execution.

“I joined Cielo because of its people,” said Mr. Andersen. “The Company has a clear strategy, a management team with experience that is genuinely hard to find, and a Board that can help it execute. We are building a business, not a single project, and I look forward to working with Ryan, the team and my fellow directors to advance it.”

“Harry brings the major project, capital markets, commercial and Indigenous partnership experience that matches where Cielo is headed,” said Ryan C. Jackson, Chief Executive Officer. “With Ivy, Rob and Matt on the executive team and a renewed Board, we are confident we have the complete team in place to execute our strategy. On behalf of the Company, I thank Sheila for her leadership as Chair through a period of significant change, and Larry for his years of service.”

ABOUT CIELO

Cielo Waste Solutions Corp. is a clean fuels project development company advancing sustainable aviation fuel and other low-carbon energy projects across North America. Cielo combines strategic feedstock partnerships with proven third-party technologies to develop a scalable pipeline of waste-to-fuels projects, anchored by its flagship Project Nahoonai in Prince George, British Columbia.

Cielo’s shares are listed on the TSX Venture Exchange under the symbol CMC and on the OTCQB under the symbol CWSFF.

For further information, please contact:
Cielo Investor Relations
Ryan C. Jackson, Chief Executive Officer
Phone: (403) 348-2972
Email: investors@cielows.com

CAUTIONARY NOTE REGARDING FORWARD-LOOKING STATEMENTS

This news release may contain certain forward-looking statements and forward-looking information within the meaning of applicable Canadian securities laws. All statements other than statements of present or historical fact are forward-looking statements. Forward-looking statements in this news release include, but are not limited to, statements regarding the anticipated contributions and benefits of Mr. Andersen’s appointment and Mr. Schafran’s advisory role, the composition and expected contributions of the Board, and the Company’s leadership team, and the Company’s business strategy, including the development of a portfolio of waste-to-fuels projects, the advancement of multiple sites and the Company’s project pipeline.

Forward-looking statements are subject to known and unknown risks, uncertainties, assumptions and other factors, many of which are beyond the control of Cielo, that may cause actual results, performance or achievements of the Company to differ materially from those expressed or implied by such forward-looking statements. Any forward-looking statements are made as of the date hereof and, except as required by law, the Company assumes no obligation to publicly update or revise such statements to reflect new information, subsequent events or otherwise.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as such term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this news release.

New model home to debut this Saturday, Sept 19 at exclusive community

CORONA, Calif., Sept. 16, 2026 (GLOBE NEWSWIRE) — Toll Brothers, Inc. (NYSE:TOL), the nation’s leading builder of luxury homes, announced the grand opening of its highly anticipated Dancy model home at Enclave by Toll Brothers in Corona, California. The public is invited to the Model Grand Opening event taking place this Saturday, September 19, from 11 a.m. to 2 p.m. at 515 Abeja Drive in Corona.

Enclave by Toll Brothers

Enclave by Toll Brothers is an intimate community of just 35 home sites, offering modern luxury living in a serene setting. This exclusive community features single-family homes priced from approximately $1.47 million. The newly unveiled Dancy model home showcases exquisite architecture, a spacious floor plan, and luxurious finishes, making it a must-see for home shoppers seeking a high-end living experience in Riverside County.

“We are thrilled to debut the Dancy model at Enclave by Toll Brothers, an intimate community that redefines luxury living in Corona,” said Brad Hare, Group President of Toll Brothers in Southern California. “The unmatched design and attention to detail in this model reflect the sophisticated lifestyle that home shoppers can expect in this extraordinary community.”

Enclave by Toll Brothers

Toll Brothers customers will experience one-stop shopping at the Toll Brothers Design Studio. The state-of-the-art Design Studio allows home shoppers to choose from a wide array of selections to personalize their dream home with the assistance of Toll Brothers professional Design Consultants.

Enclave by Toll Brothers offers a selection of spacious one- and two-story home designs with 5 bedrooms, 4 to 5 bathrooms, and 3- to 4-car garages. The open-concept floor plans are designed for luxury living and entertaining, featuring gourmet kitchens, expansive great rooms, and indoor/outdoor living spaces. Residents will also appreciate the convenient location near top-rated schools, upscale shopping and dining opportunities, as well as access to local parks and recreational areas.

Enclave by Toll Brothers

For more information or to schedule a tour of the new Dancy model home, call 866-232-1631 or visit TollBrothers.com/CA.

About Toll Brothers

Toll Brothers, Inc., a Fortune 500 Company, is the nation’s leading builder of luxury homes. The Company was founded in 1967 and became a public company in 1986 with common stock listed on the New York Stock Exchange under the symbol “TOL.” Toll Brothers builds new homes and communities in over 60 markets across the United States, serving first-time, move-up, active-adult, and second-home buyers. The Company also operates its own architectural, engineering, mortgage, title, land development, smart home technology, landscape, and building components manufacturing businesses.

Toll Brothers was named the #1 Most Admired Home Builder in Fortune magazine’s 2026 list of the World’s Most Admired Companies®, the ninth year the Company has achieved this honor. Toll Brothers has also been named Builder of the Year by Builder magazine and is the first two-time recipient of Builder of the Year from Professional Builder magazine. For more information visit TollBrothers.com.

From Fortune, ©2026 Fortune Media IP Limited. All rights reserved. Used under license.

Contact: Andrea Meck | Toll Brothers, Senior Director, Public Relations & Social Media | 215-938-8169 | ameck@tollbrothers.com

Photos accompanying this announcement are available at

https://www.globenewswire.com/NewsRoom/AttachmentNg/20be7196-349e-4864-8e90-380f4b7cd374

https://www.globenewswire.com/NewsRoom/AttachmentNg/4eb9c627-fdfa-4741-9feb-7f7b8f18d5b4

https://www.globenewswire.com/NewsRoom/AttachmentNg/d5c2f9f7-a24f-452d-8129-da165c2bbdd0

Sent by Toll Brothers via Regional Globe Newswire (TOLL-REG)

Amsterdam, September 16, 2026

SBM Offshore reports the transaction details related to its EUR227 million (US$270 million1) share repurchase program for the period September 10, 2026 through September 16, 2026.

The repurchases were made under the EUR227 million share repurchase program announced on February 26, 2026 and effective from February 27, 2026. The objective of the program is to reduce share capital and, in addition, to provide shares for regular management and employee share programs. Information regarding the progress of the share repurchase program and the aggregate of the transactions (calculated on a daily basis) for the period February 27, 2026 through September 16, 2026 can be found in the top half of the table below. Further detailed information regarding both the progress of the share repurchase program and all individual transactions can be accessed via the Investors section of the Company’s website.

Share Repurchase Program    
       
Overall progress Share Repurchase Program:    
         
Total Repurchase Amount   EUR 226,633,158  
Cumulative Repurchase Amount   EUR 126,334,023  
Cumulative Quantity Repurchased   3,735,031  
Cumulative Average Repurchase Price   EUR 33.82  
Start Date     February 27, 2026  
Percentage of program completed as of September 16, 2026 55.74%  
         
Overview of details of last 5 trading days:    
         
Trade Date Quantity Repurchased Average Purchase Price Settlement Amount  
September 10, 2026 24,894 EUR 35.99 EUR 895,992  
September 11, 2026 25,141 EUR 35.64 EUR 895,988  
September 14, 2026 25,121 EUR 35.67 EUR 895,971  
September 15, 2026 25,272 EUR 35.45 EUR 895,976  
September 16, 2026 24,577 EUR 36.46 EUR 895,999  
Total 125,005 EUR 35.84 EUR 4,479,925  

All shares purchased via Euronext Amsterdam, CBOE DXE, Turquoise Europe and or Aquis Europe.

This press release contains information which is to be made publicly available under the Market Abuse Regulation (nr. 596/2014). The information concerns a regular update of the transactions conducted under SBM Offshore’s current share repurchase program, as announced by the Company on February 26, 2026, details of which are available on its website.

Corporate Profile

SBM Offshore is a global leader in deepwater ocean infrastructure, delivering floating production solutions across the full asset lifecycle—from design and construction to installation and operation. Supported by a global team of more than 8,000 professionals, the Company operates a long-term, asset-backed business model that delivers high-availability assets and predictable cash flows. SBM Offshore combines engineering expertise, operational reliability, and selective innovation to support safe, efficient, and lower-carbon energy production, while extending its capabilities into new opportunities across the blue economy.

For further information, please visit our website at www.sbmoffshore.com.

Financial Calendar   Date Year
Third Quarter 2026 Trading Update   November 12 2026
Full Year 2026 Earnings   February 18 2027
Annual General Meeting   April 7 2027
First Quarter 2027 Trading Update   May 5 2027
Half Year 2027 Earnings   August 5 2027

For further information, please contact:

Investor Relations
Wouter Holties
Corporate Finance & Investor Relations Manager

Mobile: +31 (0) 2 02 36 32 36
E-mail: wouter.holties@sbmoffshore.com
Website: www.sbmoffshore.com

Media Relations

Giampaolo Arghittu
Head of External Relations

Phone: +31 (0) 6 212 62 333 / +39 33 494 79 584
E-mail: giampaolo.arghittu@sbmoffshore.com
Website: www.sbmoffshore.com

Market Abuse Regulation

This press release may contain inside information within the meaning of Article 7(1) of the EU Market Abuse Regulation.

Disclaimer

Some of the statements contained in this release that are not historical facts are statements of future expectations and other forward-looking statements based on management’s current views, expectations and various assumptions regarding the financial and non-financial position of SBM Offshore N.V., anticipated developments and other factors, and involve known and unknown risks, dependencies and uncertainties that could cause actual results, performance, or events to differ materially from those in such statements. These statements may be identified by words such as ‘expect’, ‘should’, ‘could’, ‘shall’ and / or similar expressions. Such forward-looking statements are subject to various risks and uncertainties. The principal risks which could affect the future operations of SBM Offshore N.V. are described in the ‘Impacts, Risks and Opportunities’ section of the 2025 Annual Report.

Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results and performance of the Company’s business may vary materially and adversely from the forward-looking statements described in this release. SBM Offshore N.V. does not intend and does not assume any obligation to update any industry information or forward-looking statements set forth in this release to reflect new information, subsequent events or otherwise.

Data underpinning certain disclosures – particularly sustainability-related – may be subject to inherent limitations. These limitations include but are not limited to reliance on third party data providers whose data quality, completeness and integrity may differ; the use of estimates and assumptions where actual data is unavailable or incomplete; and dependencies on value chain partners for timely and accurate information provision. Methodologies, standards and regulatory requirements for measuring and reporting information—especially sustainability related information—continue to evolve. As a result, our measurement approaches and reported figures may be refined over time as more accurate, granular or standardized data becomes available. Accordingly, all data, and emissions data in particular, should be interpreted in light of these limitations and the ongoing maturation of sustainability reporting practices across our value chain.

This release contains certain alternative performance measures (APMs) as defined by the ESMA guidelines which are not defined under IFRS. Further information on these APMs is included in the Half Year Management Report accompanying the Half Year Earnings 2026 report, available on our website Half Year Earnings – SBM Offshore.

Nothing in this release shall be deemed an offer to sell, or a solicitation of an offer to buy, any securities. The companies in which SBM Offshore N.V. directly and indirectly owns investments are separate legal entities. In this release “SBM Offshore” and “SBM” are sometimes used for convenience where references are made to SBM Offshore N.V. and its subsidiaries in general. These expressions are also used where no useful purpose is served by identifying the particular company or companies.

“SBM Offshore®“, the SBM logomark, “Fast4Ward®”, and “F4W®” and “Imodco®” are proprietary trade marks owned by SBM Offshore.


1 Based on the EUR/US$ forward exchange rate on February 18, 2026.

Attachment

September 16, 2026 | SAINT HELIER, Jersey — CoinShares PLC (“CoinShares” or the “Company”) (Nasdaq: CSHR), a leading global asset manager specialising in digital assets, today announced that shareholders approved all resolutions put to them at the Company’s Extraordinary General Meeting (the “EGM”) held on Tuesday, 15 September 2026, including authority for the Company to repurchase up to 25% of its outstanding ordinary shares and the adoption of the CoinShares PLC 2026 Equity Incentive Plan.

The repurchase authority provides the Board with an additional capital allocation tool. Based on approximately 131.8 million ordinary shares outstanding, the authority represents capacity to repurchase up to approximately 32.9 million ordinary shares. The authority conferred by this resolution will expire on September 15, 2031.

The authority establishes the maximum capacity available to the Board and does not require the Company to repurchase any specific number or value of shares. The Company does not currently expect to utilise the authority in full. Any decision to repurchase shares will take into account market conditions, the Company’s financial position, alternative uses of capital and applicable legal and regulatory requirements.

Shareholders also approved the adoption of the CoinShares PLC 2026 Equity Incentive Plan in its entirety. The Plan is designed to allow the previously approved equity pool to be implemented efficiently across the jurisdictions in which CoinShares operates, without increasing the number of shares reserved under the Plan.

Jean-Marie Mognetti, Co-Founder and Chief Executive Officer of CoinShares, commented:

“Shareholder approval gives us the flexibility to act when we believe the market price of CoinShares materially understates the long-term value of the business.

“We entered the second half with approximately $453 million of net assets, $413.9 million of Available Capital and no long-term debt. Our business also remained Segment EBITDA positive through a difficult first half for digital assets and continued to generate positive net inflows.

“We have operated through multiple digital asset cycles and understand the importance of maintaining a strong balance sheet. Capital also needs to earn an appropriate return. Where our shares trade at a material discount to what we believe is their intrinsic value, repurchasing our own equity can represent an attractive use of capital.

“We are not choosing between returning capital and investing for growth. Our balance sheet gives us the capacity to do both, and we will remain disciplined in allocating capital among organic growth, strategic opportunities and potential share repurchases. The same discipline applies to equity incentives: we want our people aligned with shareholders while remaining disciplined about dilution.”

Extraordinary General Meeting

The EGM was held as a virtual meeting on September 15, 2026, with voting on all resolutions conducted by way of a poll. All four resolutions, as set out in the notice of the EGM, were duly passed.

The full voting results will be made available on the Company’s Investor Relations website as soon as practicable and will be furnished to the U.S. Securities and Exchange Commission on a Report of Foreign Private Issuer on Form 6-K.

Forward-Looking Statements

This press release contains forward-looking statements within the meaning of the United States Private Securities Litigation Reform Act of 1995. These forward-looking statements include, without limitation, statements regarding potential share repurchases, capital allocation, market conditions, future growth opportunities, and CoinShares’ business and strategy.; and other statements identified by words such as “believes,” “expects,” “may,” and “will”. These statements involve known and unknown risks, uncertainties, and other factors that may cause actual results to differ materially from the anticipated results or other expectations expressed in such forward-looking statements. Additional risk factors are described in the Company’s Annual Report on Form 20-F for the fiscal year ended December 31, 2025, and other filings and submissions with the U.S. Securities and Exchange Commission. CoinShares does not undertake any obligation to update any forward-looking statements to reflect events or circumstances after the date of this press release, except as required by law.

About CoinShares

CoinShares is a leading global asset manager specialising in digital assets, delivering a broad range of financial services across investment management, trading and securities to a wide array of clients, including corporations, financial institutions and individuals. Focusing on crypto since 2013, the firm is headquartered in Jersey, with offices in France, Sweden, Switzerland, the UK and the US.

CoinShares’ affiliated entities are regulated in Jersey by the Jersey Financial Services Commission, in France by the Autorité des marchés financiers, and in the US by the Securities and Exchange Commission, National Futures Association and Financial Industry Regulatory Authority. CoinShares is publicly listed on Nasdaq under the ticker CSHR.

Investor Relations | investor.coinshares.com | corporateir@coinshares.com

MONTRÉAL, Sept. 16, 2026 (GLOBE NEWSWIRE) — Air Canada today congratulated Mark Nasr, Executive Vice President & Chief Operations Officer, on being named to Canada’s Top 40 Under 40 Award for 2026, one of the country’s leading recognitions of exceptional achievement, leadership and community contribution by Canadians under the age of 40.

Mark Nasr, Executive Vice President & Chief Operations Officer, named to Canada’s Top 40 Under 40 Award for 2026.

Mark is responsible for delivering all aspects of safe, reliable and efficient operations, and elevating the customer experience throughout Air Canada’s worldwide network. He has additional oversight for flight operations, the System Operations Control Centre, maintenance and engineering, airports, in-flight service, contact centres, international operations, crew planning and scheduling, regional express carriers, and onboard cabins and systems.

“Mark’s recognition as one of Canada’s Top 40 Under 40 is a fitting tribute to the breadth of his accomplishments and the impact he has had on Air Canada. From leading the transformation of Aeroplan into Canada’s premier loyalty program, to advancing our digital capabilities, customer experience, product strategy and global brand, Mark has consistently combined vision, innovation and disciplined execution. In his current role, he brings that same energy and focus to engaging with and supporting our frontline colleagues, while keeping the needs of customers and the communities we serve at the centre of our decisions. Mark is an exceptional leader, and we are proud to see his achievements recognized nationally,” said Vagn Sørensen, Chair of the board of directors of Air Canada.

Before assuming his current role, Mark served as Executive Vice President, Marketing & Digital and President, Aeroplan. In that capacity, he oversaw the design of Air Canada’s products, services and customer amenities, as well as the airline’s brand, marketing communications and commercial sponsorships. He also led the airline’s global technology portfolio, including all aspects of IT, data and digital supporting the company.

Mark was instrumental in the recent launch of Air Canada’s Glowing Hearted brand experience, including the next generation of aircraft interiors that debuted on the Airbus A321XLR and that will roll out across the fleet over the next years. That same design ethos now guides the look and feel of the airline’s lounges, check-in areas, service standards, Air Canada’s website as well as its mobile app.

The roll-out of fast, free Wi-Fi for Aeroplan Members was also spearheaded by Mark’s team, further elevating the customer experience on board. Mark oversaw the improvement of the amenities and customer offerings across all cabins at Air Canada, with the notable introduction of premium snacks, complimentary wine and beer on every flight, and the ongoing cabin upgrades to the airline’s North American fleet.

For more information on Mark’s career, please visit his biography on Air Canada’s website here.

About Canada’s Top 40 Under 40 

Founded in 1995 by Caldwell, Canada’s Top 40 Under 40 is one of Canada’s most recognized awards for outstanding young leaders. Honourees are young professionals from a diverse range of sectors across Canada. Top 40 alumni now include hundreds of nationally and internationally prominent CEOs, executives, entrepreneurs and community leaders in the private, public, and social economy sectors.

The independent Top 40 Advisory Board, comprising 18 respected leaders from across Canada, met on June 10, 2026, to select the honourees from a list developed by Caldwell. Candidates were assessed on five key criteria: Career Progression, Leadership, Vision & Innovation, Community Involvement & Corporate Social Responsibility, and Impact & Influence.

About Air Canada

Air Canada is Canada’s largest airline, the country’s flag carrier and a founding member of Star Alliance, the world’s most comprehensive air transportation network. Headquartered in Montréal, Air Canada provides scheduled service directly to more than 180 airports in Canada, the United States and internationally on six continents. It holds a Four-Star ranking from Skytrax. Air Canada’s Aeroplan program is Canada’s premier travel loyalty program, with more than 10 million members worldwide. Members can earn or redeem points on the world’s largest airline partner network of more than 50 airlines, plus through an extensive range of merchandise, hotel and car rental partners. Through Air Canada Vacations, it offers a selection of vacation and Flight & Hotel packages, tours, cruises, car rentals, and experiences. Its freight division, Air Canada Cargo, provides air freight lift and connectivity to hundreds of destinations across six continents using Air Canada’s passenger and freighter aircraft. Air Canada’s climate-related ambition includes a long-term aspirational goal of net-zero greenhouse gas emissions by 2050. For additional information, please see Air Canada’s TCFD disclosure. Air Canada shares are publicly traded on the TSX (AC).

Contacts:        media@aircanada.ca

Internet:          aircanada.com/media

Read our annual report Here

Sign up for Air Canada news: aircanada.com

Media Resources:
Photos
Videos
B-Roll
Articles

A photo accompanying this announcement is available at:
https://www.globenewswire.com/NewsRoom/AttachmentNg/b164fe8a-6a92-40b8-b50c-f567ac98e1aa

PITTSBURGH, Sept. 16, 2026 (GLOBE NEWSWIRE) — L.B. Foster Company (Nasdaq: FSTR, the “Company”), announced today that Bill Thalman, Executive Vice President and Chief Operating Officer, and Sean Reilly, Senior Vice President and Chief Financial Officer, will present virtually at the Sidoti Small Cap Virtual Conference on September 23, 2026, beginning at 1:45 PM EDT. Presentation materials for the conference will be posted on the Company’s Investor Relations website under “Presentations” the morning of the conference.

A video webcast and a video replay will be available online. A webcast registration link will be available on the L.B. Foster website: www.lbfoster.com, under the Investor Relations page, on the day of the event. Video replay will remain available for 90 days.

About L.B. Foster Company
Founded in 1902, L.B. Foster Company is a global technology solutions provider of products and services for the rail and infrastructure markets. The Company’s innovative engineering and product development solutions address the safety, reliability, and performance needs of its customers’ most challenging requirements. The Company maintains locations in North America, South America, Europe, and Asia. For more information, please visit www.lbfoster.com.

Investor Relations:
Lisa Durante
412-928-3400, and follow the prompts
investors@lbfoster.com

L.B. Foster Company
415 Holiday Drive
Suite 100
Pittsburgh, PA 15220

WASHINGTON and HOMEWOOD, Ill., Sept. 16, 2026 (GLOBE NEWSWIRE) — CN (TSX: CNR) (NYSE: CNI) U.S. rail subsidiaries (Illinois Central Railroad Company and Grand Trunk Western Railroad Company, together “CN”) and the National Railroad Passenger Corporation (Amtrak) today announced that they have reached agreements that strengthen their partnership and support safe, reliable passenger and freight service on CN’s U.S. rail network.

The parties have signed a new eight-year operating agreement governing Amtrak service on CN owned rail lines. The agreement resolves a more than decade-long proceeding before the Surface Transportation Board (STB) concerning the terms and conditions for Amtrak services such as the City of New Orleans, Illini/Saluki, and Wolverine.

The operating agreement establishes an updated framework for CN and Amtrak to work together, including a revised performance payment system more closely aligned with the Federal Railroad Administration’s (FRA) on-time performance standard, regular reviews of Amtrak’s schedules, and processes to address operational issues and resolve disputes.

In addition, the parties will work together on a process for Amtrak to equip its trains operating on CN’s network with Onboard Shunt Enhancers (OSEs), a technology that improves how trains are detected as they approach rail grade crossings. OSEs help ensure crossing warning systems, including gates, flashing lights and bells, activate when they should. OSEs both improve safety and provide greater operating flexibility, supporting improved on-time performance for passenger rail service while helping freight and passenger traffic move efficiently across corridors Amtrak shares with CN.

“CN is pleased to have reached agreements that allow us to move forward with a clear framework for safely and efficiently sharing our network. Together with the deployment of OSE technology, these agreements will support safer grade crossings and reliable passenger and freight service.”

– Patrick Whitehead, Executive Vice-President and Chief Operating Officer, CN 

“These agreements give Amtrak and CN a strong foundation to move forward together and deliver efficient, reliable passenger rail service. Together, we are improving performance for our passengers while investing in technology that enhances safety in the communities we serve. With steady encouragement from the STB and grant approval from FRA, we are able to bring this train into the station.”

– Byl Herrmann, Interim President, Amtrak 

Installation of OSEs is supported through FRA funding and builds on more than a decade of research and testing led by CN, Amtrak and the FRA.

The parties expressed gratitude to the FRA for its leadership and investment in OSE technology and to the STB for its guidance and encouragement, which was instrumental in helping the parties amicably resolve their long-running operating agreement dispute.

About CN
CN powers the economy by safely transporting more than 300 million tons of natural resources, manufactured products, and finished goods throughout North America every year for its customers. With its nearly 20,000-mile rail network and related transportation services, CN connects Canada’s Eastern and Western coasts with the U.S. Midwest and the U.S. Gulf Coast, contributing to sustainable trade and the prosperity of the communities in which it operates since 1919.

About Amtrak
Amtrak is seizing a once-in-a-lifetime opportunity to transform rail and Retrain Travel. By modernizing, enhancing, and expanding trains, stations, and infrastructure, Amtrak is meeting the rising demand for train travel. Amtrak offers unforgettable experiences to more than 500 destinations across 46 states and parts of Canada. Learn more at Amtrak.com, download the Amtrak app, connect with us on X, Instagram, Facebook, and LinkedIn, and join Amtrak Guest Rewards for free to start earning points toward Amtrak reward travel, upgrades, lounge access and more.

Contacts:  
Media Investment Community
Ashley Michnowski Jamie Lockwood
Senior Manager         Vice-President
Media Relations Investor Relations and Special Projects
(438) 596-4329 (514) 399-0052
media@cn.ca investor.relations@cn.ca

HIGHLIGHTS

  • Zone 1 gold mineralization now extends below 700 meters and remains open at depth.
     
  • Zone 1 mineralisation extends directly from surface.
     
  • 2.34 g/t Au over 9.34 metres intersected in Zone 2 as the Company advances geological interpretation and plans next phase of drilling.
     
  • The zone 1 eastern shoot, outlined by Hole NO-26-21a (4.92 g/t gold over 11.37 metres) located approximately 200 metres below NO-26-07 (8.22 g/t gold over 8.5 metres), will be a major focus of our next drill program.

MONTREAL, Sept. 16, 2026 (GLOBE NEWSWIRE) — Opus One Gold Corp. (TSX-V: OOR) (the “Company” or “Opus One”) is pleased to announce the final assay results from its 2026 drilling program on its 100%-owned Noyell Gold Property, located in the northern portion of the Abitibi Greenstone Belt near Matagami, Quebec.

Those final results are completing a successful 2026 drilling campaign that significantly advanced the Company’s understanding of the Noyell property gold system. Released drill holes true width values were calculated using Geotic Log software.

Most importantly, drilling has now traced the Zone 1 gold-mineralized structure continuously from surface down to approximately 750 metres vertical depth, where it remains open at depth.

The 2026 program also identified a strong mineralized vector in the eastern portion of Zone 1, highlighted by previously announced hole NO-26-21a, which returned 4.92 g/t Au over 11.37 metres (9.08 metres true width) at approximately 700 metres vertical depth (June 17h, 2026 press release)

In addition, Opus One’s first drilling program, approximately 3 kilometres west of Zone 1 at the West boundary of Noyell property, successfully intersected gold mineralization in all five holes drilled across approximately 800 metres of strike at the newly explored Zone West, providing the Company with a second priority area for follow-up drilling.

2026 NOYELL PROGRAM HIGHLIGHTS

  • Zone 1 has now been traced continuously from surface to approximately 750 metres vertical depth and remains open at depth.
  • Previously reported hole NO-26-21a returned 4.92 g/t Au over 11.37 metres, (June 17th, 2026, press release) including a true width of 9.08 metres, representing the deepest significant Zone 1 intersection drilled by Opus One to date.
  • Previously reported hole NO-26-07 returned 8.22 g/t Au over 8.5 metres (7.16 metres true width) (May 7th, 2026, press release), including 49.1 g/t Au over 1.34 metres.
  • Hole NO-26-18 returned 2.34 g/t Au over 9.34 metres in Zone 2, an unusually broad mineralized intersection for Zone 2 that warrants additional geological evaluation.
  • The eastern portion of Zone 1 has emerged as the principal vector for potential depth extension, particularly below NO-26-21a.
  • First-pass drilling at Zone West, approximately 3 kilometres west of Zone 1, intersected gold mineralization. All five holes drilled across approximately 800 metres of strike intersected gold mineralization.
  • Zone West remains sparsely drilled and has not yet been tested below 300 metres vertical depth.
  • Geological compilation and reinterpretation of both Zone 1 and Zone West are underway to establish priorities for the next phase of drilling.

FINAL ZONE 1 RESULTS FOR 2026

Opus One has now received assay results from the final five drill holes completed at Zone 1 during the 2026 program. (Tables 1 and 2)

Hole NO-26-08 was designed to test the potential western extension of Zone 1 at approximately 300 metres vertical depth. Both Zones 1 and 2 returned marginal gold values, consistent with the Company’s geological interpretation that the western portion of Zone 1 weakens in this area until further drilling is performed in this area.

Hole NO-26-18 was drilled to test an interpreted west-dipping mineralized trend associated with Zone 1. Zone 1 returned marginal gold values, suggesting that the interpreted trend may not continue in this area, as originally anticipated.

However, Zone 2 produced an unexpected and potentially significant intersection of 2.34 g/t Au over 9.34 metres.

The width and grade of this intersection are noteworthy for Zone 2, which has generally returned narrower and lower-grade intersections. The Company intends to incorporate this result into its ongoing geological interpretation to determine whether it represents a locally developed mineralized shoot or a potentially more significant target.

The remaining holes, NO-26-14a, NO-26-19 and NO-26-23b, were designed primarily to test the vertical continuation of Zone 1.

All three holes intersected Zone 1 at the anticipated geological position.

Combined with the Company’s previously reported results, these holes have helped refine the interpretation of the mineralized system and indicate that the strongest vector for continued depth exploration is located in the eastern portion of Zone 1, around and below hole NO-26-21a.

ZONE 1 – A GOLD SYSTEM OPEN AT DEPTH

The 2026 program represents an important step forward in defining the geometry and scale of Zone 1.

Following the Company’s 2025 drilling campaign, Zone 1 was identified from surface to approximately 500 metres vertical depth.

The 2026 program has now extended the known mineralized structure to approximately 750 metres vertical depth, while confirming significant gold grades and widths along the principal eastern mineralized shoot.

Among the key previously reported 2026 intersections are:

NO-26-07:
8.22 g/t Au over 8.5 metres
(May 7th, 2026, press release)
(true width: 7.16 metres), including intersection of 49.1 g/t Au over 1.34 metres

NO-26-21a:
4.92 g/t Au over 11.37 metres
(June 17th,2026, press release)
(true width: 9.08 metres)

NO-26-21a was drilled approximately 200 metres vertically below NO-26-07 on the same cross-section, providing an important indication of the vertical continuity of the high-grade eastern mineralized shoot.

Importantly, the Zone 1 mineralized structure remains open at depth.

The area below NO-26-21a will therefore represent a priority target as Opus One develops its next drilling program.

A SECOND EXPLORATION FRONT AT ZONE WEST

The 2026 program also marked Opus One’s first drilling of the western portion of the Noyell Property, approximately 3 kilometres west of Zone 1.

Five exploratory holes totalling 1,467 metres were completed over approximately 800 metres of strike.

Every hole intersected the targeted geological structure and returned significant gold values above 300 metres vertical depth.

Previously announced results included (September 2nd, 2026, press release)

  • 1.03 g/t Au over 8.90 metres in NO-26-09;
  • 3.48 g/t Au over 1.19 metres in a second mineralized zone in NO-26-09;
  • 0.50 g/t Au over 10.41 metres in NO-26-16;
  • 1.11 g/t Au over 3.96 metres in NO-26-17;
  • 1.34 g/t Au over 8.29 metres in NO-26-20; and
  • 1.18 g/t Au over 9.07 metres in NO-26-22.

The new Zone West geological environment differs materially from Zone 1 and includes alternating sheared sedimentary and volcanic rocks.

The mineralization occurs within a broader altered and sulphide-bearing structural package and remains sparsely tested.

With gold mineralization now identified over approximately 800 metres of strike and no drilling yet completed below approximately 300 metres vertical depth, Opus One considers Zone West an important target for future definition and exploration drilling.

NEXT STEPS

With all 2026 assay results now received, the Company’s geological team is integrating the complete drill database into an updated geological and structural interpretation of the Noyell Property.

The work will focus particularly on:

  1. defining the continuation of the high-grade eastern shoot of Zone 1 below NO-26-21a;
  2. evaluating the significance and continuity of the broad Zone 2 intersection in NO-26-18;
  3. refining the geometry of Zone 1 between surface and approximately 750 metres vertical depth; and
  4. developing follow-up drill targets across the approximately 800-metre mineralized trend identified at Zone West.

The resulting interpretation will be used to establish priorities for the Company’s next phase of drilling.

CEO COMMENT

Louis Morin, President and CEO of Opus One Gold, commented:

“The 2026 program has materially advanced our understanding of Noyell. A year ago, our drilling had identified Zone 1 to approximately 500 metres vertical depth. We have now followed the mineralized structure from surface, down to approximately 750 metres, and most importantly, it remains open at depth.

The most important development for Zone 1 is that we believe we have identified the principal vector to be  followed deeper. Hole NO-26-21a returned 4.92 g/t gold over 11.37 metres at approximately 700 metres vertical depth, approximately 200 metres below NO-26-07, which returned 8.22 g/t gold over 8.5 metres. This eastern shoot will be a major focus of our next phase of drilling.

At the same time, our first drilling program at our new Zone West has given us another area to advance. Every drill hole intersected gold mineralization across approximately 800 metres of strike, and the system has only been tested at shallow depths. We now have two distinct areas identified at Noyell, where additional drilling can potentially expand the mineralized footprint.

Our geological team is integrating all the 2026 results into an updated model. The objective is straightforward: follow the strongest portion of Zone 1 deeper while beginning to systematically define the scale and potential of Zone West.”

LAST DRILL HOLE COORDINATES (Table 1)

LAST DRILL HOLE COORDINATES (Table 1)

LAST ASSAY RESULTS (Table 2)

LAST ASSAY RESULTS (Table 2)

DRILL HOLE LOCATION MAP – ZONE 1

DRILL HOLE LOCATION MAP – ZONE 1

LONGITUDINAL SECTION – ZONE 1

LONGITUDINAL SECTION – ZONE 1

Sample preparation, analysis and QAQC program

All core recovered is NQ size.  All samples are described, labelled, cut (diamond saw) and bagged at Technominex’ facilities in Rouyn-Noranda.  Samples are then shipped to AGAT certified Laboratory in Val D’or for preparation and analysis.  Samples are assayed for gold using Fire Assay – Trace Au, ICP-OES finish (50g charge).  All samples equal or above 10 g/t Au are submitted to ore grade gravimetric finish. Multi element analysis is performed using Aqua Regia Digest – Metals Package, ICP-OES finish.

Opus One’s QAQC program consists of one control sample inserted, at Technominex’ facility, after 9 regular samples. Control samples consist of a certified blank and various gold grades certified material.

OPUS ONE GOLD CORPORATION INC.

Opus One Gold Corporation Inc. is a mining exploration company focused on discovering high-quality gold and base metals deposits within strategically located properties in proven mining camps, close to existing mines in the Abitibi Greenstone Belt, north-western Quebec and north-eastern Ontario – one of the most prolific gold mining areas in the world. Opus One holds assets in the Val-d’Or and Matagami mineral districts.

An independent qualified person, Pierre O’Dowd P.Geo, has verified and approved the data disclosed, including sampling, analytical, and test data underlying the information or opinions contained in the written disclosure as required by section 3.1 and 3.2 of NI43-101.

Forward-Looking Statements

This news release contains statements that may constitute “forward-looking information” within the meaning of applicable Canadian securities legislation. Forward-looking information may include, among others, statements regarding the future plans, costs, objectives or performance of Opus One, or the assumptions underlying any of the foregoing. In this news release, words such as “may”, “would”, “could”, “will”, “likely”, “believe”, “expect”, “anticipate”, “intend”, “plan”, “estimate” and similar words and the negative form thereof are used to identify forward-looking statements. Forward-looking statements should not be read as guarantees of future performance or results, and will not necessarily be accurate indications of whether, or the times at or by which, such future performance will be achieved. No assurance can be given that any events anticipated by the forward-looking information will transpire or occur, including the anticipated exploration program on the project, the results of such exploration program, the development of the project and what benefits Opus One will derive from the project, the expected demand for lithium. Forward-looking information is based on information available at the time and/or management’s good-faith belief with respect to future events and are subject to known or unknown risks, uncertainties, assumptions, and other unpredictable factors, many of which are beyond Opus One’ control.

These risks, uncertainties and assumptions include, but are not limited to, those described under “Financial Instruments” and “Risk and Uncertainties in Opus One’ Annual Report for the fiscal year ended August 31st, 2025, a copy of which is available on SEDAR at www.sedar.com and could cause actual events or results to differ materially from those projected in any forward-looking statements. Opus One does not intend, nor does Opus One undertake any obligation, to update or revise any forward-looking information contained in this news release to reflect subsequent information, events or circumstances or otherwise, except if required by applicable laws.

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of the release.

For more information, please contact:

Louis Morin

Chief Executive Officer & Director

Tel.: (514) 591-3988

Michael W. Kinley, CPA, CA

President, Chief Financial Officer & Director

Tel: (902) 402-0388

info@OpusOneGold.com

Visit Opus One’s website: www.OpusOneGold.com

OPUS ONE’S NOYELL PROPERTY LOCATION MAPS

OPUS ONE’S NOYELL PROPERTY LOCATION MAPS

OPUS ONE’S NOYELL PROPERTY LOCATION MAPS

PROPERTY GEOLOGY AND GOLD TARGETS

PROPERTY GEOLOGY AND GOLD TARGETS

Photos accompanying this announcement are available at https://www.globenewswire.com/NewsRoom/AttachmentNg/ddbd2ad3-52be-4824-af3f-5a13be90e83d

https://www.globenewswire.com/NewsRoom/AttachmentNg/fff55170-95dd-4993-8a80-5178c5cd9cd7

https://www.globenewswire.com/NewsRoom/AttachmentNg/cbe20469-e40b-4119-97bf-e286f577bd15

https://www.globenewswire.com/NewsRoom/AttachmentNg/5b9503d7-203d-47e3-aca0-78e7d62202d1

https://www.globenewswire.com/NewsRoom/AttachmentNg/12aa4ded-904e-4343-83c2-2247f07eacd3

https://www.globenewswire.com/NewsRoom/AttachmentNg/50b8df53-5430-41e0-9fe1-542cedfee605

https://www.globenewswire.com/NewsRoom/AttachmentNg/f1018d70-7842-4ef6-abd5-e6c2af926fb4

 

Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.